Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW
ZPD external gear dosing pump Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific to ...
Beinlich Pumpen
Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C
ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...
Beinlich Pumpen
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...
Beinlich Pumpen
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants
Zenit
Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW
Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks
Zenit
Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW
Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications
Zenit
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also a ...
Dropsa spa
Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C
... on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with ...
Dropsa spa
Pressure: 3 bar
Two-outlet piston pump with pin valves for setting the flow. Placed in a central position with respect to the two out-let lines, it allows system extension. It may operate on a single line while the other line is plugged, ...
Dropsa spa
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0.0006 l/min - 5 l/min
Input diameter: 1 mm - 8 mm
Length: 191 mm
... product or the pump itself is prevented. However, most instruments are difficult to program, are oversized and bulky. DOSE IT has been especially designed for laboratories looking for an easy-to-use, compact ...
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm
The Hi-Force AHP series of air driven hydrostatic pressure testing pumps offer a choice of eight models with output pressure capacities ranging from 6 bar (87 psi) to 2931 bar (42500 psi). All models are suitable for ...
Hi-Force Hydraulic Tools
Flow: 30, 50 l/min
Pressure: 1.5 bar
Power: 300, 310, 80 W
... minutes. BP 3000 diesel transfer pump is equipped with a vane motor with a sintered rotor and acetal resin vanes that ensures greater power and precision in the dispensing phase. The By-Pass valve integrated in the pump ...
PIUSI
Pressure: 100, 50 bar
... over-hard water.Easy to use: for pumping, testing and bleeding with a single button.Small size for the tightest of locations.3 pump models for your seal tests (for leak testing on water installations- plumbing, individual ...
Flow: 0.24 l/min - 8.2 l/min
Pressure: 15.5 bar - 517 bar
Power: 0.33 ch
Key Features • Choice of 6 models, 9 ratios, 28 possible combinations • Flows to 2 gpm (7.5 l/min) • Choice of wetted materials • Single air head • Drive pressure 25 to 125 psi (1.8 to 9 bar) • Pressures to 25000 psi (1724 bar) • ...
Haskel
Flow: 0.6 l/min - 6.55 l/min
Pressure: 48 bar - 517 bar
Power: 0.75 ch
Key Features • One model available in 9 ratios • Output pressures to 15000 psi (1034 bar) • Flows to 1.5 gpm (5.7 l/min) • Choice of wetted materials • Single air head • Drive pressure 3 psi to 100 psi (.2 to 7 bar)
Haskel
Flow: 0.15 l/min - 13.1 l/min
Pressure: 28 bar - 1,103 bar
Power: 2 ch
... pressure 3 to 100 psi (.2 to 7 bar) When using high pressure ratio pumps the reliability of the XH models (-452 through -1373) will be improved with an air driven supercharge pump, not only to simplify ...
Haskel
Flow: 5,000 l/h - 14,000 l/h
... directly into the bowl. Driving the centrifuge directly from the motor minimizes energy lost in the process, enables more compact designs and reduces the maintenance that gear-or belt-driven systems might require otherwise.
Waukesha Cherry-Burrell
Flow: 30 us gal/min
Pressure: 10 bar
Fluid temperature: 149 °C
Mixers And Blenders / Shear Pumps Designed for "on-line" continuous shearing and mixing action. FEATURES A choice of modularly interchangeable stators and rotors makes it versatile for processing a wide variety ...
Waukesha Cherry-Burrell
Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...
Waukesha Cherry-Burrell
Pressure: 0.06 MPa
Weight: 500 g
... be allocated. 06 End position optical detection End position optical detection. The optical sensor detects whether the pump is at the initial point of aspirate.
Keyto Fluid Technology
Pressure: 0.06 MPa
Weight: 500 g
... resistance of the pipette pump components: (1) Pump head material: aluminium alloy; (2) Piston material: stainless steel. 06 End position optical detection End position optical detection. ...
Keyto Fluid Technology
Fluid temperature: 15 °C - 40 °C
SADP (Superb Air Displacement Pipette) is a pipetting module developed by Keyto. Based on pneumatic aspiration and dispensing technology with disposable tips for pipetting, which supports automatic aspiration and dispense in the range ...
Keyto Fluid Technology
Application The TP pump is a pneumatically operated, single acting, piston pump. Discharge capacity is adjustable from 0.57cc to 1.1 cc per stroke. A high pressure ratio of 50:1, offers high outlet ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...
Delimon
Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C
VISCOSITY RANGE - 20-1500 CST PHASE - 1 PHASE HZ - 50/60 MOTOR ELECTRICAL CONNECTOR - CABLE GLAND INTEGRATED CONTROLS - TERM STRIP + MOMENTARY SWITCH LEVEL MONITORING - LLS PRESSURE GAUGE - INCLUDED RESERVOIR - 3L OUTLET THREAD ...
Delimon
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Emile Egger & Cie SA
Flow: 180 l/s
Pressure: 16 bar
Head: 100 m
Turo® Vortex TA impeller for pumping of raw municipal sewage with a high content of fibers without clogging. Fully recessed impeller for maximal free passage. Applications - Raw sewage - Municipal and industrial wastewater - Sludge ...
Emile Egger & Cie SA
Flow: 1,500 l/s
Pressure: 30 bar
Head: 150 m
The high-performance pump for homogeneous liquids containing high concentrations of solids and high gas contents. Different impellers for large and small particle sizes. Applications - Demanding fluids ...
Emile Egger & Cie SA
Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C
... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...
MOUVEX
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series pumps ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Albin Pump
Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm
... fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini pump ...
Flow: 50 l/min
Pressure: 70 bar - 5,000 bar
The P-Series of air-driven pumps reduce maintenance downtime and provide reliability for pumping various liquids with pressure up to 72,500 psi (5,000 bars). The pumps operate with an automatic reciprocating ...
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...
Johnson Pump
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Compact, ...
Johnson Pump
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available ...
Johnson Pump
Flow: 0 l/min - 2.1 l/min
Pressure: 0 mbar - 400 mbar
Fluid temperature: -25 °C - 55 °C
... range of -25 to 55 °C, with this unique set of features Disc Pump enables advances across a broad spectrum of Gas Sampling, Detection, Monitoring and Analysis applications. All of our pump designs ...
Flow: 0 l/min - 1.65 l/min
Pressure: 0 mbar - 300 mbar
Fluid temperature: 5 °C - 40 °C
... Micropump The BL Series Disc Pump, low cost micropump strikes a balance between performance and cost. Like all Disc Pumps, the Disc Pump combines silent operation, pulsation-free flow, ...
Flow: 0 l/min - 1.2 l/min
Pressure: 270 mbar
Fluid temperature: -25 °C - 40 °C
... Series Disc Pump – long lifetime micropump has been optimised for long service life, delivering in excess of 5,000 hours continuous operation under the most demanding conditions. Over 5,000 hours, cycling 20,000 times ...
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps are designed ...
DESMI Pumping Technology A/S
Flow: 13 l/min - 21.9 l/min
Pressure: 5, 10, 15 bar
Power: 0.1 kW - 0.61 kW
2 diaphragms in NBR (Desmopan® or Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: pressure accumulator. On request: safety valve and PTO protection.
COMET Spa
Flow: 11 l/min - 13 l/min
Pressure: 0 bar - 150 bar
Power: 3.7, 3.1 kW
Reciprocating plunger pump, 3 solid ceramic plungers, nickel brass plated head, aluminum die cast crankcase with cataphoresis coating, double sealing system, hardened steel crankshaft, oversize roller/ball bearings. The ...
UDOR S.p.A.
Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW
The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...
UDOR S.p.A.
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 0.38 m³/h
Power: 10 W
Fluid temperature: 80 °C
Ideal for the filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C
... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...
Siebec
Flow: 80, 100 m³/h
Pressure: 200, 350 bar
Head: 28 m
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 75, 250 m³/h
Pressure: 350, 300 bar
Head: 47 m
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Flow: 450, 1,000 m³/h
Pressure: 300, 350 bar
Head: 63 m
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% ...
DRAGFLOW
Please specify:
Help us improve:
remaining