Shell and tube heat exchanger
150 - 300 psi, max. 300 °F | SX2000 series
Standard Xchange
Straight Tube - Fixed Tubesheet, 1, 2 and 4 pass options, covering areas as large as 136.7 square feet.
Delivery: Typically One (1) week
Materials: Carbon steel shell and tube-sheets with cast-iron bonnets and copper tubes.
Applications: To cool lube oil, fluids or jacket water, and for use where brass is not practical.
Ordering Guidelines:
Select Size:
(a) First two digits indicate shell diameter
(b) Next three digits indicate tube length, in inches
Select Tubeside Passes:
Select the number of passes on tubeside (1, 2 or 4)
Select Baffle Spacing:
"O" (Narrow) baffle spacing used when shellside fluid is viscous and/or heat transfer coefficient is low. (i.e. oil)
"W" (Wide) baffle spacing used when shellside flow is less viscous and/or heat transfer coefficient is high. (i.e. water)
Delivery: Typically One (1) week
Materials: Carbon steel shell and tube-sheets with cast-iron bonnets and copper tubes.
Applications: To cool lube oil, fluids or jacket water, and for use where brass is not practical.
Ordering Guidelines:
Select Size:
(a) First two digits indicate shell diameter
(b) Next three digits indicate tube length, in inches
Select Tubeside Passes:
Select the number of passes on tubeside (1, 2 or 4)
Select Baffle Spacing:
"O" (Narrow) baffle spacing used when shellside fluid is viscous and/or heat transfer coefficient is low. (i.e. oil)
"W" (Wide) baffle spacing used when shellside flow is less viscous and/or heat transfer coefficient is high. (i.e. water)
