- Hydraulics - Pneumatics >
- Valve >
- Membrane solenoid valve >
- Danfoss
Danfoss membrane solenoid valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.8 mm - 1.3 mm
Voltage: 6 V - 24 V
Temperature: 0 °C - 50 °C
... -separating solenoid valves Series KDV are designed to control critical fluids such as aggressive, high-purity or temperature-sensitive fluids. To prevent the controlled fluid from interacting with the ...
DN: 0.8 mm - 2 mm
Voltage: 12, 24 V
Temperature: 10 °C - 50 °C
... design Series PDV directly operated solenoid valve is available with several nominal diameters and in three different versions according to the electrical connection. Moreover, the fluid separation ...
DN: 1.4 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 140 °C
» Solenoid valves for air and water » Great reliability over time, even in heavy working conditions Series CFB solenoid valves for general purpose are available in ...
Voltage: 12, 24 V
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 2 bar
The Clippard NIV Series Media Isolation Valve is a solenoid-operated device that uses a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves ...
Voltage: 6 V
Pressure: 30 psi - 100 psi
Medium: Air Material: Anodized aluminum body, Nitrile diaphragms Input Pressure: 30 to 100 psig max. Air Flow: 22 scfm @ 100 psig Bleed: 0.1 scfm @ 100 psig Filtration: 10 micron Frequency Response: 50 Hz @ 100 ...
DN: 0.25 in - 1.5 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar
Servo-controlled 3-way vacuum solenoid valves The 3-way vacuum solenoid valves in this series are 2-position valves with pneumatically servo-controlled ...
DN: 6 mm - 50 mm
Voltage: 24 V - 240 V
Temperature: -10 °C - 60 °C
EV220A is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features • For water, oil, compressed air and similar ...
Danfoss Industrial Automation
DN: 40, 50, 13.5, 27.5 mm
Voltage: 24, 230, 110 V
Temperature: -10 °C - 80 °C
... such as cooling or filling systems • Vacuum • Liquid gas • Filling systems Design • Diaphragm valves • Forced lifting of the valve diaphragm • 2/2-way valve, ...
FESTO
DN: 13 mm - 50 mm
Voltage: 110, 230, 24 V
Temperature: -10 °C - 60 °C
The poppet valve with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection via solenoid ...
FESTO
Voltage: 24, 12 V
Temperature: 0 °C - 50 °C
Pressure: -0.7 bar - 3 bar
... VYKB is a media separated solenoid valve. It is used to control gaseous and liquid media in laboratories. The valve VYKB is a directly actuated directional control valve ...
FESTO
DN: 13 mm - 50 mm
Voltage: 24 V
Temperature: -30 °C - 190 °C
The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm ...
BÜRKERT FLUID CONTROL SYSTEMS
DN: 0.8 mm - 2 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C
• 2/3-Port Solenoid Valve for Chemical Liquids • Applicable fluid: Chemical liquids • Flow rates up to 0.9 l/min (water) and 57 l/min (air) • Isolated structure • With power saving circuit • 2 models: ...
SMC
DN: 7 mm
Voltage: 24, 12 V
Temperature: 4 °C - 49 °C
LFN Series valves are compact 7 mm, chemically inert diaphragm style isolation valves designed for applications flowing aggressive fluids. Available in a 2-way, normally closed, bi-directional ...
DN: 13 mm
Voltage: 12, 24 V
Temperature: 1 °C - 49 °C
LFV Series valves are 13mm chemically inert, isolation style solenoid valves designed for applications flowing aggressive fluids. Available in a 2-way, normally closed, bi-directional ...
DN: 25 mm
Voltage: 24 V
Temperature: -10 °C - 50 °C
Valve operates without differential pressure Suitable for vacuum For systems with low or fluctuating pressure Solenoid interchangeable without tools (Click-on®)
Norgren
DN: 10 mm
Voltage: 24 V
Temperature: -10 °C - 50 °C
Suitable for vacuum Compact solenoid with integrated core tube Valve operates without pressure differential (∆p) Operating pressure 0 to 20 bar with a.c. coil and NBR seals Operation: - 2/2
Norgren
DN: 25 mm
Voltage: 24 V
Temperature: -20 °C - 85 °C
Control via separate pilot valve or control unit Solenoid interchangeable without tools, all internal components captive Simple construction for ease of maintenance Medium: - Compressed Air
Norgren
DN: 0.75 in - 3 in
Voltage: 24 V - 230 V
The ASCO Series 353 is a diaphragm-operated solenoid valve specially designed to deliver extremely fast pulsing in reverse-jet dust collector systems. With its high flow and quick opening and closing, ...
ASCO
DN: 0.5 in
Voltage: 24, 220, 230 V
Temperature: -10 °C - 100 °C
Parkers' 2-Way Normally Open G 1/2" Solenoid Valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves ...
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... Reset: Spring Valve type: Poppet valve Order no.: 97.100.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...
Kendrion Kuhnke Automation GmbH
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... Reset: Spring Valve type: Poppet valve Order no.: 97.100.24.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...
Kendrion Kuhnke Automation GmbH
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... Reset: Spring Valve type: Poppet valve Order no.: 97.110.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...
Kendrion Kuhnke Automation GmbH
DN: 0.5, 0.375 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 100 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing 0.5 - 4 s Duty cycle: continuous (ED100%) Cycling rate: 10 - 100 cycles/min Electrical protection: IP65 (with ...
JAKSA SOLENOID VALVES
DN: 0.375, 0.5 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 100 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing 0.5 - 4 s Duty cycle: continuous (ED100%) Cycling rate: 10 - 100 cycles/min Electrical protection: IP65 (with ...
JAKSA SOLENOID VALVES
DN: 0.5 in
Voltage: 24, 230, 115 V
Temperature: -10 °C - 100 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing 0.5 - 4 s Duty cycle: continuous (ED100%) Cycling rate: 10 - 100 cycles/min Electrical protection: IP65 (with ...
JAKSA SOLENOID VALVES
DN: 2 mm
Voltage: 12 V - 230 V
Temperature: -20 °C - 100 °C
... -way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available ...
DN: 0.375 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
S1030 solenoid valve is pilot perated . This 2/2 way solenoid valve is typically closed, and is applicable to water, oil, gas, and air. Its tube and internal parts are ...
DN: 2 mm
Voltage: 12, 24 V
Pressure: -70,000 Pa - 300,000 Pa
Structure - Direct-acting diaphragm, 2 way NC No.of ports - 2(specified inlet and outlet) Body material - POM,PVDF,PTFE Diaphragm material - EPDM,FKM,FFKM Voltage - 12V/24V Flow rate - 6.8g/s(25℃,50KPa ,H2O) Power ...
Keyto Fluid Technology
DN: 2.4 mm
Voltage: 24 V
Pressure: 0 bar - 4.5 bar
Wetted material - PPA diaphragm material - FKM Dimension - 40.5*23*65.4 No. of ports - 2 Power Consumption - 6.5W Structure - Direct acting piston type Voltage - / Flow Rate - 10L/min Main Features - 1. Small ...
Keyto Fluid Technology
DN: 1.5 mm
Voltage: 12, 24 V
Pressure: -70,000 Pa - 400,000 Pa
Structure - Rocker diaphragm type, 2 way NC No.of ports - 2(specified inlet and outlet) Body material - PEEK,PVDF Diaphragm material - EPDM,FKM,FFKM Flow rate - 6.5g/s(25℃,50KPa ,H2O) Power consumption ...
Keyto Fluid Technology
DN: 10, 14, 18, 25 mm
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 25 bar
Component Parts and Materials 1 Body: Brass 2 Seals: NBR - EPDM - FKM 3 Welded armature tube: Stainless steel 4 Fixed and mobile core: Stainless steel 5 Springs: Stainless steel Room temperature with coil class H - 10 °C + 80 °C
DN: 5 mm - 50 mm
Voltage: 12 V
Temperature: -20 °C - 80 °C
... is the largest solenoid valve manufacturer in India and a leading global solenoid valve supplier. Since 1967, Rotex has served over 7000 customers across 73 countries ...
Rotex Automation Limited
Voltage: 24 V - 240 V
Temperature: -25 °C - 75 °C
Pressure: 1 bar - 6 bar
... 28 NB Pulse Jet Solenoid Valve from Rotex includes a hytrel diaphragm and a normally closed condition valve. A large exhaust area is integrated onto the valve, ...
Rotex Automation Limited
DN: 1 mm - 7 mm
Voltage: 12 V
Temperature: -10 °C - 70 °C
MOC: CF8 (SS304 Cast) | CF8M (SS316 Cast) Solenoid: Explosion Proof Media:Air | Fuel | LPG Application: LPG Dispensing | Fuel Dispensing Certificate: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL
Rotex Automation Limited
DN: 10 mm - 25 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C
VQ membrane electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used ...
... pilot solenoid valve for waterImproved corrosion resistanceCorrosion resistance has been improved by utilizing a highly corrosion resistant material.Body material and sealing material can be selected, ...
DN: 15 mm - 98 mm
Voltage: 110, 12, 230, 24 V
Temperature: -30 °C - 180 °C
Port Refer below technical data sheet (Available BSP / NPT) End Connection Screwed / Flange Body Material SS ASTM A351 Grade CF8 / CF8M Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion ...
UFLOW AUTOMATION
DN: 0.375 in - 4 in
Voltage: 110, 230, 12, 24 V
Temperature: -30 °C - 180 °C
Port Refer below technical data sheet (Available BSP / NPT)End ConnectionScrewed / FlangeBody MaterialSS ASTM A351 Grade CF8 / CF8MMedia Temp & seal o ring Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior ...
UFLOW AUTOMATION
DN: 0.375, 0.5 in
Voltage: 230, 12, 24, 110 V
Temperature: -30 °C - 180 °C
... port is recommended. Preferably Over Horizontal Pipeline with the coil upright.CautionAC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2
UFLOW AUTOMATION
Temperature: 0 °C - 60 °C
Pressure: 29 psi - 131 psi
• High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.
DN: 1.5 in - 12 in
Voltage: 220, 110 V
Pressure: 0 bar - 144.2 bar
Model DTE / DFE , A solenoid control valve with diaphragm design, is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. ...
DN: 0.8 mm - 4 mm
Voltage: 12 V - 24 V
Temperature: 0 °C - 50 °C
... wide versatile general purpose media separated solenoid valve for water, aggressive fluids, and gases. Especially recommended with concentrated liquid chemicals such as fertilizer, acids, bases. Valve ...
DN: 8 mm - 8 mm
Voltage: 6 V - 24 V
Pressure: -1 bar - 0.5 bar
High flow media separated valve with manual flow control.
DN: 0.8 mm
Voltage: 6 V - 24 V
Temperature: 10 °C - 50 °C
A miniature media-separated solenoid valve 5mm wide 0.8mm orifice Low dead volume, low power and long lifetime. For aggressive fluids and gases Ideal for liquid sampling and analyses. This product ...
DN: 15 mm - 50 mm
Voltage: 230, 24 V
Temperature: 50 °C
... and the attached pilot membrane (5) goes up and releases a discharge hole at the valve outlet. This produces a depressurization above the membrane (2) and the valve ...
DIVATEC,SL
DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C
... the upper part of the membrane (2), the valve is closed. • During the connection, the pilot valve is first opened, that is, the magnet frame and the attached pilot membrane ...
DIVATEC,SL
DN: 1 mm - 2.5 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C
• Direct action with insulating diaphragm • PVC, PTFE materials Function • Closed without current (NC) • Directly controlled
DIVATEC,SL
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining