Asphalt cold planer SAKAI HEAVY INDUSTRIES LTD

POWERFUL WORK
•Powerful Engine
The 400kw (537hP) engine offers powerful cutting force. The working time and cost can be dramatically slashed. The engine complies to the EPA's tough emission regulations.
•Deep cut
The ER551F can cut up to 230mm (9") in one pass. When shaving off bumps, the working speed is max. 60m/min (197ft./min.)
•Transit Speed
The pneumatic tire mounted design and a 0-25km/h (0-15.5mile/h) transit speed eliminate the need of a trailer for transporting the machine from one job site to another, which means slashing local transportation cost.

SLASHING PERFORMANCE
•Flush-cut Along Curbs
The ER551F can flush-cut right up to the curb or other obstacles hanks to the 400mm(15.7") curb clearance and 105mm (4") side clearance on each side.
•Drum Shift System
The cutter drum can shift up to 450mm(17.7") to each side. The feature enables the ER551F to cut through the lane without shifting the entire machine to avoid manholes or other obstacles.
•Operating Control
A set of operating controles is located in 3 places, on the top of the poerator station, and to the right and left of the cutter drum. The operator can choose the most ideal position from which to work.

EASY TO OPERATE ACCS
•ACCS (Automatic Cutter Control System)
The ER551F is equipped with a computenzed ACCS. The operator is free from concentrating on machine operation and he can observe the entire job area and conditions.
•Auto Cutting Mode
The ER551F shall automatically perform its job along the guide line according to pre-set cutting orders. The manual override is allowed during Auto mode operation.