Centrifuge for galvanizing applications
45 l | POLAR C4Z Steimel

Based on the POLAR C machine a centrifuge was developed especially for the use in hot galvanizing facilities, which makes it possible to spin off the material after it has been immersed in a zinc bath.
The wet parts in the drum are taken from the zinc bath and put into the machine for centrifugation. The cover of the centrifuge will be pneumaticly closed.
Its characterstic feature in contrast to the standard machine POLAR C is the construction of the centrifugal casing. It is designed conically and is open at the bottom. Thus the spun off zinc can be collected in a ground plate placed below and be returned manually into the zinc bath.
Optionally the machine can be equipped with an electrical lifting device for material charging.
By using a special carrier also rectangular or other customer-specified pans can be used in the centrifuge, instead of round drums.
In order to offer the drum as little surface contact as possible in the carrier the vertical bars taper conically. Thus the coagulating zinc has as little working surface as possible.

Advantages:

Simple operation
Automatic operation
Optimum cleaning conditions
Construction unsusceptible to failure
Little space required