- Robotics - Automation - Industrial IT >
- Automation >
- Insulated I/O >
- CONTEC
CONTEC insulated I/O
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
CANopen I/O module 2 isolated analog inputs Can be connected to CANopen network and can be installed on DIN rail -2 configurable universal inputs: -Thermocouples: TC J, K, L, N, R, S, T -Thermoresistances: ...
ASCON TECNOLOGIC
CANopen and Modbus I/O module 16 isolated digital inputs Can be connected to CANopen and Modbus network and can be installed on DIN rail -16 opto-isolated digital inputs: UL (state 0): -3 … + 11/5 Vdc, ...
ASCON TECNOLOGIC
CANopen I/O module 32 isolated digital inputs Can be connected to CANopen network and can be installed on DIN rail -32 optically isolated digital inputs: -UL (state 0): -3 … + 11/5 Vdc, -UT (transition): ...
ASCON TECNOLOGIC
... removable European type connector - LED indicators for I/O status - Supported operating systems: Windows XP/7/8/10 The USB-5800 series are industrial isolated digital input and output USB 3.0 I/O ...
ADVANTECH
... removable European type connector - LED indicators for I/O status - Supported operating systems: Windows XP/7/8/10 The USB-5800 series are industrial isolated digital input and output USB 3.0 I/O ...
ADVANTECH
- Suitable for EtherCAT networks - 8-ch, 16-bit analog input channels with 2,500 VDC isolation - ±275 V high common-mode voltage range - Quick removable European type connector - Supports EtherCAT Distributed Clock ...
ADVANTECH
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with 16 channels and each have LED indicator. 2.supports an overall of 1024 ...
... Technical Parameters General parameters Power: Max.90mA@5.0Vdc Isolation: I/O to internal bus: opto-couple isolation (3KVrms) Field Power: Not used Wiring: I/O wiring:Max.1.5mm2(AWG 16) Mounting ...
CT-222H: 32 channels digital output, source, 24Vdc/0.5A,34Pin male connector ◆ the module supports 32 channels digital output; the output voltage is 24VDC and the output high level is valid. ◆ module can drive field equipment. (relay, ...
4 galvanically isolated input channels for non-insulated thermocouples at high potential Cold junction compensation Signal conditioning digital filter, average, scaling, min/max storage, arithmetic, alarm Dynamic ...
4 galvanically isolated input channels for non-insulated thermocouples at high potential Cold junction compensation Signal conditioning digital filter, average, scaling, min/max storage, arithmetic, alarm Dynamic ...
4 galvanically isolated input channels for non-insulated thermocouples at high potential Cold junction compensation Signal conditioning digital filter, average, scaling, min/max storage, arithmetic, alarm Dynamic ...
The Z-D-IN is used to interface 5 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocol MODBUS RTU through the RS485 serial interface. ...
ZC-8AI is used to interface analog inputs (Voltage or current, also with bipolar range) with the CANopen system. The module is able to supply all 8 current loops at the same time, this is very useful for 2-wire sensors because the wiring ...
CANopen module with 8 digital I/Os • Inputs 24 V • Outputs 24 V/1 A • Input/output programmable CANopen According to CiA® Standards • CiA 301 CANopen application layer • CiA 401 generic I/O-modules 32 ...
esd electronics gmbh
CANopen module with 8 analog Inputs • 8 A/D-Converter Inputs • Resolution: 14 bit • Input voltage range: ±10.24 V • Sample rate: up to 100 μs / 8 channels simultaneously • CANopen profiles according to CiA® specification ...
esd electronics gmbh
CANopen module with 4 analog outputs • Resolution: 12 bits plus sign • Output voltage range: ±10V • CANopen profiles according to CiA® specification CiA 301 and CiA 401 Approved Reliability and Ease of Use • Electrical ...
esd electronics gmbh
... analog signals from the actor and sensor level directly to a control unit in building automation via BACnet MS/TP protocol. 29 I/Os, some of them are configurable, are available for different tasks. The inputs and outputs ...
The PCH Raw Data Box provides four additional raw data output channels to PCH Engineering’s top-of-the-line vibration monitor, PCH 1420. PCH Raw Data Box is a stand-alone module in PCH Engineering’s modular condition monitoring solution, ...
The device DAT10014 converts up to 4 analogue input signals into engineering units in digital format. The data are transmitted with MODBUS RTU / MODBUS ASCII protocol over the RS-485 network. It is possible to connect on input RTD, ...
DATEXEL SRL
... 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ports are insulated at 1kV > Termination: the node needs a termination of 120Ω 1 / 4W already supplied and ...
ELCO Elettronica di A. Ligabue e C. snc
... ° C > Power supply: 24Vdc (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ports are insulated at 1kV > Termination: the node needs a termination of 120Ω 1 / 4W already supplied and ...
ELCO Elettronica di A. Ligabue e C. snc
... 70 ° C > Power supply: 2V (18-36V) - 0.5Adc > Electrical Insulation: the inputs, outputs, and communication ports are insulated at 1kV > Termination: the node needs a termination of 120Ω 1 / 4W already supplied and ...
ELCO Elettronica di A. Ligabue e C. snc
This product is a PCI bus-compliant interface board used to provide a digital signal I/O function on a PC. This product can input and output digital signals at 12 - 24VDC. PIO-64/64L(PCI)H features 64 opto-coupler isolated ...
The IA-3118-E is an industrial, high power, high voltage monitor and control device. All isolated digital input channels are isolated from each other and are digitally filtered to ensure reliable operation in a noisy factory floor environment. ...
Intelligent-Appliance
FEATURES - 16 optocoupler inputs (3..32V) - 16 semiconductor switches with high-side drivers (5..32V) - 2 counters (32 bit) for pulse, incremental encoder, or pulse-time measurement - supply 7..32V (external) or 5V (internal) - USB ...
... MODBUS RS485 versions. Device able to provide voltage, current signals and current loop, using four different and galvanic insulated channels and power lines. -Input Voltage: 7-32 VDC -Typ. Absorbed: current ...
... Installation This is a 8 Channel I2C Optically isolated digital input board. This board has an I2C digital IO expander chip MCP23008. The MCP23008 Digital IO pins are connected to the optocouplers. ...
External 16 isolated logical channels adapter - 16 isolated logical channels (250V) - High voltage input on safety banana plugs - Fully compatible with DAS30, DAS50, DAS800, DAS801, DAS1600 and 8460 - External power supply ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining