Actuator AG04B Fieldbus
Fieldbus
High-performance actuator for complex positioning tasks
Profile AG04B Fieldbus:
Easy mounting
Stainless steel hollow shaft up to max. ø20 mm
"manual" traveling without control unit by means of operator keys
Brushless 160 W, 24 V DC motor with long service life
Integrated absolute position encoder on the output shaft
Electrical connection via spring terminals or connector
Integrated positioning controller
Integrated fieldbus interface
Integrated spring-operated brake (option)
Mechanical data
Feature
Technical data
Additional information
Shaft - stainless Steel -
Housing - aluminum -
Nominal torque/rated speed - 6 Nm at 150 rpm {±10 %) - i = 30.6 {max. adm. operating point)
- 10 Nm at 90 rpm {±10 %) - i = 50 {max. adm. operating point)
- 14 Nm at 64 rpm {±10 %) - i = 70.8 {max. adm. operating point)
Operating mode - S3 intermittent duty: 25 % DC. 10 min. - EN 60034-1
Weight - '3.2 kg -
Electrical data
Feature - Technical data - Additional information
Operating voltage - 24 V DC ±10 % - reverse polarity protected
Power input - '160 W -
Parameter st orage - 105 cydes - also applies to calibration operations
Rated current - 6 A ±5 % -
No-load current - 350 mA ±20 % - (with transmission)
Type of connection - 5x PG9. terminal strip - 0.13... 2.5 mm2 or 0.25 ... 1.5 mm2 (E1/PG)
- 2x M16 plug connectors - 3-pole. 1x pin; 7-pole. 1x pin (EX)
- 2x M12 plug connectors {B-coded) - 5-pole. 1x pin. 1x socket (EX)