- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Duct fan >
- Dresser-Rand
Dresser-Rand duct fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 3,000 m³/h - 22,000 m³/h
... frequency inverter The SIF is a central fan with an insulated case made for general filtration- and welding fume extraction systems The SIF ventilation fans are designed for use as central fans. ...
Air flow: 177 m³/h - 883 m³/h
... with One Fan Effective cooling is possible using a large cooling fan offering high static pressure. Using one large axial fan is more efficient than using multiple small axial fans. ...
Air flow: 0 m³/h - 1,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...
Air flow: 0 m³/h - 3,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...
Air flow: 2,000 m³/h - 4,000 m³/h
Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are ...
Air flow: 62,000 m³/h
FC series Product specification: Aerofoil section aluminium die-cast blade for use in aerodynamically designed air duct systems, available in full bell mouth plate design and cased design. Available dimensions 315 ...
ZIEHL-ABEGG
Air flow: 2,200 m³/h - 19,200 m³/h
The highly durable Master mobile ventilators with high air flow are designed to support drying, heating and cooling equipment. It can be used in rooms to provide improved ventilation, air circulation and to dry moist areas. Available ...
VC – Duct fan units Small dimensions. Maximum simplification of ductwork due to linear air discharge. Installed inside ducts. Closed synchronous motor with external rotor – single-phase ...
Air flow: 37,000 m³/h
... ease of installation The RWM 57 is supplied with tested accessories for integration into the façade and connection to the duct system A specially designed system of electrical components including smoke detector switchgear, ...
Nicotra Gebhardt
Air flow: 1,200 m³/h
Diameter: 100 mm - 315 mm
... folded spiral-seam tubes (Spiro), flexible aluminium or plastic tubes with standardised diameter can be used. Rosenberg tube fans can be used in all mounting positions. When used over several floors of a building, the ...
Rosenberg Ventilatoren GmbH
Air flow: 2,400 m³/h
Diameter: 125 mm - 400 mm
... mineral fibre plates inserted in the REVOLUTION Series act as sound insulation. The cover can be simply screwed off, making the fan area easily accessible for cleaning and maintenance. The motor can be disassembled with ...
Rosenberg Ventilatoren GmbH
Air flow: 12,000 m³/h
... casings are made of galvanised sheet steel, formed as a rectangular duct, for direct installation in air ducts in any position. Suction and pressure side equipped with standard flanges. The complete motor-impeller ...
Rosenberg Ventilatoren GmbH
Air flow: 216 m³/h - 2,138 m³/h
Diameter: 100 mm - 315 mm
Rotational speed: 2,320 rpm - 2,710 rpm
Range of low profile in-line mixed-flow fans for circular ducts. The range comprises seven diameters and covers a flow range from 210 to 1840 m3/h. The unique design of the support bracket allows the ...
Soler & Palau
Air flow: 190 m³/h - 1,780 m³/h
Diameter: 100 mm - 315 mm
Rotational speed: 1,100 rpm - 2,650 rpm
... temperature: -20/40ºC. The TD EVO fans offer the ideal in-line duct fan solution for a wide range of general residential or commercial ventilation application into. Very low profile The ...
Soler & Palau
Air flow: 216 m³/h - 2,138 m³/h
Diameter: 100 mm - 315 mm
Rotational speed: 2,320 rpm - 2,710 rpm
... the main body and the support bracket to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent-block between the motor and the guide vane to reduce the motor’s vibrations and ...
Soler & Palau
Air flow: 3,000 m³/h - 28,000 m³/h
Diameter: 400 mm - 1,250 mm
Rotational speed: 270 rpm - 1,440 rpm
... air duct and cover net. To be specific, the impeller is made of high-strength aluminum alloy sheet by molding. The motor is outdoor type with protection class IP 55 (or 56) and insulation class F (or H), fully sealed ...
ERG Technology
Air flow: 399 m³/h - 2,856 m³/h
Rotational speed: 1,460 rpm - 3,570 rpm
Noise level: 29 dB - 38 dB
... series of in-line duct extractors. Fan: • Acoustic casing covered with sound absorbing material. • All models equipped with a backward curved impeller. • Standardised inlet and outlet flanges allowing ...
SODECA
Low noise, in-line duct extractor fans mounted inside an acoustic casing Fan: • Acoustic casing covered with sound absorbing material. • Backward curved impeller, except models 125-150-200, ...
SODECA
Air flow: 290 m³/h - 1,975 m³/h
Rotational speed: 1,350 rpm - 2,750 rpm
Noise level: 30 dB - 49 dB
Low noise, in-line duct extractor fans mounted inside an acoustic casing Fan: • Acoustic casing covered with sound absorbing material. • Backward curved impeller, except models 100, ...
SODECA
Air flow: 0.515, 0.452, 0.384 m³/s
Diameter: 315 mm
Rotational speed: 1,395 rpm
... of air against low resistance. The fan design, construction and finish provide a strong, durable and weatherproofed range. Easy Installation Fans are supplied with a fitted IP55 terminal box, which ...
ELTA FANS
Air flow: 0.432 m³/s - 1.36 m³/s
Diameter: 450 mm
Rotational speed: 1,375 rpm
... of air against low resistance. The fan design, construction and finish provide a strong, durable and weatherproofed range. Easy Installation Fans are supplied with a fitted IP55 terminal box, which ...
ELTA FANS
Air flow: 0.036 m³/s - 0.135 m³/s
Diameter: 100 mm
Rotational speed: 3,665, 3,205, 2,455, 1,495 rpm
... rotor motor, provide low specific fan powers and stepless speed control without tonal noise generation. Controllability EC motors provide precise speed control via potentiometer, BMS or Elta Fans ...
ELTA FANS
Air flow: 1,320 m³/h - 8,520 m³/h
... = 1.320 ÷ 8.520 Pt (kg/m²) = 13÷240 FEATURES Low pressure Industrial axial duct fans. Light alloy die cast impeller with wing profile blade. Single flange drum (duct). Direct-coupled ...
Air flow: 1,320 m³/h - 120,000 m³/h
... (m³/h) = 1320÷120000 Pt (kg/m²) = 4÷100 FEATURES Low pressure axial ducted fans. Light alloy die cast impeller with air foil profile blade. Double flange drum duct (tight). Direct-coupled motor ...
Air flow: 9,500 m³/h - 42,000 m³/h
RANGE V (m³/h) = 9500÷42000 Pt (kg/m²) = 1÷4 FEATURES Low pressure axial fan. High-efficiency low-noise structured blades impeller. Square case. Belt drive trasmission (No type: ED). Automatic shutter with centrifugal ...
Air flow: 2,050 m³/h - 23,200 m³/h
DUCT FAN TYPE - K - Fan housing is equipped with bilateral rolled flanges containing connecting holes. - Fans designed to create flow of air and other chemically inert ...
Planetfan
Air flow: 4,800 m³/h - 50,400 m³/h
DUCT FAN TYPE 2K Fan housing is equipped with bilateral rolled flanges containing connecting holes. Impellers in the two stage fans are counter-rotating. Fans ...
Planetfan
Air flow: 5,140 m³/h - 50,200 m³/h
DUCT FAN TYPE: KWR - The fan can operate in two directions of rotation while maintaining the same operational performance, namely blowing or suction. - Fans designed ...
Planetfan
Air flow: 0 ft³/min - 4,000 ft³/min
... and cost? The ENERVEX EFV Rooftop Fan makes venting easy – even if you’re dealing with multiple appliances on multiple floors, duct design challenges, or code violations. This virtually maintenance-free ...
Air flow: 0 ft³/min - 30,000 ft³/min
... these cases, an ENERVEX SFTA Air Supply Fan can be installed inline to ensure a constant supply of air. Need to further optimize performance? Add an ENERVEX EBC 31 Modulating Pressure Control to control the fan ...
Air flow: 14,680 m³/h
... reached. The housing and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. To improve aerodynamic efficiency, ...
Air flow: 3,700, 4,500, 6,000, 8,500, 10,000 m³/h
The duct fans which are designed as the motor is placed out of the air flow provide high pressure and air flow rates and by protecting the motor from temperature and other factors ensure efficiency. In ...
Air flow: 3,700, 4,500, 6,000, 8,500, 10,000 m³/h
The duct fans which are designed as the motor is placed out of the air flow provide high pressure and air flow rates and by protecting the motor from temperature and other factors ensure efficiency. In ...
Air flow: 1,206 m³/h - 1,465 m³/h
Noise level: 88 dB
... I, Groups E, F & G specifications • Pull ring switch ACCESSORIES: • 8” Heavy Duty Duct (VAC) • 8” Poly-vinyl Duct (VAC) • 8” Conductive Duct (VEP) • 8” Duct Storage Canister
COPPUS
Air flow: 0.65 m³/s
Diameter: 100 mm - 355 mm
... durable duct fan with very low noise levels, suitable for most low volume low to medium pressure ducted applications. Low noise levels Durable light weight construction Quick installation Espada ...
Air flow: 150 m³/h - 2,270 m³/h
Impeller Mixed flow for high volume flow and high pressure performance. Made of high-grade polymer. Electrical connection The spacious terminal box (IP 44) is mounted on the casing; rotatable to any position.
Helios Ventilation
Air flow: 1,000, 1,450 m³/h
Noise level: 76, 83 dB
... in medium or long ducts with a temperature of 70°C maximum. Furthermore, they are used for applications where forced ventilation or aspiration is required. Construction: Body in steel sheet with anti-corrosion epoxy ...
CORTEM
Air flow: 340 m³/h - 5,600 m³/h
Diameter: 200, 250, 315 mm
The Colasit CRDV-R plastic duct fan can be installed both horizontally and vertically in aligned pipe systems. The reliability and stability of the plastic duct fan are ...
COLASIT AG, Spiez - Switzerland
Air flow: 320, 105, 170 m³/h
Rotational speed: 2,700, 2,550, 1,420 rpm
Noise level: 43, 37, 29 dB
... 11 E - short description Duct-mounted fan for installation in folded spiral-seams ducts, DN 100 ECA 11 E: •Suitable for DN 100 ducts. •With VDE GS symbol. •Duct-mounted ...
MAICO Ventilatoren
Air flow: 95 m³/h - 350 m³/h
For ventilation of small enclosures with short ducts. Applications: The T are designed to be inserted between the suction grid and the air outlet. Ideal for short tube installations.
FNP Group
Air flow: 500, 1,000, 1,600 m³/h
Diameter: 200, 250, 300 mm
Noise level: 18 dB - 69 dB
The CLASSIC | CLC-P axial duct fan is designed for indoor use. Provides fresh air supply. It can be used in air ducts or as a part of other air-handling systems. Technical Specifications Integrated ...
2VV s.r.o.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining