PCB wire-to-board connector
50 V, 3 A | AMP 2.5DL
TE CONNECTIVITY - Power
With contacts on 2.5mm centerline, both wire-to-wire and wire-to-board connectors are available.
The connectors consist of plug and cap housings for wire termination, double lock plates for plug and cap housings, crimp snap-in contacts, and a PC board-mount post header. A double lock plate is available for both plug and wire-to-wire cap housing to ensure positive loading. It prevents contacts from coming off or being mated halfway. The plate is contained completely within the plug and cap housing. The plug and cap housing can also be used without the double lock plate.
The connector accepts AWG #26-20 wire (e.g. UL 1007, 1061, 1571, etc.) with insulation diameters of up to 1.8mm. The PC board-mount post header is available in two styles: standard profile and high profile.
The high profile type connectors can be used for home appliance applications which require waterproof protection. The mating and locking of the post header with the plug housing will not be hampered even if the board has a resin coating on it.
The locking structure is inner-lock type and has a clean surface.
The solder tail of the loose-piece post header is provided with kinks to secure the connector on PC board until it is soldered.
A radial tape-mounted version of post header is also available and is applicable to radial mounting machines.
