- Hydraulics - Pneumatics >
- Valve >
- Knife gate valve >
- EBRO
EBRO knife gate valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 300 mm
Pressure: 0 Pa
Temperature: 20 °C - 150 °C
Parallel Seal Slit Valve for High Vacuum • Long service life: 3 million cycles. • Low particle generation: Reduced by 1/5 or more. • Replaceable bellows. • Mechanical end lock. • Air consumption reduced by 22%.
DN: 137 mm - 360 mm
... self-supporting SINT engineering polymer composite cast. The blade is manufactured from carbon or stainless steel. The valve can be operated manually, pneumatically or by electric gear motor. Intermediate ...
DN: 50 mm - 1,000 mm
Pressure: 10 bar
Temperature: -10 °C - 180 °C
... In-situ valve maintenance Externally accessible gland packing, so packing rings can be replaced without removing the valve from the piping. Long service life Blade ...
... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
DN: 50 mm - 300 mm
Pressure: 10, 6 bar
Temperature: -10 °C - 120 °C
KNIFE GATE VALVE WITH STAINLESS STEEL BODY, STAINLESS STEEL GATE AND EPDM SEAT
DN: 100 mm - 400 mm
Pressure: 10 bar
Temperature: -30 °C - 200 °C
Wafer type knife gate valve for installation between flanges, from size DN 250 onwards also available as lug type execution for flanges acc. to EN 1092-1 / PN 10. Two-piece body, bidirectional ...
GEFA Processtechnik
DN: 25 mm - 100 mm
Pressure: 3.5, 1 bar
Double O-ring shaft seals (3" & 4") exchangeable (EPDM or FPM) Safety close system Full flow ¼" × 20 male thread on shaft for easy handle extension (3" & 4") Simple and maintenance free operation Seal materials - EPDM, FPM
DN: 50 mm - 150 mm
... detect an explosion and send a signal to the knife gate valve. Depending on the size, one or more gas generators are activated, which close the slide valve due to the ...
DN: 50 mm - 500 mm
... detect an explosion and send a signal to the knife gate valve. Depending on the size, one or more gas generators are activated, which close the slide valve due to the ...
Oscillating Slide Gate DMDS Bühler is a leading manufacturer of food processing and animal feed processing equipment. The Bühler oscillating slide gate DMDS is used for the discharge and feeding of free-flowing ...
Pressure: 0 bar - 10.3 bar
Temperature: 200 °F
Inflatable Seated Knife Gate Series 476 Posi-flate Inflatable Seated Knife Gate Series 476 Posi-flate Series 476 Inflatable Seated Knife Gates ...
DN: 150, 200, 250 mm
Pressure: 67 bar
... emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to ...
COMAV
Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation ...
COMAV
Knife gate valves are designed to isolate the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents ...
COMAV
DN: 50 mm - 1,200 mm
Pressure: 10, 6, 5, 4, 2 bar
The Knife Gate Valve is a uni-directional wafer valve for general industrial application.It is predominantly used in the paper and pulp chemical industries ...
DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar
... technology The nominal widths available for the knife gate valves range from DN50 to DN600 with flange connections complying with EN 1092 PN10 or alternatively, ANSI B16.5 (class 150). Actuators ...
DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar
The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). ...
Knife gate valves Knife gate valves are characterized by an interior blade that rises and falls by means of a shank. ...
... manufacturing all the components and parts of knife gate valves since 1983. This type of valve is our most traditional product and the one for which we began to receive ...
DN: 50 mm - 1,200 mm
Pressure: 10 bar
STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTIL IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES FEATURES FIG. 51-51M-51E-51EM MATERIALS BODY CAST ...
DN: 50 mm - 400 mm
Pressure: 10 bar
Through Conduit Knife Gate Valve Maker: Through Conduit Gate Valves with Pneumatic Actuator or Handwheel, PN10, DN50-DN400, Class 150 LB, 2-16 Inch.
DN: 50 mm - 1,200 mm
Pressure: 10 bar
Bi-directional Bevel Gear Knife Gate Valve Manufacturer: Bidirectional Ductile Iron GG40 Knife Gate Valves with Bevel Gear, PN10, DN50-DN1200, ...
DN: 2 in - 48 in
Pressure: 25 bar
Temperature: -29 °C - 650 °C
... normal when the temperature is -29-650°C. The knife-type gate valve has a shearing function, which can scrape off the adhesive on the sealing surface and automatically remove debris. ...
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
... section Reliable shut-off of the medium due to robust seat sealing system Very short positioning times compared to simple knife gate vakves OPERATION DETAILS When in its closed position, the flap ...
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
... medium due to robust seat sealing system Very short positioning times compared to simple shut-off valves Compact and cost-efficient solution – only one valve instead of two conventional ones OPERATION DETAILS
DN: 900 mm
Pressure: 0.5 bar
Temperature: 300 °C
... Reliable shut-off of the medium due to robust seat sealing system Very short operating times compared to simple shut-off valves OPERATION DETAILS When in its closed position, the flap plate is pressed onto the flap ...
Dredge Gate Valve FEATURES: The dredge valve is designed in such a way that there are no fasteners inside the body Dredge valve is made of fabricated high tensile steel ...
The VGP slide valves are valves designed for heavy and particularly stressful applications. They are normally installed under hoppers, silos and tanks. Driven by pneumatic actuators, the run of ...
DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C
... plants Surface drainage Suspended solids treatment Tank cleaning Waste water Waste water transport Water Design Knife gate valve to DIN/EN with wafer-type single-piece or two-piece ...
DN: 40 mm - 300 mm
Pressure: 1 MPa
Temperature: 450, 150 °C
... cylinder rod drives the valve plate to move downward and the valve closes. When the air source enters from the lower intake port, the cylinder rod drives the valve plate to move upward ...
DN: 50 mm - 600 mm
Pressure: 10 bar
Resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via electric actuator. Suitable ...
VAG-Group
DN: 80 mm - 1,500 mm
Pressure: 6.9 bar
Temperature: 200 °C
The Clarkson KGA slurry knife gate valves feature heavy-duty, full port elastomer sleeves offering the ultimate isolation against heavy slurries • Mining • Power • Pulp and paper • ...
Pentair Valves & Controls
DN: 50 mm - 110 mm
Pressure: 3.5 bar
... offers a wide variety in PVC-U valves for different applications and some very specific uses: Rotary disc valves for the flow change in an installation. Drain valves for tanks ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining