Tunnel type curing oven
max. 250 °C
Strong3000
The furnace consists of sandwich panels which have rock wool and yellow as the insulation material between inner side of 1,2mm galvanized steel and outer side of 1,2 mm mild steel sheet. The walls and the ceiling of the oven are 50 mm rock wool and 100 mm yellow insulation total thickness 150 mm and its base is 50 mm thickness. There are adjustable type air blowing mouths and air circulation ducts which homogeneously distribute air at 200 °C. Heat control device is digital type. The heat of the oven is controlled by the command of the thermostat that works by the signal of the thermo-couple, to the burner. Air seal and curtains of the entrance and exit of the oven prevent hot air leakage from the oven. Adjustable type digital thermostats, thermo-couples, consuls carrying the conveyor passing through the oven cable lines to the burner, fans, cable channel and electrical control panel are included in the system.
According to project burn room is assemble to back, side and over of oven and thermo-unit is fitted at the side of the furnace and has the capacity of increasing the furnace temperature up to 250°C. Firing part of the heating unit is produced from SAE316 stainless steel. Unit body from mild steel and heat-insulated. This unit includes an explosion door against explosion, a burner, a circulating fan, an observation cover and electrical installations.
