Multi-axis stepper and servo-motor motion control card
2 A, 24 V |
Trinamic Motion Control GmbH & Co. KG
Description
3-axis stepper driver 2A/24V (step/dir.)
The TMCM-023 is a simple and very compact step/ direction driver for 3 stepper motors. It allows motor control via step and direction signals and automatically goes into a stand by mode. The drivers are very efficient, so that no heatsink is required if operated in room temperature environment.
The module can be directly controlled by a PLC or by a step/direction controller module like the TMCM-302 or TMCM-342. All drivers operate completely independent.
Please request for different motor current, different microstep resolution or different step/direction control voltage.
Specifications
Electrical data
2.0A RMS coil current (2.8A peak)
7V to 28.5V DC supply voltage
Supported motors
two-phase bipolar motors with about 2A coil current (or sligthly more)
Interface
Step / Direction input (24V signal)
Features
optically isolated inputs for Step and Direction
1/4 or 1/8 step resolution (selected by jumper)
1/16 on request
up to 245kHz microstep frequency
TRINAMIC driver technology: No heatsink required
standby current reduction to 0.5A
jumper for "mixed-decay" mode
diagnostic LEDs signal failure status
-
zoom
