Compact robot controller TS-S2

Robot positioner TS-S2 TS-S2 is positioned type controller that only performs point trace. Simple operation only by specifying point number data Operability and controllability are the same as the conventional model "TS-S". TS-S2 is positioned type controller that only performs point trace. No program is needed. Operation is simple. After setting point data, specify the point number and enter a START signal from host controller such as a PLC. Positioning or pushing operation then begins. Feature Available for all TRANSERVO series models. Detailed data can be set for each point Settings such as acceleration, deceleration, zone output range, and position margin zone can be set for each point. Different operations can be easily specified by combining these settings with the above operation patterns. Maximum acceleration auto setting Acceleration is a critical parameter that determines how long the robot can continue operating (or service life). In worst cases, setting the acceleration too high may cause the robot to breakdown after a short time. On the TS series, the maximum acceleration is finely set by taking into account the service life span of the motor output and the guide for each robot model and payload. This eliminates any worry about setting the acceleration too high by mistake.