- Materials - Tools - Components >
- Standard Mechanical Component >
- Rivet >
- Essentra Components
Essentra Components rivets
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Body diameter: 3, 5 mm
Length: 4 mm - 14 mm
... an increased interlock as well as reduced rivet load. Your benefits - Avoidance/minimisation of cracking on the button side - Reduced rivet load due to an optional cup - Increased interlock of ...
The RIVTAC® technology is perfectly suitable for joints made up of aluminium, steel, plastics, materials with no iron, mixed joints, several layered and hybrid joints.
Head diameter: 3 mm - 6 mm
... joining ultra-high-strength steels and ductile materials. For this purpose, the fastener geometry has been optimised and the rivet hardness adapted. Böllhoff realises stable joints using materials of tensile strengths ...
... -bearing thread bodies to thin-walled components while providing vibration and noise damping effects. The removable blind rivet fastener consists of a threaded metal insert coated with an elastomer or thermoplastic elastomer.
BOLLHOFF
RIVTAC® joins diverse materials in record-breaking time. Position, set tack, done. And repeat. RIVTAC® allows joining without pre-punching in very short cycle times. Even if the component is only accessible from one side.
BOLLHOFF
... RIVQUICK® blind rivets, thin-walled components can be joined non-detachably. For years, the blind rivet technology has proven to be a reliable method for the non-detachable joining of thin-walled components ...
BOLLHOFF
Body diameter: 4.8, 7.9, 9.5, 3.2 mm
Length: 4 mm - 39 mm
Head diameter: 5.5, 6.4, 7.9, 9.5 mm
Southco Drive Rivets are easy to install – just insert in hole and drive pin flush to top of rivet with hammer or pneumatic tool. Pin forces prongs of rivet to flare out below or within ...
Body diameter: 5.5 mm
Length: 12 mm
Head diameter: 9.4 mm
Canoe Clips provide a fast and economical way to assemble and secure multiple materials together. A tool-free assembly - simply snap the clip into the round panel hole, and apply downward pressure with your thumb to the head of the clip. ...
Essentra Components
Length: 4 mm - 280 mm
Head diameter: 2.4 mm - 7.8 mm
... steel, copper steel and many more. The rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. These ...
RIVIT
Length: 7 mm - 20 mm
Head diameter: 3.2, 4, 4.8 mm
Aluminium body. Long steel mandrel. Dome head. Long mandrel about 45 mm.
RIVIT
Length: 6 mm - 18 mm
Head diameter: 3.2, 4, 4.8 mm
RIVIT
Body diameter: 4.8 mm
Min. and max. grip range: 2 mm - 4.5 mm
Hole diameter: 4.8 mm
Blind Rivets "Standard" "STANDARD" Countersunk Head 120° (~DIN EN ISO 15982), Body Material: Aluminium, Mandrel Material: Aluminium Length (mm) - 8,0 Clamping range min. - 2,0 Clamping range max. - 4,5 Packaging ...
Goebel Group
Body diameter: 6 mm
Min. and max. grip range: 2.5 mm - 4.5 mm
Hole diameter: 6 mm
Blind Rivets STANDARD Blind Rivets "STANDARD" Domed Head (~DIN EN ISO 15979), Body Material: Steel Zinc Plated, Mandrel Material: Steel zinc Plated More Information Packaging - Goebel Material mandrel ...
Goebel Group
Body diameter: 5 mm
Min. and max. grip range: 15 mm - 20 mm
Hole diameter: 5 mm
Blind Rivets STANDARD Blind Rivets "STANDARD" Countersunk Head 120° (~DIN EN ISO 15984) with Grooved Mandrel, Body Material: Stainless Steel A2, Mandrel Material: Stainless Steel A2 Packaging - Goebel Material ...
Goebel Group
The multi-grip Avex® rivet is a flagship product in the Avdel® rivet portfolio due to its high levels of quality and reliability achieved through decades of manufacturing expertise. The Avex® aluminum ...
STANLEY Engineered Fastening
Body diameter: 3.17, 2, 1.5, 2.5 mm
Rivets made of molybdenum are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop (Mo rivets)
Body diameter: 4 mm
Contents: 100 blind rivets. They all are made of alu/steel: 4 mm Ø x 6, x 8, x 12 Perfect for do-it-yourself at home. Check out our blind rivet nut DIY products too.
SFS Group Germany GmbH
Body diameter: 4.8, 4, 3.2 mm
Min. and max. grip range: 1 mm - 16 mm
Length: 6 mm - 21 mm
... the hole tolerances. The GESIPA CAP ® blind rivet – The structure For technical reasons, the rivet mandrel of the GESIPA CAP® blind rivet must be fi xed in the rivet ...
SFS Group Germany GmbH
Body diameter: 6.4, 4.8 mm
Min. and max. grip range: 2 mm - 16 mm
Head diameter: 12.7, 9.5 mm
... capability • Flush removal on the setting head without sharp edges GESIPA® MEGA GRIP® is a high-strength structural blind rivet that is designed for particularly complex connections.
SFS Group Germany GmbH
Body diameter: 3, 4.5, 6.5 mm
Length: 9, 10, 15 mm
Plastic expansion rivets for the quick installation of components, e.g. cable ducts. Assembly tool BNW is optimally adjusted to the fixing rivets. Only this tool brings out the full economical effect ...
Body diameter: 2.4 mm - 6.4 mm
Min. and max. grip range: 0.5 mm - 65 mm
Length: 4 mm - 70 mm
BLIND RIVETS ALUMINIUM / STEEL ZINC PLATED - DOME HEAD
FIXI
Body diameter: 2.5 mm - 5 mm
Head diameter: 2.4, 3, 3.2, 4, 4.8 mm
BLIND RIVETS ALUMINIUM / STEEL ZINC PLATED - COUNTERSUNK HEAD
FIXI
Body diameter: 3.3 mm - 5 mm
Head diameter: 3.2, 4, 4.8 mm
BLIND RIVETS ALUMINIUM / STEEL ZINC PLATED - LARGE HEAD
FIXI
Stainless Steel Capstan Rivets is design to maintain their integrity over time at high temperatures, use for insulation blanket.
Panozzo S.r.l. offers the best solutions in the field of plastic closure caps at lower prices. The wide range of products we provide our customers with can be found in our catalogue. Thanks to our experience in the field of plastic closures, ...
PANOZZO
Body diameter: 5, 6, 7, 8 mm
Length: 10 mm - 14 mm
Head diameter: 12 mm - 20 mm
Plastic rivets and fasteners provide numerous methods for fastening or fixing multiple components together. PANOZZO SRL provide a variety of easy application fasteners, from push rivets and screw rivets, ...
PANOZZO
Length: 5 mm - 18 mm
Rivets and fasteners provide numerous methods for fastening or fixing multiple components together. Push rivets are one of the easier application among fasteners or fixing components.
PANOZZO
Body diameter: 2.8 mm - 9.4 mm
Head diameter: 7.1 mm - 20 mm
"Easy assembly by thumb pressure! The rivets provide a cheap way to fasten metal, plastic, timber and other thin-walled materials. Resistant to vibrations, abrasion and corrosion. Reusable! Can also be used as a plug or cap."
emico
Body diameter: 3, 4 mm
Head diameter: 5.7 mm - 18 mm
For a quick rivet connection with blind assembly. By assembling larger quantities we recommend to use a rivetting tool, type 112 (see dimension G).
emico
"These rivets can be brought into the right position with one turn. No tools required! Mountable by the press of a finger."
emico
... multi-range blind rivet with specially embossed rivet shaft has a number of outstanding functional properties such as a large clamping range, excellent bore filling properties and positive locking of ...
HONSEL-Group
FERO®-BULB – The Strong HONSEL FERO®-BULB blind rivets have been among the high-strength blind rivet types used in large quantities particularly in motor vehicle construction for many years. They guarantee ...
HONSEL-Group
... blind rivets are the high-quality connecting element for a vast array of industrial applications where particular attention is paid to the safety factor. Thanks to its design, the rivet is able to take ...
HONSEL-Group
Body diameter: 6, 4, 5, 2, 3 mm
Length: 4 mm - 50 mm
Head diameter: 5.2, 3.5, 10.5, 8.8, 7 mm
Lederer
Body diameter: 3.2, 4, 4.8 mm
Head diameter: 8, 9.5, 6.5 mm
GORIVET is DEGOMETALs standard rivet. It is made in a variety of materials and via different methods. Ranging mechanical properties are achieved through a combination of materials and rivet diameters. Features ...
DEGOMETAL
Body diameter: 3, 3.2, 3.8, 4.8 mm
Head diameter: 6, 9.5, 5, 6.5, 8 mm
GORIVET is DEGOMETALs standard rivet. It is made in a variety of materials and via different methods. Ranging mechanical properties are achieved through a combination of materials and rivet diameters. Features ...
DEGOMETAL
Body diameter: 3.2, 3.8 mm
Head diameter: 8, 6.5 mm
GORIVET is DEGOMETALs standard rivet. It is made in a variety of materials and via different methods. Ranging mechanical properties are achieved through a combination of materials and rivet diameters. Features ...
DEGOMETAL
... that they optimize the strength of your assemblies. Our range of fasteners includes metal or plastic U-shaped clips, plastic rivets, magnetic fasteners and exterior trim fasteners designed to fit the geometry of each ...
Body diameter: 3.2, 4.8, 4 mm
Length: 6 mm - 18 mm
Rivet RS blue zinc plated coating is made of high quality aluminium Applications Metal profiles
Body diameter: 1.6 mm - 15 mm
Min. and max. grip range: 0.97 mm - 15.3 mm
Hole diameter: 2, 10 mm
Tubular rivets are standardized in accordance with DIN 7340. In contrast to hollow rivets produced by deep drawing processes, the inner and outer contours of tubular rivets are cylindrical. In ...
Body diameter: 6.3, 3.2 mm
Hole diameter: 2, 3.8 mm
Molveno fasteners manufactures and distributes Rivets in a wide range of versions. We are able to meet any needs of installation and application.
Body diameter: 3.2, 4 mm
Length: 4 mm - 19 mm
Head diameter: 5.5 mm - 7.9 mm
... - Drive Rivets Create high-strength "permanent" bonding of diverse materials such as metal, wood and masonry, in through-hole and blind-hole applications, with affordable Southco Drive Rivets. Easy ...
These push-in rivets are made using nylon 66 (PA 66) materials and comes available in a group 019 assortment box. It can either be black or natural in color and can easily be assembled using a series 112 hand tool. This ...
Skiffy
Body diameter: 4.8, 4, 3.2 mm
Length: 15, 10, 11 mm
Head diameter: 3.2 mm - 14.5 mm
For the attachment of duct fixing angles and brackets on air ducts and spiral-seam tubes respectively Advantages Blind rivet with large surface in order to secure various materials No surface damaging after riveting No ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining