Multi notcher Simasv
CE

SIMASV NOTCHING MACHINES WITH FIXED AND VARIABLE ANGLE

AF258P
The fixed angle notching machine AF.258/P is prearranged for the mounting of the punch head.
The shearing head is mounted on rigid columns to prevent load oscillation of the head during the punching phase. However, during the notching phase the shearing head must be able to oscillate in the four directions to allow the auto-adjustment of the upper blades with respect to the lower ones. For this purpose two locking levers are set to the rear of the machine with the function of blocking or unblocking the head depending on whether the machine is punching or notching.

AV226PA
The auto-adjustment patented system between the upper and the lower blades allows simultaneous cutting of different thicknesses.
The AV/PA version is predisposed for the mounting of a punching head for carrying out drilling, beading, nibbling, shutter slits, straight cuts and so on. There is also the option of activating the cutting or punching unit via the special reversing button.
The cutting capacity of variable angle notching machine is of 6 mm. thickness, and the cutting angle can be adjust from 30° to 140°.
Subject of a Simasv patent, the most important characteristic of the variable angle notching machine AV.226/PA is the automatic adjustment of the slack between the blades from 1 to 6 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses. The machine is equipped with hydraulic blade blockage.

More specifications...