- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Magnetic piston cylinder >
- AIGNEP
AIGNEP magnetic piston cylinders
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Stroke : 15 mm - 500 mm
Pressure: max 10.0 bar
Force: 10 N - 110 N
... °C – +70°C. The range starts from 16 bore up to 63 bore, double acting version standard or with through rod, magnetic or not magnetic piston available. The end caps are crimped onto ...
PNEUMAX
Stroke : 5 mm - 80 mm
Ambient temperature: -30 °C - 120 °C
This series of cylinders is available in two versions with different threaded fixing holes. The first one includes cylinders from Ø 32 to Ø 100 called “ISO” with fixing holes same as cylinders ...
PNEUMAX
Stroke : 20 µm - 100,000 µm
Ambient temperature: -5 °C - 150 °C
... _. A complete range of clamps makes them easy to install under any conditions. It is interesting to note that as these cylinders (from Ø 32 to Ø 100) have anchoring holes with the same lead and thread as those of series ...
PNEUMAX
Stroke : 0 mm - 1,000 mm
Force: 0 N - 253 N
Speed: 0.2 m/s - 2.5 m/s
... of corrosion-resistant materials and initial lubrication with our food-grade grease makes the cylinders suitable for food industry applications. The cylinders are particularly suitable for lighter duties ...
Stroke : 5 mm - 100 mm
Force: 51 N - 4,702 N
... from 5 mm to 100 mm. The cylinder is supplied in a choice of magnetic or non-magnetic function, the non-magnetic version offers very short axial dimensions. For optimum ...
Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s
... Series 40K cylinders comply with the ISO 15552 standard and can be assembled with the entire range of standard accessories. A permanent magnet on the piston of these cylinders is able ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s
... the assembled cylinder. This cylinder series is normally equipped with adjustable endstroke cushioning by means of a screw positioned on the end-block. Materials - AL end blocks and piston ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 0.1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s
... Series 61 cylinders comply with the ISO 15552 standards and can be assembled with the entire range of standard accessories. A permanent magnet, mounted on the piston in these cylinders, enables ...
CAMOZZI AUTOMATION
Stroke : 1 mm - 500 mm
Bore: 8 mm - 25 mm
Pressure: 10 bar
Mini-cylinders to ISO 6432 with a chamfered stainless steel barrel. Can be used with different types of sensors. Available in various versions with a wide range of accessories: • with or without magnet • with ...
Stroke : 1 mm - 500 mm
Bore: 16, 20, 25 mm
Pressure: 10 bar
Minicylinders manufactured according to the ISO 6432 regulation having high resistance technopolymer heads and anodized aluminium liner.Available in various versions with a wide range of accessories: • with or without magnet • gaskets ...
Stroke : 1 mm - 2,800 mm
Pressure: 0.6 bar - 12 bar
Force: 483 N - 7,363 N
... for customized applications • Comprehensive range of mounting accessories for just about every type of installation • Magnetic piston for position sensing • Variants recommended for production facilities ...
FESTO
Stroke : 1 mm - 500 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 1,870 N
... end-position cushioning saves time during commissioning and adapts optimally to load and speed changes • Piston rod with internal or external thread • Magnetic piston for position sensing
FESTO
Stroke : 10 mm - 200 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 294.5 N
... standards-based cylinder DSNU • Quick and easy installation, even in tight spaces • Light weight • Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed ...
FESTO
Stroke : 50 mm
Pressure: 1 bar - 10 bar
Force: 50 N
... double crimped end cap design Buffer or adjustable cushioning Nose mounting nut and piston rod locknut as standard Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 16 mm
Norgren
Stroke : 25 mm
Pressure: 1 bar - 10 bar
Force: 294 N
... double crimped end cap design Buffer or adjustable cushioning Nose mounting nut and piston rod locknut as standard Medium: - Compressed Air Port size: - G1/8 Cylinder diameter: - 25 mm
Norgren
Stroke : 25 mm
Pressure: 1 bar - 10 bar
Force: 120 N
... strength, double crimped end cap design Buffer or adjustable cushioning Nose mounting nut and piston rod locknut as standard Port size: - M5 Cylinder diameter: - 16 mm
Norgren
Stroke : 25 mm - 150 mm
Pressure: 3 bar - 8 bar
Rod diameter: 12, 16, 20, 25 mm
Pneumatic cylinder double acting Guided by 2 rods on ball bushings or bronze bearings Elastic damping at end of stroke Magnetic piston and T-groove for sensor Options : Back stop ...
Stroke : 25, 40, 50, 10 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
... Mini cylinder shape body 13 Anodised aluminium Back cover Fluids Filtered and lubricated compressed air as well as non lubricated air. Functioning Single acting magnetic or non-magnetic. Double ...
AIGNEP
Stroke : 10 mm - 320 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
... Mini cylinder shape body 13 Anodised aluminium Back cover Fluids Filtered and lubricated compressed air as well as non lubricated air. Functioning Single acting magnetic or non-magnetic. Double ...
AIGNEP
Stroke : 10 mm - 320 mm
Pressure: 1 bar - 10 bar
Rod diameter: 16, 20, 25 mm
... Mini cylinder shape body 13 Anodised aluminium Back cover Fluids Filtered and lubricated compressed air as well as non lubricated air. Functioning Single acting magnetic or non-magnetic. Double ...
AIGNEP
Stroke : 0 mm - 1,000 mm
Pressure: 1 bar - 20 bar
Rod diameter: 32 mm - 125 mm
... point must be at least 10°C below lowest occurring ambient temperature. Double acting pneumatic cylinder with adjustable cushions and magnetic piston for proximity sensors
AIRTEC Pneumatic
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 10 mm - 320 mm
Force: 30 N - 295 N
... possible - Rod and piston seals with the highest efficiency and longest durability - Metal piston to resist to extreme stresses - Bronze guide bushing to reduce the axial clearance when rod is fully ...
Airwork Pneumatic Equipment
Stroke : 25 mm - 3,000 mm
Cylinders series "XL" comply with ISO 15552 standard, being in this way completely interchangeable with the former cylinders to ISO 6431 /VDMA 24562 standards. These cylinders are supplied ...
Waircom
... strokes. Ultra-compact, lightweight and space-saving. Sensor slots on the RCI sides for flush mounting of proximity switches. Magnetic as standard.
Stroke : 200 mm
Bore: 10, 16, 20, 25 mm
Pressure: 0.2 MPa - 0.7 MPa
... feature 1.This magnotic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets The mobile carriage is also equipped with magnets to ...
Stroke : 5 mm - 80 mm
CU series short stroke cylinders. According to project U.N.I.T.O.P. - RUP/7 Bores from 16 to 100mm, with magnetic piston single and double acting with end stroke elastic cushions.
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
CK Series (Norma ISO 6432) Miniature cylinders single and double acting Available in standard and magnetic versions.Pneumatic end of stroke cushions for the bores 20 and 25.
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
CT Series Miniature cylinders single and double acting with round profile end cap. Available in standard and magnetic versions. Available with radial rear mounting (type CT1) or in line (type CT2)
Bonesi Pneumatik s.r.l.
Stroke : 10 mm - 300 mm
Bore Ø: 8, 10, 12, 16, 20, 25 mm Stroke: 10 to 300 mm • This Series complies with ISO 6432-CETOP RP 52P • With permanent magnet • Adjustable stroke end buffer (Models Ø20 and Ø25
Bore: 200, 250, 320, 125, 160 mm
ISO Large Bore Cylinder • Conforming to ISO 15552 Standard Specifications. • Available in 125, 160, 200, 250 & 320 mm bore dia. • Magnetic cylinders for reed switch application ...
Bore: 125, 160, 200, 250, 320 mm
Knife Gate Cylinders • Conforming to ISO 15552 Standard Specifications. • Available in 125, 160, 200, 250 & 320 mm bore dia. • Magnetic cylinders for reed switch application available. • ...
Stroke : 1.6 mm - 101.6 mm
Bore: 0.5 in - 4 in
Pressure: 500, 250 psi
... wide range of options including a magnetic piston for cylinder position sensing or a non-rotating unit with internal pins to ensure proper rod orientation. Custom designs are also available. ...
FABCO-AIR
Stroke : 25 mm - 300 mm
Bore: 125, 160, 200, 250 mm
Pressure: 0.5 bar - 12 bar
The new compact cylinders DAL e DALM series LARGE are available with diameter 125-160-200-250 to complete the range of already existing FARBO short stroke cylinders. Ten standard strokes up to 300 mm. ...
Farbo
Stroke : 20 mm - 50 mm
Bore: 20 mm - 50 mm
Pressure: 160 bar
... version, with magnetic sensors. Their body is provided with holes for sensors. All CC short-stroke cylinders are equipped with a magnetic piston with two PTFE anti-friction ...
Stroke : 25 mm - 2,500 mm
Force: 295 N - 18,840 N
... aluminium TIE RODS Ø32-100 AISI 303 stainless steel Ø125 chromium-coated steel PISTON Aluminium SEALS Polyurethane – NBR GUIDE BUSH Sintered bronze PISTON ROD Chromium-coated steel MAX ...
Cy.Pag. S.p.A.
Stroke : 1 mm - 3,000 mm
Speed: 1 m/s
... the cylinders mountings possibility has been enlarged. The particular choise of specific materials gives these cylinders the possibility to work also without lubricant (dry air). All cylinders ...
Force: 0.93 kN - 461.8 kN
Speed: 0 m/s - 0.3 m/s
... is 10 bar - Universal work position for any application. - Without external oil reclaiming. - Fast approach cylinder with magnetic piston as standard. - Test sheet & instructions ...
Stroke : 10 mm - 200 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
The pneumatic cylinders feature magnetic pistons and are available in the following versions: double-acting with fixed end position damping, double-acting with adjustable end position ...
... 21287 pneumatic compact cylinder double-acting with magnetic piston Description Material: Cylinder tube: aluminium. End cover: die-cast aluminium. Piston ...
... round cylinder double-acting with magnetic piston Description Material: Cylinder tube: stainless steel 1.4301. Endcap: aluminium. Piston rod: stainless ...
Stroke : 5 mm - 100 mm
Bore: 20 mm
Pressure: 4 bar - 10 bar
... SH..., SO..., and SR...). Version "V" has an integrated vacuum ejector. For supervisory purposes the position of the magnet piston can be requested via the HZ20-RS reed switches. These can each be fixed in the case groove. Function: ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining