- Hydraulics - Pneumatics >
- Pump >
- Fuel oil pump >
- ARO
ARO fuel oil pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, ...
Lutz Pumpen GmbH
Flow: 0 l/min - 40 l/min
Pressure: 6 bar
Power: 500 W
... joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. ...
Lutz Pumpen GmbH
Flow: 0 l/min - 87 l/min
Head: 0 m - 19 m
Power: 500 W
The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. • Media examples: Diesel, heating oil, ...
Lutz Pumpen GmbH
Pressure: 0.8 MPa - 21 MPa
Length: 323, 290 mm
Width: 168, 198 mm
Dual pumps that integrate a V series piston pump and a vane pump in one body.
Daikin PMC
Flow: 80 l/min
Head: 12 m
Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer ...
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, and hastelloy-C ...
ARO, Ingersoll Rand
Flow: 0 l/min - 265 l/min
Pressure: 1 bar - 8 bar
2” metallic air operated diaphragm pump The ARO metallic 2” PX20X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...
ARO, Ingersoll Rand
Flow: 0 l/min - 1,250 l/min
Pressure: 1 bar - 8 bar
3” metallic air operated diaphragm pump The ARO metallic 3” PX30X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...
ARO, Ingersoll Rand
Flow: 0 m³/h - 7 m³/h
Head: 8.5 m
Power: 0.25, 0.37 kW
Magnetic drive centrifugal pumps Intel connections: 1" F Outlet connections:3/4” M Max. Delivery head:8,5 mts Max Viscosity:150 CPS Impeller:closed
Input diameter: 19 mm
Output diameter: 19 mm
... Fire brigade hand pump ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III: Diesel, heating oil, fuel, petroleum, anti-freezing ...
Flow: 32 l/min
Pressure: 1.2, 0.8 bar
Weight: 5.43 kg
... EXGO! stands out for its intrinsic features: * small sizes; * remote control; *continuous duty cycle; * built-in bypass valve; * ATEX certification. Compact and sturdy, EXGO! is an ATEX vane ...
Flow: 20, 35, 70, 130 l/min
Pressure: 0 bar - 7 bar
Weight: 6.9, 2.5, 3.6 kg
... along with a compact build and feathered flap valves that cut down noise enable it to be the perfect machine for OEMs - original equipment manufacturers. Notwithstanding that, anyone using the normal AODD pumps ...
Flow: 54 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m
... o - Stainless Steel diaphragm-shaft. • - Undersized pump to fit in any application or reduced space. • - Lateral fluid inlet and outlet ports avoid leaking directly onto the pump. • - Compact ...
Flow: 10, 11, 13 l/min
Pressure: 0 bar - 15 bar
Power: 780, 600 W
Internal gear electric pumps for lubricants.motor depending on model, IP-55 protection and on/off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor with mounting feet, the pump ...
Flow: 0 us gal/min - 45 us gal/min
Pressure: 8.6 bar
Head: 70 m
... valves. This pump is designed to be driven by compressed air or nitrogen. The U1F is commonly used to transfer the following products: Fuels and hydrocarbons Gasoline Diesel ...
Flow: 0 m³/h - 3.5 m³/h
Pressure: 0 bar - 5 bar
Fluid temperature: 0 °C - 70 °C
... required, these self priming pumps can achieve suction lifts up to 8 metres on water. Mono’s CB/SB, G, M and CP Range pumps provide an economic answer to many pumping duties. Simple design and construction ...
Flow: 0 l/min - 52 l/min
Head: 0 m - 16 m
Power: 0.14 kW - 0.63 kW
... based on standard specification EN 12157. Applications Types of fluid - - coolants cooling/cutting oils fuel oil water (with anticorrosive additive) - Kinematic viscosity ...
Flow: 0 l/min - 45 l/min
Head: 0 m - 45 m
Power: 0.25 kW - 1.06 kW
... coolants fuel oil - Kinematic viscosity - - ...12 mm²/s (12 cSt) - Pumping temperature - - 0...80° C - Suction height - - 2 m without foot-located valve 6 m with foot-located valve - Construction Pump ...
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
Flow: 1.2 l/min - 300 l/min
Pressure: 0 bar - 8 bar
Fluid temperature: -10 °C - 60 °C
Pumps series BT and BTH are low speed gear pumps for transfering medium and high viscosity fluids, provided they have certain minimum amount of lubricating property, do not contain any solids and are ...
Flow: 705 m³/h
... simplex (direct acting)… Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps direct ...
Flow: 760 m³/h
... duplex (direct acting) Product Category: RECIPROCATING PUMPS Reciprocating power pumps are designed with exceptional versatility to efficiently..... The ClydeUnion Pumps direct ...
Flow: 0.08 l/min - 3.5 l/min
Pressure: 0 bar - 7 bar
Head: 1 m - 2 m
MG200 Series / Magnetic Drive Micro Gear Pump (DC brushless motor, outside controller) 1. Using magnetic coupling drive without leakage, 316 L stainless steel shell, PEEK materials gear, PTFE sealing ...
Flow: 1 l/h - 210 l/h
Pressure: 7 bar - 10 bar
Power: 70 W
MG200 Series / Magnetic Drive Micro Gear Pump (DC brush motor) 1. Magnetic gear pumps, using magnetic coupling drive without leakage,316 stainless steel shell, PEEK material gear,PTFE ...
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 40 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Eurial
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Eurial
Flow: 2.8 m³/h
Pressure: 3.5 bar
Power: 0.37 kW - 1.5 kW
Offset rotor pumps with bronze pump body Descriptive Technical data: Pump body: bronze Max. viscosity: 500 cPo Suction capacity: 3 metres Orifice Ø: 1’’ ...
Pompes Japy
Flow: 2.2 m³/h
Head: 0 m - 20 m
Power: 0.37 kW
Electric diesel pump with turbine at 2800 rpm Descriptive Technical data: Built-in bypass on the pump with single-phase motor Current: 2.5 Orifice Ø: 1" ...
Pompes Japy
Flow: 3.6 m³/h
Head: 0 m - 60 m
Power: 0.75 kW
... advantages: Self-priming open turbine monoblock pump Characteristics More Information Fluid - Diesel Technology - Turbine ATEX - No Pump - Bare Orifice - 1" Materials ...
Pompes Japy
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type ...
Elettromeccanica Delta S.p.A.
Flow: 0.6 m³/h
Head: 20 m - 50 m
Power: 0.25 kW - 0.75 kW
Construction - Close-coupled gear pumps (rotary pumps). - Pump casing with suction and delivery connections with the same diameter and on the same axis (in-line execution). Applications -For ...
Flow: 760 m³/h
Fluid temperature: 454 °F
... API 674. Applications Abrasive liquids & slurries Liquid propane & butane Ammonia Alcohol, naptha, gasoline, fuel oil, lube oil Tars and asphalts Boiler feed Hydrostatic test Product ...
Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
Flow: 1.9 l/min - 49.2 l/min
Pressure: 20.7, 34.4 bar
Fluid temperature: 0 °C - 246 °C
Lubrication, Fluid Transfer, Filtration, Fuel Oil, Oil Burner Feed, Compressor, Refrigerators, Gear Boxes, Transmissions, Engines
Tuthill
Flow: 2,000 m³/h - 5,000 m³/h
Pressure: 16 bar - 150 bar
... fluids.In the oil & gas industry it is used as pipeline start-up, unloading, tank cleaning, stripping, transfer, booster, circulating, blending and export pump for all kinds of fluids, e.g. multiphase ...
Leistritz Pumpen GmbH
Flow: 10 l/min - 1,200 l/min
Pressure: 0 bar - 16 bar
Magnetic coupled. Sealless. Leak-free pumps. Optimal MGO and heavy fuel oil applications in the marine industry. IMO OptiLine magnetic coupled pumps, also called magnetic ...
IMO AB
Flow: 3.4 m³/h - 114 m³/h
Pressure: 14 bar
Fluid temperature: -51 °C - 230 °C
The 4224B Series™ internal gear pump is the ideal solution for heavy fuel oil, waxes, rubber solution, and more due to its ability to heat rapidly and efficiently using steam or hot oil. Features ...
Viking Pump
Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C
The HPP 200 is a very compact high-pressure pump that is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of the pump is designed for a continuous ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining