- Machine-tools >
- Cutting Tool >
- Steel milling cutter >
- EMUGE FRANKEN
EMUGE FRANKEN steel milling cutters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter : 8 mm - 32 mm
Length: 20 mm - 40 mm
... deep cavities Specialist for hard machining of steels up to 63 HRC Areas of application: Mould and die marking, aerospace and energy industries For steel, stainless ...
Walter Tools
Diameter : 25 mm - 160 mm
Length: 35 mm - 63.5 mm
— High level of stability — ideal for small machining allowances and variable conditions — Maximum feeds, tool life and productivity thanks to small indexable inserts and high number of teeth — High level of process ...
Walter Tools
Diameter : 7.4 mm - 102.2 mm
Length: 30 mm - 63 mm
... CVD-coated grades (WKP25S and WKP35S) for steel and cast iron machining 3 PVD-coated grades (WKK25S, WSM35S and WSP45S) for steel and cast iron machining, for machining ...
Walter Tools
Diameter : 0.2 mm - 1 mm
... difficult-to-machine materials. Two material-specific cutting-edge geometries are available: geometry S for stainless steels, structural steels, cast iron, non-ferrous metals and titanium ...
Mikron Machining
Diameter : 0.3 mm - 6.35 mm
... in the milling of stainless steel, titanium, chromium-cobalt-alloys and superalloys. The newly designed roughing and finishing cutter improves current results many ...
Mikron Machining
Diameter : 1 mm - 8 mm
... which Mikron Tool developed specially for rough and finish milling of stainless steels, titanium, super alloys and CrCo alloys. It is also very well adapted for other materials such ...
Mikron Machining
Diameter : 0.1 mm - 12 mm
Length: 45 mm - 140 mm
Carbide end mill with WXL coating For hardened steels up to 52 HRC 2 flutes, long neck, square
OSG
Diameter : 50 mm - 80 mm
Cutter and insert design optimized for finishing operations with high quality surface demands. High precision ground inserts and cutter body tolerances give consistent performance and part quality. Cutters ...
Sandvik Coromant
... design of the less 100 diameter tool which improved chip evacuation on and prevent chip sticky; ●Positive axial rake Angle, cutting smoothly; ●The reasonable design of position(forced) area and gap area of the main ...
OKE Precision Cutting Tools Co., Ltd.
... The insertsof ON05 and ON09 are ableto dothe maximum cutting depth of 3.2mm and 5.5mm respectively • - 16 cutting edges, excellent economy; • - Curved edge design, Perfect chip shape, brisk cutting • ...
OKE Precision Cutting Tools Co., Ltd.
Diameter : 12 mm - 20 mm
BXKT_Beeze series multiple function square shoulder milling tools Suitable for a variety of milling processing; Micro shape design of cutting edge with drum shape modification; Main ...
OKE Precision Cutting Tools Co., Ltd.
Diameter : 6.3 mm - 20.5 mm
... countersink results Net weight 0.5 kg Technical data Number of cutting edges - 3 Coating - TiAlN coating Shaft - 3-way clamping surface Cutting direction - right hand cutting Form ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 6.3 mm - 20.5 mm
... deburring countersinkers Net weight 0.5 kg Technical data Number of cutting edges - 3 Coating - TiN coating Shaft - 3-way clamping surface Cutting direction - right hand cutting
RUKO GmbH Präzisionswerkzeuge
Diameter : 4.3 mm - 40 mm
Length: 40 mm - 80 mm
... deep-ground flutes the cutting edges are extremely sharp. Ideal for burr- and chatter-free deburring and countersinking. Best results at low cutting speeds. Net weight 0.016 kg Shaft diameter 4.00 ...
RUKO GmbH Präzisionswerkzeuge
Diameter : 16 mm - 80 mm
Length: 28, 50 mm
... mini is suitable for numerous applications in dry and wet milling of steel, cast steel and cast iron, stainless and rust-resistant steels, alloyed and ...
LMT Tools
Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm
... low-vibration premium tools: 25 % added machining volume is the result of different helix angles in connection with newly developed, stable front cutting edges and peripheral teeth. Additionally, the ...
LMT Tools
Diameter : 1 mm - 20 mm
Length: 40 mm - 126 mm
The smallest vibrations during milling have a big impact on surface quality. That’s why the experts at LMT FETTE decided to optimize the cutting edges of the DHC Premium. The result is an extremely smooth-running ...
LMT Tools
... Aluminum Alloy-Steel”double matal design,the aluminum center reduces the weight,while the hardened steel outer ring increases the rigidity speed and feeds The double metal ...
Beijing Worldia Diamond Tools Co., Ltd
... Aluminum Alloy-Steel”double matal design,the aluminum center reduces the weight,while the hardened steel outer ring increases the rigidity speed and feeds The double metal ...
Beijing Worldia Diamond Tools Co., Ltd
APPLICATIONS Worldia PCBN Face Milling Cutter with indexable inserts used for finishing on end milling of cast iron,it can satisfy the demand for surface roughness and geometric toklerances. ...
Beijing Worldia Diamond Tools Co., Ltd
Diameter : 0.8 mm - 20 mm
Length: 39 mm - 135 mm
... Thread Cutter. This tool is remarkable for the versatility of its field of application. For machining abrasive materials, the VHM Thread Cutter with anti-wear coating is recommended. ...
DC SWISS SA
Diameter : 1 mm - 6 mm
Length: 39, 51 mm
... Thread Cutter. This tool is remarkable for the versatility of its field of application. For machining abrasive materials, the VHM Thread Cutter with anti-wear coating is recommended. ...
DC SWISS SA
Diameter : 14.5, 18.5 mm
Length: 90 mm
... Thread Cutter. This tool is remarkable for the versatility of its field of application. For machining abrasive materials, the VHM Thread Cutter with anti-wear coating is recommended. ...
DC SWISS SA
... -HA-TiCN solid carbide thread milling cutters Machining of internal thread Product features and benefits: Short machining time thanks to more flutes deep threads ...
EMUGE-FRANKEN
... -HB-TiCN solid carbide thread milling cutters with countersinking step Machining of countersunk chamfer or internal thread Product features and benefits: Short machining ...
EMUGE-FRANKEN
... details thread orientation: internal basic version: ZGF - circular thread milling cutter type: circular thread milling cutter coolant supply: IKZ coating: TICN cutting ...
EMUGE-FRANKEN
Diameter : 3 mm - 16 mm
Length: 37 mm - 75 mm
Rotational speed: 18,000, 10,000, 36,000, 30,000, 24,000 rpm
... materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its ...
PFERD
Diameter : 0.5 mm - 2 mm
Length: 50 mm
Objective: Material optimized tool program for the high demands of machining of all steels used in tool and mold making regardless if PM-steel or hardened tool-steel ...
Hufschmied Zerspanungssysteme GmbH
Diameter : 3.2 mm - 8 mm
Length: 50 mm - 80 mm
... quarter circle concave mill 4 edged milling cutter straight fluted. Recommended applications: steel, cast iron, stainless steel. Acceptable applications: ...
DueCi SRL
Diameter : 2 mm - 30 mm
Length: 40 mm - 104 mm
Universal end mills 4 flutes center cutting. Recommended applications: steel, cast iron. Acceptable applications: non ferrous, hardened steels < 50 HRC, super alloys-titanium. This product can be ...
DueCi SRL
Diameter : 6 mm - 18 mm
Length: 80, 100, 60, 70 mm
Roughing end mills 4 flutes center cutting. Recommended applications: steel, cast iron. Acceptable applications: stainless steel, hardened steels 50 HCR, super alloys-titanium. ...
DueCi SRL
Diameter : 12 mm
Length: 70, 73 mm
RBS.1012D Diamond cut: Ideal for: cast iron, cast steel, mild steel, hardened steel, low-alloy steel, high-alloy steel, heat-treated steel, ...
Euroboor
Diameter : 10, 9.5 mm
Length: 65, 70 mm
RBS.1010D Diamond cut: Ideal for: cast iron, uncured steel, hardened steel, low-alloy steel, high-alloy steel, heat-treated steel, stainless ...
Euroboor
Diameter : 12 mm
Length: 70, 73 mm
RBS.1012 Uni/Double cut: Ideal for: cast iron, uncured steel, low-alloy steel, stainless steel, brass, bronze/copper. This 10-piece set includes: - RB.B1206 o Burr ...
Euroboor
Diameter : 40 mm - 80 mm
Length: 40 mm - 50 mm
SMOXH Cutting Tools offers you quality, time, and cost savings simultaneously. Our tools, constantly updated with innovations every day, guarantee that quality doesn't have to come at a high price
SMOXH CUTTING TOOLS
Diameter : 40 mm - 125 mm
Length: 40 mm - 63 mm
SMOXH Cutting Tools offers you quality, time, and cost savings simultaneously. Our tools, constantly updated with innovations every day, guarantee that quality doesn't have to come at a high price
SMOXH CUTTING TOOLS
Diameter : 40 mm - 100 mm
Length: 40 mm - 50 mm
SMOXH Cutting Tools offers you quality, time, and cost savings simultaneously. Our tools, constantly updated with innovations every day, guarantee that quality doesn't have to come at a high price
SMOXH CUTTING TOOLS
Diameter : 0.3 mm - 2 mm
... tools which are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials (such as high speed steel, ...
Shanghai Nagoya Precision Tools Co., Ltd.
Diameter : 1 mm - 3 mm
... nitride (CBN) cylindrical tools which are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials ...
Shanghai Nagoya Precision Tools Co., Ltd.
Diameter : 0.2 mm - 3 mm
... nitride (CBN) cylindrical tools which are used for machining high hardened iron-based materials (such as super-hard steel, wear-resistant cast iron, die steel, etc.) and special materials ...
Shanghai Nagoya Precision Tools Co., Ltd.
Diameter : 2 mm - 12 mm
Length: 74 mm - 120 mm
4 Flutes corner radius end mill unequal flute spacing Steel < 1300 n/mm² Hardened and Tempered Steel 35 ÷ 45 HRC Hardened and Tempered Steel 45 ÷ 55 HRC Hardened and Tempered Steel ...
SILMAX
Diameter : 0.3 mm - 3 mm
Length: 38 mm
We offer a wide range of precision tools in the field of micro machining. Standard or special, our micro-mill bits have the latest technological developments: variable and asymmetrical helix angle, irregular indexes, surface treatments, ...
Eskenazi
Diameter : 1 mm - 12 mm
Length: 38 mm - 73 mm
... sectors such as the automobile, the aeronautics or for the manufacture of injection moulds. We also have saw cutters for various cutting work.
Eskenazi
Diameter : 0.3 mm - 3 mm
Length: 38 mm
We offer a wide range of precision tools in the field of micro machining. Standard or special, our micro-mill bits have the latest technological developments: variable and asymmetrical helix angle, irregular indexes, surface treatments, ...
Eskenazi
Rotational speed: 500 rpm
... and / or deburring holes, using chamfer bits with straight shank type DIN 334 – 335 or similar. They can use bits for steel, aluminium, wood, plastic and be employed in any application. The model with straight shank ...
Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm
IZAR CUTTING TOOLS S.A.L.
... The 2-piece design with easy screw connection allows long overhang. Toolholders accept standard Carmex thread milling inserts. Variety of steel extensions are available.
Carmex Precision Tools
The Inox range has a specially designed geometry to suit growing market demands for stainless steel applications.
ATA Group
Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm
Carmon
Diameter : 6 mm - 20 mm
Length: 57 mm - 104 mm
Carmon
Diameter : 3 mm - 32 mm
Length: 52 mm - 133 mm
Carmon
... geometries to support operations in a wide range of materials. Geometry F is for stainless steels, super alloys and low carbon steels, geometry M for steels and stainless ...
Dormer Pramet
Diameter : 12, 16, 10, 8 mm
Length: 84, 73, 105, 64 mm
Standard Guhring standard Coolant without type of hole both on shank DIN 6535-HA from-to G1/8 - G2
GÜHRING
Diameter : 6 mm - 20 mm
Length: 48 mm - 125 mm
Thread milling cutters for ISO metric threads Materials Al Si cast alloysAl wrought alloysAluminium and Al-alloysBrass, long-chippingBrass, short-chippingCast iron DuroplasticsThermoplastics
GÜHRING
Diameter : 8 mm - 20 mm
Length: 64 mm - 105 mm
Thread milling cutters for ISO metric threads Materials Al Si cast alloysAl wrought alloysAluminium and Al-alloysBrass, long-chippingBrass, short-chippingCast iron DuroplasticsThermoplastics
GÜHRING
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining