Cast iron Y-strainer
DN 6 - 80, PN 1.6 | YG11
Tianjin IMG Valve Co.Ltd
1.The valve is normally installed at the inlet end of pressure reducing valve,pressure relief valve, and hydraulic control valve or water/gas consumption equipment.
2.To be installed at a diatance from the protected valve equal to 6 to 10 times the diameter of it
3.The piping where the valve is to be installed must be provided with bypass
4.The flow direction of medium must accord with the direction of arrow indicated on the valve
5.Prior to installation,pressure test and inspection must be carried out
6.The flow of selected product must be greater than or equal to that required by the piping
7.The valve should be cleared or cleaned when differential pressure between inlet and outlet is greater than 0.2MPa
8.The valve generally is not installed at the inlet of pump
