- Machine-tools >
- Machine Tool Accessory >
- High-precision chuck >
- D'ANDREA SpA
D'ANDREA SpA high-precision chucks
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... best described in two words as precise and quick! The MacroNano clamping system links the production chain through an ultra-precision coupling both for workpiece and electrode holding…
Centro-P, ER Précision Collet Chuck The Centro-P ER précision collet chuck is among the very best collet chucks available. Unique, patented design ...
Clamping range: 40 mm - 125 mm
Many components and machine tools require long tool assemblies to reach down in large components. Vibration risk is high and the remedy is either slow machining or damped tools. With Silent Tools, ...
Sandvik Coromant
Clamping range: 0 mm - 16 mm
• Self-tightening flat jaw drill chuck. • Industrial design with maximum precision. • Strong retaining ring • All components made from steel • Hardened and ground • Only suitable for clockwise ...
Clamping range: 0 mm - 13 mm
• Self-tightening flat jaw drill chuck with metal sleeve and clamping force safety device. • Industrial design with maximum precision. • The locking of the pawl prevents the unintentional release ...
Clamping range: 18 mm - 100 mm
Rotational speed: 0 rpm - 7,000 rpm
... ensures an extremely constant production flow and therefore maximum reliability. By the way, our segmented clamping bushings offer a factory-standard run-out accuracy of ≤ 10 μm. If you need even greater precision, ...
Clamping range: 20 mm - 120 mm
Rotational speed: 5,000, 4,000, 7,000, 6,000, 3,200 rpm
... the clamping head engages. MANDO Adapt is attractive with extreme rigidity and precision. Without adjusting For rotating products, concentricity of 0.005 mm between chuck taper and mandrel taper ...
Clamping range: 8 mm - 291 mm
Rotational speed: 0 rpm - 400 rpm
... the opposing jaws and 2-sided clamping possible as a stationary chuck or centric clamping vice - ideal for clamping workpieces sensitive to deformation - for I.D. & O.D. clamping - high repeatability ...
... cutting macines and common glass cutting machines etc. the features of the glass cutter holder are strong applicability, high precision, and long service life. Holders can be manufactured according to ...
Clamping range: 1.5 mm - 200 mm
Rotational speed: 3,500 rpm - 6,300 rpm
... turning and grinding operations Parallel clamping across the entire stroke Large clamping range per change-over collet Minimal change-over times Stable and robust chuck High RPM Suitable ...
SwissChuck AG
Rotational speed: 500 rpm
... Perfectly suited for large workpieces Clamping on the external and internal diameter Large through-bore clearance Power chuck actuated by pneumatic force clamping cylinder Ideal chuck ...
SwissChuck AG
Rotational speed: 5,000, 3,500, 1,500, 2,250 rpm
... pneumatic diaphragm chucks of the 6VMCHP series clamp workpieces at the highest precision. This chuck repeatably achieves a concentricity of ≤ 0.002 mm. Due to the force distribution ...
SwissChuck AG
... hydraulic toolholders. ETP ECOGRIP has a very compact and robust design. Tool changes are made quickly, easily and with high level of precision. With the minimum tool runout a good surface quality is ...
ETP
ETP HYDRO-GRIP® has a very compact and robust design. Tools changes are made quickly, easily and with a high level of precision. The high clamping force guarantees a secure clamping of ...
ETP
Heavy Duty version - Up to 1 670 Nm holding force! ETP HYDRO-GRIP® HD, Heavy Duty, is the first hydraulic Power chuck available on the market. Here ETP combine all the positive benefits of hydraulic ...
ETP
Clamping range: 18 mm - 140 mm
Clamping range: 12 mm - 130 mm
Clamping range: 7 mm - 80 mm
... precise runout of the tool shaft combined with high damping capability allow high performance milling operations at high speed. DMS tool holders have excellent vibration-damping compared ...
Helmut Diebold
Clamping range: 20 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 25, 32, 20 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 20, 25, 32, 42 mm
High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 0.3 mm - 34 mm
16 degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only those that meet the standards THREE TIMES are ...
Reduce interference / Avoid hitting Change the collet size Easily to Change the extension length Quick change system Best suited for quick tool change as the cutting tools can be preinstalled. Length presetting Tools can be ...
Clamping range: 122, 106, 84, 136 mm
Mechanical manual chucks with high precision, holding force and rigidity for use on machining centers, prototyping and metrology. The version SK -2 provides, due to the optimized force ...
Clamping range: 0 mm - 16 mm
IZAR CUTTING TOOLS S.A.L.
... electrical power consumption - high concentricity - better life time of the tool, reduced wear, less unbalanced mass - avoiding premature wear - less maintenance intensive - exact disengaging point - exact thread ...
SELECTED TO LAST. Diversity, high quality and precision: Tool holders from 8x8 to 32x32 mm. This is where you’re assured to find the right KMH tool holders to meet your requirements: with or without ...
Clamping range: 1 mm - 20 mm
Rotational speed: max 25000.0 rpm
CENTRO P GER - Slim Version for HPCM Mini Clamping Nuts CENTRO P GER - Version for HPC Clamping Nuts
FAHRION
... and extend longevity of chuck. The high clamping force is available. The product can prevent the cutting tools from slipping when the users worked it and increase the longevity of cutting tools. High ...
... dropping and extend longvity of chuck. The high clamping force is available. The product can prevent the cutting tools from slipping when users worked it and increase the longvity of cutting tools. High ...
... dropping and extend longvity of chuck. The high clamping force is available. The product can prevent the cutting tools from slipping when users worked it and increase the longvity of cutting tools. High ...
... fine-balanced, balancing-grade = G 2.5 @ 22000 min-1 Type H colletholders are ready to accept Hi-Q balancing rings which allow precision balancing of the system including cutting tool up to 80000 min-1 depending on the ...
REGO-FIX
... fine-balanced, balancing-grade = G 2.5 @ 22000 min-1 Type H colletholders are ready to accept Hi-Q® balancing rings which allow precision balancing of the system including cutting tool up to 80000 min-1 depending ...
REGO-FIX
... fine-balanced, balancing-grade = G 2.5 @ 22000 min-1 Type H colletholders are ready to accept Hi-Q® balancing rings which allow precision balancing of the system including cutting tool up to 80000 min-1 depending ...
REGO-FIX
Application Endmilling (Feature) (High Rigidity ) Special locking function assures rigid connection to the machine spindle. (High Precision ) High precision collet, ...
Clamping range: 75 mm - 200 mm
Rotational speed: 15,000 rpm
... 0.005 mm; ● Max. RPM: 20,000; ● Pre-balanced: G2.5; ● Internal Coolant. Application: ● This ER collet chuck is for high precision machining with cylindrical cutters, drills and mills.
Super-precision hydraulic expanding mandrels are a very precise and suitable alternative for grippers and fixtures available on the market and/or designed for specific purposes. One of the problems in material ...
Power Collet Chuck is an advanced and economic clamping device for holding the parts during the machining operation. Power Collect Chucks are usually the best substitution for normal lathe chucks ...
We carry a variety of CAT 40 end mill holders and CAT 50 end mill holders in metric and inch sizes. Also, find Morse Taper Holders, Jacob Taper Adapters, and Shell Mill Holders for CNC milling. CAT tools are also known as Caterpillar “V-flange”.
It is a line of high precision modular tool-holders used to perform with extreme flexibility and rigidity operations of boring, milling, drilling and tapping. The MHD coupling is the strength of the ...
D'Andrea S.p.A.
Rotational speed: 500 rpm
... Improves Thread Quality and Tool Life Absorbs the pitch difference between the tap and spindle when using rigid tapping High Accuracy Runout Utilizing MEGA Micro Collets
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining