DC motor / stepper / 24V / 12V
ZD2N2318 Zikodrive Motor Controllers

Characteristics

  • AC/DC:

    DC

  • Type:

    stepper

  • Voltage :

    24V, 12V, 18V, 28V, 22 V, 20V, 15V, 48V, 36V

  • Other characteristics:

    integrated-drive, with electronic control, closed-loop, integrated speed control 0-10V, with built-in electronics, programmable, NEMA 23, direct-drive, variable-speed, motion control, with speed controller, compact, with integrated driver and coder, with integrated controller, with integrated inverter, for medical equipment, solar, for the automotive industry, for railway applications, industrial, for medical applications, for household appliances, for air compressors, for water treatment applications, for agribusiness, centrifuge, for Venetian blinds, for automatic doors, for massage equipment, for the chemical industry, for marine applications, for robotics, for water pumps, for the mining industry, for pumps, retrofitting, high-power, low-noise, high-resolution, precision, high-precision

  • Torque:

    Min.: 0 Nm (0 ft.lb)

    Max.: 0.6 Nm (0.44 ft.lb)

  • Power:

    Min.: 0 W (0 hp)

    Max.: 70 W (0.09 hp)

  • Rotational speed:

    Max.: 1000 rpm (6283.19 rad.min-1)

Description

NEMA 23 stepper motor with Zikodrive 2 (ZD2) programmable intelligent stepper motor controller. Up to 128 microstep, up to 2A, up to 35v, up to 0.6 Nm torque.

Motor Specifications

Dimensions 57mm x 57mm
Step Angle 1.8 degree
Step Angle Accuracy 5% (full step, no load)
Resistance Accuracy 10% (@20 degrees C)
Inductance Accuracy 20% (@1khz)
Temperature Rise 80 degree max (at rated current)
Ambient temperature -20 degrees C to 50 degrees C
Insulation Resistance 100MΩ Min. ,500VDC
Dielectric Strength 500VAC for one minute
Shaft length 20.6mm (15mm D cut)
Shaft Diameter 6.35mm
Shaft Radial Play 0.02 Max (450g load)
Shaft Axial Play 0.08 Max (450g load)
Max Radial Force 28N (20mm from flange)
Max Axial Force 10N
Rated Voltage 4.95V
Rated Current/Phase 0.88A
Resistance/Phase 2.75 Ω
Inductance/Phase 17mH
Holding Torque (Nm) 0.6
Leads 4
Rotor Inertia 120g-cm2
Weight 500g
Length 42mm


Controller Specifications

•Up to 35v.
•Up to 2A.
•Up to 128 microsteps.
•Modular design, connects to many sister boards that can provide options such as 4-20mA, 0-10Vdc,, LCD displays, OEM programmer, RS232 and Optically Isolated inputs.
•Speed control via 0-5Vdc analogue voltage or external pulses.
•Selectable Acceleration settings.
•Selectable Acceleration current.
•Selectable step resolutions of Full step, Half Step, Quarter Step of 1/16 Step.
•Over temperature protections and stall detection.
•Microprocessor controlled enabling exceptional positional accuracy.

{{requestButtons}}
Favorites

Other Zikodrive Motor Controllers products