Elma I/O cards
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
4HP Rear I/O interface for a 6U CompactPCI CP6002, CP6003, CP6004, CP6005, CP6006 & CP6016 card Specifications Single slot (4HP) Connectors for 2 local SATA disks up to -40 to +85°C, ...
The PCIe‑6320 offers analog input, digital I/O, and four 32‑bit counters/timers for PWM, encoder, frequency, event counting, and more. The device delivers high-performance functionality leveraging the high-throughput ...
NATIONAL INSTRUMENTS
4-Port x4 PCIe interface to support a total bandwidth of 1GB/s Supports four (PoE4) independent GigE Ports Compliant with IEEE 802.3af Single maximum power consumption 23.5W Internal DC 12V Power Input External DC 19-36V Power Input
CompactPCI® Interface with Digital Inputs and Outputs • 16 inputs 24 V • 16 outputs 24 V, 250 mA • All inputs and outputs electrically isolated Outputs with Short Circuit and Overload Protection • Error detection ...
... DAQ board with 8 digital I/O and two 16-bit analog outputs PCI-based 16-channel, 12-bit, 200 kS/s DAQ board with 32 digital I/O and two 12-bit analog outputs PCI-based 64-channel, 16-bit, 100 kS/s DAQ ...
Measurement Computing
... and 8/16 digital inputs, 24 V. 7/15 inputs are interruptible. The board is especially suited for applications like industrial I/O control, signal switching, alarm monitoring, as interface to machines, for the ON/OFF monitoring ...
ADDI-DATA
The PCI relay board APCI-2200 has 8/16 electromechanical relays with change-over contacts and 8 digital inputs, 24 V. Each relay can be configured as opening contact, closing contact or change-over contact. The maximum switching voltage ...
ADDI-DATA
The PCI analog I/O board APCI-3120 has 16 SE/8 differential inputs, 16-bit, 8/4 analog outputs, 14-bit, and 8 digital I/O, 24 V. The board is especially suited for applications in the sector of industrial ...
ADDI-DATA
ASi-5 PCB Module, 70 mm x 40 mm, up to 16 digital inputs, up to 16 digital outputs, input voltage/sensor supply out of AUX, output voltage/actuator supply out of AUX, max. 350 mA per output, periphery connection via wiring pins, straight, ...
Bihl+Wiedemann GmbH
Standard I/O board with digital inputs/outputs and analogue inputs/outputs 6DI,DO,2AI,1AO,+10Vr,+24V
Convertwell Oy Ab
IO board, 1 x RO (NO/NC), 1 x TI (thermistor input) Relay board with two relay outputs and one thermistor input
Convertwell Oy Ab
3 DI encoder (RS-422) + 2 DI (qualifier & fast input) Encoder input board with programmable control voltage for an encoder.
Convertwell Oy Ab
... available on the platform. Custom DAC modules, or digital I/O cards with custom logic levels can easily be accommodated within the available breadboard space. The SMP7000-xx provides access to 96 digital ...
24-channel digital I/O ISA multifunction board w/analog input/output (replaces RTI-820) Features For ISA computers Up to 64 Analog Input Channels (Dependent on Interface Panel Used) 12-bit resolution, ...
UEI - United Electronic Industries
Panel I/O – Processor and Multifunction I/O Board with 16 A/D, 2 D/A, 20 DIO, One I2C and One RS-232/422/485 Port Features Compact board level size (4.5" x 8.5" x 0.75") Compatible with ...
UEI - United Electronic Industries
... analog and digital I/O boards for use in UEI’s Cube/RACKtangle/FLATRACK I/O chassis respectively. The board offers a powerful combination of I/O including 16 single-ended/8 differential ...
UEI - United Electronic Industries
... requires a single slot on a PC/104-plus stack. As a result, the stack can then be expanded with a further three PC/104-Plus cards. Buyers can choose from a range of interfaces different mechanical versions, permitting ...
... /2-SC Digital Inputs 12 Counter and encoder functions 4 Digital Inputs with additional functions Digital Outputs 8 Digital I/O 4 Analogue Inputs 2 CANbus 1 for communication by contact line (spec, driver)
The M11 mezzanine card is a TTL I/O M-Module with 16 lines (Ports A and B) that can be used separately as two ports with 8 bits each or together as a 16-bit port. Control of the I/O lines ...
MEN Mikro Elektronik
The mezzanine card M28 with its open-emitter outputs can be used in process I/O applications (cf. M27 with open-collector outputs). If there are currents of above 500mA an intelligent power switch guarantees ...
MEN Mikro Elektronik
... on the M-Module ANSI mezzanine standard. It can be used as an I/O extension in any type of bus system, i.e. CPCI, VME or on any type of stand-alone SBC. Appropriate M-Module carrier cards in 3U, 6U ...
MEN Mikro Elektronik
PCE-D132A-SN is a 48/32-Ch. high-density isolated digital input/output card. It is an advanced-performance data acquisition card based on PCI Express bus architecture. It is suitable for most industrial ...
PCE-D122IS-SN is a 32/32-Ch. high-density isolated digital input/output card. It is an advanced-performance data acquisition card based on PCI Express bus architecture. It is suitable for most industrial ...
The Astronics 1260-14 Digital I/O Switch Card provides 96 open collector channels in 12 groups of eight bits each. With the open collector version each independent group can utilize a separate internal ...
This product is a PCI bus-compliant interface board used to provide a digital signal I/O function on a PC. This product can input and output digital signals at 12 - 24VDC. PIO-64/64L(PCI)H features 64 ...
... For use with Net2 triggers and actions feature About - The Net2 I/O board consists of 4 inputs and 4 outputs. It connects directly to a LAN/WAN via an onboard RJ45 connector. I/O boards can be distributed ...
... large number of serial I/O ports. Each channel supports RS-232, RS-485, and RS-422 electrical levels to interface to a wide variety of serial communications devices such as modems, data collection equipment, and distributed ...
... physical layer • CANopen DS-301 V4.01 application layer A PC board-mounting card for adding I/O to a CAN distributed control network. The CAN-IPM-01 combines configurable digital I/O ...
The system comprises of 12 relay containing make and brake contacts. It also has 8 transistors for outputs and provides over voltage protection. It has a output current of 24V/2A or 48V/1A with a galvanic isolation of 1500Vrms. The ...
Syslogic GmbH
The 8012e Low Profile PCI Express digital interface provides eight optically isolated inputs and eight Reed relay outputs (SPST). The isolated inputs are non-polarized and rated for 3-30 VDC. Optical isolation protects the PC and other ...
The IA-3125-U2i is an 48 channels Positive Logic Digital I/O board with 24 Solid-State Output channels that are capable of Driving 0.7 Amps per channel. This board includes a refreshing Positive Logic both on its inputs ...
Intelligent-Appliance
... INPUT 4 analog INPUT (12 bit) for potentiometers 24 24V INPUT (pushbuttons) 8 24V 0,5A OUTPUT (lamps) 16+16 I/O 5V for custom membrane pushbutton panel (pushbuttons and Led)
D.Electron
MPNC100 is a board for industrial automation with digital and analog inputs and outputs . The board interfaces with PLC or HMI devices through a CANopen bus. The board, DIN rail mountable and 24Vac or DC powered , is equipped with ...
2 Hard wired inputs Strobe and bell connections 1 PGM The input/output board for the Enforcer control panel support an RS485 data bus, 1 PGM, strobe and bell connections and 2 hard wired inputs. When the RIX2-WE is connected ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining