Model 4026 as Frequency to Current Converter
SPECTEC's Model 4026 FTC/FTV converter configured as a Frequency to Current converter is very versatile with field selectable input and output settings. Field technicians can convert the input signal from any passive or active magnetic speed sensor, Hall effect sensor, or zero speed sensor.
In the Frequency to Current converter configuration, the output settings are 4-20mA or 10-50mA. The coarse range is set by jumpers and the fine tuning is set by precision potentiometers. The scale of the output is proportional to the frequency of the input signal. The Model 4026 FTV/FTC converter fits compactly in a Killark "Y3" explosion-proof enclosure.
The PA 20 D/A converter is designed to convert a frequency based signal to a linear voltage or current. Input and output configurations are field selectable to fit most applications. See
Page 2 for available output signals and wiring options.
ZERO and SPAN adjustments make it easy to calibrate to almost any measurement range, with little interaction between the adjustments. The converter will accept frequency input from any mag pickup or digital source.
Freq Range: (dépends on target mass and velocity) -
Hi Setting: 1100 Hz-100 kHz
Lo Setting: 75 Hz-10 kHz
Styles: - PVC puck
Input Sensitivity: -
50 or 100 mVpp
0-Vs TTL (50 V max)
Temp range: -
-40 to 160 F
(-40 to 70 C)
Output: -
4 to 20mA;
10 to 50mA;
Supply Voltage: -
9 Vdc min for 0-5 Vo
11 Vdc min for 0-10 Vo
38 Vdc max
Input Protection: 50 Vac: reversed leads
Dimensions:
2.0" dia.
1.2" height