EASY INSTALLATION : Self-calibration, up to 600 m perimeters
RELIABILITY : Detection through analysis of vibrations, sensitivity and number of impacts
INTEGRATED WEB SERVER : Remote maintenance, time-stamped log
G- FENCE 600 and 600Z are shock detection systems for fences, designed for perimeters of 600 m maximum.
G-FENCE 600 and 600Z are made up of detector cables connected to a control unit; they detects vibrations caused by an intrusion made by climbing, cutting or pulling out the fence.
During an intrusion these vibrations are detected by the accelerometer sensor fixed on the fence and transmitted to the control unit which analyses the information and generates an alarm if the activation threshold is reached.
Supplied with 12Vdc, the single management unit can be installed inside or outside the building. Thus, it manages 600m of cable distributed over 2 directions of 300 m maximum. Each 100 m of cable section is equipped with 40 sensors, i.e. 1 sensor per panel and up to 120 sensors per cable direction.
During an intrusion, alarm information is transmitted from the control unit by dry contacts.
G-FENCE 600 and 600Z are suitable for 600 m perimeters maximum, such as industrial sites, which require a high security level and a corresponding budget.
To facilitate installation, the control unit of G-FENCE 600 and 600Z can be used remotely from inside the building, where a 12Vdc power source is available. In fact, the system is designed to tolerate up to 200 m of inert cable between the control unit and the detector cable.