DC motor / stepper / 24V / 12V
ZD10LCDN2318 Zikodrive Motor Controllers


  • AC/DC:


  • Type:


  • Voltage :

    24V, 12V, 18V, 36V, 28V, 32V, 22 V, 20 V, 30 V, 48V

  • Other characteristics:

    integrated-drive, NEMA 23, compact, with electronic control, integrated speed control 0-10 V, with integrated driver and coder, motion control, direct-drive, variable-speed, with speed controller, with integrated controller, programmable, with built-in electronics, closed-loop, with integrated inverter, for medical equipment, for the automotive industry, blower, mill duty, vehicle, industrial, for medical applications, for air compressors, for water treatment applications, for agribusiness, centrifuge, for Venetian blinds, for automatic doors, for massage equipment, for the chemical industry, for robotics, for water pumps, for the mining industry, for automatic distributors, for pumps, low-noise, high-resolution, precision, modular, for conveyors

  • Torque:

    Min.: 0 Nm (0 ft.lb)

    Max.: 2.4 Nm (1.77 ft.lb)

  • Power:

    Min.: 0 W (0 hp)

    Max.: 350 W (0.47 hp)

  • Rotational speed:

    Min.: 0 rpm (0 rad.min-1)

    Max.: 1000 rpm (6283.19 rad.min-1)


NEMA 23 stepper motor with integrated ZD10LCD programmable motor controller. Up to 35v, up to 10A, up to 2.4Nm. Built in LCD screen with 4 programmable buttons.

Motor Specification

Dimensions 57mm x 57mm
Step Angle 1.8 degree
Step Angle Accuracy 5% (full step, no load)
Resistance Accuracy 10% (@20 degrees C)
Inductance Accuracy 20% (@1khz)
Temperature Rise 80 degree max (at rated current)
Ambient temperature -20 degrees C to 50 degrees C
Insulation Resistance 100MΩ Min. ,500VDC
Dielectric Strength 500VAC for one minute
Shaft length 20.6mm (15mm D cut)
Shaft Diameter 8mm
Shaft Radial Play 0.02 Max (450g load)
Shaft Axial Play 0.08 Max (450g load)
Max Radial Force 28N (20mm from flange)
Max Axial Force 10N
Rated Voltage 4.95V
Rated Current/Phase 1.8A
Resistance/Phase 2.75 Ω
Inductance/Phase 17mH
Holding Torque (Nm) 2.4
Leads 4
Rotor Inertia 680g-cm2
Weight 1250g
Length 104mm

Controller Specification

Voltage Range 11-35Vdc
Current 0-10A adjustable
Microstep Resolution Up to 128 microsteps
Pulse Input Optional
0-5V external input 10bit Available
Onboard speed control Potentiometer Not fitted due to inbuilt buttons
Over current protection Enabled
Over heat protection Enabled
Reverse Polarity Protection Yes
Control Logic Inputs -0.3 to 6Vdc
Max RPM Possible from 0-3000RPM depending on motor used
Operating ambient temperature 0~+50˚C
Conservation temperature - 20~+70˚C
Operating ambient humidity 35~85% RH (no condensation)
Conservation humidity 10~90% RH (no condensation)
Type of driver Chopper Mode and PWM mode
Encoder Feedback Yes
Closed Loop Feedback Yes
Onboard intelligence parameters or programmes can be stored and triggered.
LCD Screen 8x2 LCD
Buttons 4 buttons


Other Zikodrive Motor Controllers products