Pressure calibration hand pump tecsis

The hand pump with fine adjustment is a pneumatic compression device for a pressure output from 0 to 16 bar and is operable by hand.

The hand pump is especially suitable to check or to calibrate pressure measuring instruments, as for example load cells, pressure sensors and gauges. The pump is portable because of its compact construction and is to serve handily and easily. A fine automatic controller at the pump enables a fine regulation of the pressure output. The pressure pump was developed for a fast and simple pressure calibration.

The hand pump consists of a cylinder, a piston, a pressure release valve, a fine adjustment and the handles. Over the two available internal threads the pump can be attached to the test normal and the test sample, in order to check or calibrate. The handles have to be pressed and released by hand a few times. As result an initial pressure within an area from 0 to 16 bar or -780 to 0 mbar is produced.

Connect test normal and the instrument which is supposed to be calibrated with the pump by using the flexible hose and the supplied connections. During inflating you close the opening valve in clockwise direction. For pressure relief you turn the opening valve against clockwise direction. Before the calibration of the pressure measuring device each connection should be checked for tightness. After the calibration make sure that the pressure is relieved before unscrewing the instrument (otherwise danger of injury exists).

More specifications...