Oil / water separator
max. 7 200 m3/h | STENOSEP series
STENHØJ
Whilst using a drain, oil condensate is separated. So far, so good. But anyone who tries to skimp on the next stage will pay for it, because condensate consist of approximately 97% water - but only 3% contaiminant. So anyone who employs a specialist company for the disposal is throwing away money straight out of the window. What could be more logical than to use a reliable, in-house processing system. Its name: STENOSEP.
A pressure relief chamber separates condensate and expanding air. The condensate then passes a sedimentation compartment - easy to remove thus easy to clean. The next step is the coalescing foam with its additional oil separation effect.
Free floating oil is siphoned off into an oil can. The water is purified in the activated carbon adsorber from the last oil droplets. Pure water leaves the unit ready to be drained.
The range of STENOSEP: 7 sizes - the smallest up to 120 m³/h - the biggest up to 7.200 m³/h to allow perfect match to your compressor room. Best match, best economy for your benefit.
A pressure relief chamber separates condensate and expanding air. The condensate then passes a sedimentation compartment - easy to remove thus easy to clean. The next step is the coalescing foam with its additional oil separation effect.
Free floating oil is siphoned off into an oil can. The water is purified in the activated carbon adsorber from the last oil droplets. Pure water leaves the unit ready to be drained.
The range of STENOSEP: 7 sizes - the smallest up to 120 m³/h - the biggest up to 7.200 m³/h to allow perfect match to your compressor room. Best match, best economy for your benefit.
-
zoom








