Capper/capping machine
max. 60 p/min. | CP 60
Technoshell Automation Pvt. Lrd.
Description
The Tube Capping Machine, CP-60, is a versatile machine for putting Screw-on and Push fit flip-top caps on the tubes.
The machine has a 12 station servo driven indexing table with stations for the following operations :
*2 stage Tube loading on the mandrel
*Orifice opening (Pip cutting) - (optional)
*2 stage Tag sealing (optional)
*Snap-on capping
*Screw cap tightening with pre-settable controlled torque.
*Tube unloading from the mandrel
In case of push fit caps, the tube and caps are oriented before fixing to the desired position.
The tube feeding is done by a flat belt conveyor with the tube seperator. The cap feeding is done by a vibratory feeder and a linear conveyor.
Elaborate diagnostics features are incorporated which enable quick trouble shooting.
The tube is rejected in case the cap is not tightened to the set torque or flip notch of the cap is not oriented to the desired position.
A unique feature of the machine is the Tube-Test mode. The highlight of this feature is that one tube is loaded on the mandrel, then it moves to all the stations for the various operations and is finally ejected out. This helps in setting the machine with minimum number of tubes.
The machine is distinguished by its high "Performance to Cost" ratio, easy oeration and little maintenance. It is very simple and quick to change from one size to another.
The machine construction is compact yet rigid and is controlled by a fully integrated state-of-the-art logic controller and servo motors from B & R Automations, with a colour touch-screen interface for the operator.
-
video
-
zoom
