Carbon/sulfur analyzer (CO, CO2, SO2)
EA-CS-8810c U-Therm International (H.K.) Limited

Main technical parameters:

• Measurement range:
o carbon: 0.0001% -10.0000% (can be expanded to 99.9999%)
o Sulfur: 0.0001% -3.5000% (can be expanded to 99.9999%)
• Analysis error: in line with GB/T20123-2006/ISO15350: 2000 standard
• Analysis time :25-60 seconds adjustable (usually 35 seconds or so)
• High-frequency furnace: power ≥ 2.5kVA; frequency: 18MHz
• Electronic Balance: non-quantitative sample weighing;
• Reading accuracy: 0.0001g
• Working environment: room temperature :10-30 ℃;
• Relative humidity: less than 90%
• Power supply: requires a good grounding connection
• voltage: AC220V ± 5%; frequency: 50Hz ± 2%
• Oxygen: purity ≥ 99.5%, input pressure: 0.18MPa ± 5%

Configurations and their description:

1. High-frequency Furnace：High-frequency circuit: high-power high-frequency circuit and ceramic vacuum capacitor that can burn without samples to reduce the load on high-frequency combustion system and extend its service life.
Controlling circuit: automatically-detect electromagnetic valve, lift cylinder, and high -frequency condition.
Safety system: automatically trigger alarm of exceeding time and over-current and ensure high-frequency furnace work normally
Gas circuit structure: imported gas circuit system (electromagnetic valve, pipe fitting, lift cylinder), automatic leak detection.
Dedusting system: automatic cleaning device and patented ash removal system, internal pressure seal for dedusting with good sealing and easy replacement
Furnace structure: low-pressure heating, constant-temperature, to improve the conversion rate of sulfur and ensure the stability of sulfur analysis result.