BOLZONI stationary lift tables
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Capacity: 1,000, 500, 600 kg
Robotic vertical lifting systems High capacity, compact design, simple service and low maintenance cost – the FlexLifter can replace custom made machinery with a modulated, flexible, and standardize product! The ...
Capacity: 2,000, 1,000, 500 kg
Lifting height: 800 mm
... Hymo MXE can be loaded by hand pallet truck. The low closed height means the MXE-table can be sited directly on the floor - no pit is needed. it can quickly and easily be moved to a new location when ...
HYMO
Capacity: 3,000 kg - 10,000 kg
Lowered height: 300, 400, 600 mm
Lifting height: 1,300 mm - 8,000 mm
Hymo DX Lift Tables represent the high-capacity end of the Hymo range offering lifting capacities from 3 to 10 tons. In tandem format - type DXT - two synchronised tables fixed ...
HYMO
Capacity: 1,000 kg - 5,500 kg
Lowered height: 240 mm - 390 mm
Lifting height: 800 mm - 1,650 mm
Hymo BX Lift Tables provide the basis of many solutions to industrial lifting problems. They are produced in a range of lift heights and with load capacities from 1 to 3 tons. In tandem ...
HYMO
Capacity: 1,800 kg
Lifting height: 125 cm
... efficient lifting tables / lifting systems are required, which allow robots to work at optimal levels. The lifting table pictured was built with two ...
The Kopron loading platforms are perfect to carry goods, including very heavy weights, to the loading level where a lift-up flap does not exist or cannot be created, or to transfer vehicles and materials from the service ...
Capacity: 10,000 kg
Lifting height: 1,600 mm - 2,000 mm
... Dual-Dok® system provides both dock leveler and dock lift functions at a single dock position. The Dual-Dok lift/leveler saves valuable space by eliminating the part-time position of a scissors lift ...
... hand trucks. The Rite-Hite LRL is an easy to operate mix of hydraulic loading dock scissor lift operation and manual lift lip positioning. This dock lift is ideal for facilities such ...
Capacity: 1,300 kg
Lifting height: 1,140 mm
Tray length: 1,600 mm
... standards. The 2 hydraulic lifting tables have a capacity of 1300 kg each and an elevation of 1140 mm from the ground. This turntable allows easy access to the parts. THE CHARACTERISTICS ...
Capacity: 1,000 kg
Lifting height: 800 mm
Tray length: 1,350 mm
This 1000 kg lifting table, reference TE100-135-080-4292, is quite classical. The lifting is done by hydraulic energy by a simple support on the control post. This 1000 kg lifting table ...
Lifting height: 384 mm
The Tilting Lift Table (TLT) allows the operator to lift and tilt the pallet for easy handling. Ergonomic access to the pallet container. Features ...
Capacity: 10,000 kg
Tray length: 5 m
The hydraulic table lifts have been designed to facilitate loading in any type of factory, laboratories and warehouses. They are manufactured according to specific requirements and are used to bridge ...
Capacity: 3,000 kg
Lifting height: 200 mm - 1,500 mm
It is a Scissor Lift Table designed to improve the operators efficiency during assembly and welding processes. It is proposed in 2 main versions: Standard (Up/Down movements) and with Electrical Table ...
Capacity: 2,000 kg
Lowered height: 80, 85, 200, 250, 100 mm
Lifting height: 760 mm - 1,200 mm
... rods. Lift and lower by easily push buttons te reach the ergonomically correct working height. With emergency switch off and a 3m long control cable. With different loading capacity up to 3000kg for your option. - ...
Capacity: 500 kg - 10,000 kg
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 50,000 kg
Lifting height: 2,600 mm
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 1,500 kg - 10,000 kg
Lifting height: 5 m
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 3,000 kg
Lowered height: 12 cm
Lifting height: 168, 135 cm
New pulling tower with smooth and accuracy displacement of 180º. Solid and compact frame with 3 m. length for any repair. Double safety device and twin lifting rams.
ASTRA
Capacity: 3,000 kg
Lowered height: 12 cm
Lifting height: 168, 135 cm
New pulling tower with smooth and accurate displacement of 180º Long frame with 4 m also for VANS and long "sedans" Double safety device and twin lifting rams
ASTRA
Capacity: 3,500 kg
Lowered height: 14 cm
Lifting height: 171, 138 cm
New pulling tower with smooth and accurate displacement of 180º. 3,3 m chassis with 45o corners for better side pulling. Double safety device and twin lifting rams.
ASTRA
Capacity: 10,000 kg
Lifting height: 885 mm - 6,000 mm
General Specifications • - Only lift goods. It is not proper for person carry • - ESP.1: Single Scissor Lift Table (X) • - Trap prevention touch sensitive trip bars under the perimeter ...
ONDER GRUP MAKİNE
Capacity: 500, 1,000, 2,000, 4,000 kg
Lifting height: 1,485 mm - 4,860 mm
General Specifications • - Only lift goods. It is not proper for person carry. • - ESP.2: Single Scissor Lift Table (XX) • - ESP.3: Single Scissor Lift Table ...
ONDER GRUP MAKİNE
Capacity: 2,000, 4,000, 6,000 kg
Lifting height: 1,360 mm - 2,000 mm
... . Heavy duty cylinders and check valve to stop the lift table lowering in case of hose burst High quality hydraulic cylinders Heavy duty cylinders and check valve to stop the lift ...
ONDER GRUP MAKİNE
Capacity: 500, 1,000, 2,000, 4,000 kg
... universal stationary lifting table for lifting heavy loads can be used in a space-saving manner by placing the lifting table in a pit. Properties •Robust ...
Capacity: 2,000 kg
Lowered height: 280 mm
Lifting height: 1,210 mm
The platform is a mobile device designed to lift or lower loads
Capacity: 50,000 kg
Lifting height: 5,000 mm
The Lifting Table is manufactured by Enzfelder GmbH. Scissor lift tables for lifting and lowering with a wide range of accessories with hydraulic cylinders and ...
Capacity: 0 kg - 80,000 kg
Lifting height: 100 mm - 3,000 mm
Rugged and reliable, the XN series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power unit and electrical ...
TESIS ENGINEERING SRL
Capacity: 0 kg - 20,000 kg
Lifting height: 500 mm - 9,000 mm
Rugged and reliable, the multiple scissors XH -XT -XQ series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power ...
TESIS ENGINEERING SRL
Capacity: 0 kg - 80,000 kg
Lifting height: 500 mm - 3,000 mm
Rugged and reliable, tandem and multiple scissor XL series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power ...
TESIS ENGINEERING SRL
ERIMAC's tables allow the handling, the lifting, the vivration of an unitarian load. DOMAINS OF USE Our machines are designed for industrial exploitation. • Atmosphere without specific constraint. • Atmosphere ...
ERIMAC's tables allow the handling, the lifting, the vivration of an unitarian load. DOMAINS OF USE Our machines are designed for industrial exploitation. • Atmosphere without specific constraint. • Atmosphere ...
Capacity: 2,500, 1,000 lb
Lifting height: 48 in
... truck • Lower fenders permit a pallet truck to enter table with a loaded pallet raised above the fenders, enabling the pallet to be set on the fenders, close to operators reach. May ...
Air Technical Industries
Capacity: 10,000, 25,000, 4,000, 6,000, 50,000 lb
Lifting height: 40 in - 111 in
... event of a hydraulic failure • All standard scissor lift tables have hydraulic lift up and gravity lowering. If lowering speed is required, then order optional Double Acting Power System • ...
Air Technical Industries
Capacity: 2,500, 1,000 lb
Lifting height: 48 in
... maximum lifting stability • Lifting table travels on rollers eliminating rubbing, friction and binding. Rollers are adjustable; level lifting is maintained at all times. • Manual or electric operation • ...
Air Technical Industries
Capacity: 11.3 kg
Weight : 0.59 kg - 0.91 kg
... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...
VELMEX, Inc.
Capacity: 13.6 kg
Weight : 1.25 kg - 2.13 kg
... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...
VELMEX, Inc.
Capacity: 22.7 kg
Weight : 3.04 kg - 4.18 kg
... unobstructed lift. Velmex pre-configured Elevating Tables lift to a height of 15.5" (393.7 mm) with a travel distance of 9" (165.1 mm). The large table can handle ...
VELMEX, Inc.
Capacity: 30,000 kg
Lifting height: 2,300 mm
The PE 30/X, a lifting platform manufactured by Morello, is used to lift any kind of load in simple, functional and secure way. Ascending platforms are typical in all manufacturing areas, with consequent reduction of ...
Capacity: 12,000 kg
Lifting height: 2,450 mm
Morello's lifting platforms are used to lift any type of load in an easy, functional, and safe way. It is suitable for manufacturing sectors, with reduced work time and production cost. The platforms are constructed ...
Capacity: 1,000, 1,500, 2,000, 2,500, 3,000 kg
Lifting height: 500, 1,000, 1,500, 2,000, 2,500 mm
HYDRAULIC LIFTING TABLES WITH INTEGRATED ROLLER CONVEYOR Hydraulically operated lift tables are universally applicable, combining excellent value for money with long ...
Dynalserg, S.L.
Capacity: 500, 30,000 kg
Lifting height: 400 mm - 7,000 mm
Our lifting tables for production lines are tailor-made solutions to meet the specific requirements of each sector. Dynalserg's product line is characterised by the use of selected materials, a robust ...
Dynalserg, S.L.
Capacity: 3,000 kg
Lowered height: 80 mm
Lifting height: 1,100 mm
Control material flow and improve factory or warehouse efficiency with our robust ETP lift table. Made from high quality components, the table operates reliably and safely and provides ...
Dynalserg, S.L.
Lift tables The ITS Europe lift tables on air-bearings or air cushions swivel omnidirectionally in complete 2D freedom. By using lift tables ...
Capacity: 160 kg
Lifting height: 320 mm - 1,280 mm
... tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has ...
REXEL
Capacity: 130 kg
Lifting height: 320 mm - 1,280 mm
... tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has ...
REXEL
Capacity: 130 kg
Lifting height: 320 mm - 1,280 mm
... pneumatic cylinder is foot-controlled. - The table has a connection slot for pneumatic tools. - After turning the table off it blocks automatically (cutting power off does not make the table ...
REXEL
Capacity: 1,000, 2,000 kg
Lowered height: 205, 230 mm
Lifting height: 1,050, 1,000 mm
... PLATFORM HW-C SERIES with perimeter protection The lifting platforms HW-C series are lifting equipment to be installed in a fixed position and are driven by a hydraulic power pack. Manufactured according to the accident ...
Capacity: 1,000 kg
Lowered height: 85 mm
Lifting height: 860 mm - 860 mm
... for transportation and installation Mechanical lock for maintenance Painting with yellow RAL 1028 Passage width for the pallet mm. 585 Suitable only and exclusively for lifting goods with a uniformly distributed load
Capacity: 1,000 kg
Lowered height: 85 mm
Lifting height: 860 mm - 860 mm
... unloading with pallet LOW PROFILE LIFTING PLATFORM HY1001 (extra-flat) SERIES HY Lifting platform HY 1001 pantograph with low profile. Also included in the price is the access ramp of 1200 mm length, for the discharge ...
Capacity: 2,000, 800, 1,000, 500 kg
Lifting height: 200 mm - 1,250 mm
... Series lifting tables respond effectively to the main needs of loads’ lifting up to 2.000 kg capacity. It is therefore possible to pick beyond 20 models, entirely built, set up and tested into the Armo’s ...
Armo s.p.a.
Capacity: 2,000, 1,000 kg
Lifting height: 80 mm - 880 mm
Our extra flat lifting tables are perfect to lift pallets, with no need to make a pit. Once it gets closed, it has a very small height to the ground, and is provided with a hydraulic ...
Armo s.p.a.
Capacity: 40,000, 500 kg
Lifting height: 3,000 mm
... tailor-made scissor lifting tables specific for heavy loads’ lifting. Dimensions, capacity and stroke will be set down at the design, and realized according to the customer’s specific needs.. Our heavy ...
Armo s.p.a.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining