- Hydraulics - Pneumatics >
- Valve >
- Hot water valve >
- Festo Process
Festo Process hot water valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.375 in - 2.5 in
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 130 °C
... rate Low fluid resistance Versions available that prevent water-hammering effects Compliant with Directive PED 2014/68/EU Sectors and applications: Textile - Water treatment - Stream ...
DN: 15 mm - 150 mm
Pressure: 40, 25, 16 bar
Temperature: -60 °C - 450 °C
... chemical industry, power plant technology Medium:Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc.
ARI-Armaturen
DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C
The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C
The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the ...
Schubert & Salzer Control Systems GmbH
DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C
This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled ...
Schubert & Salzer Control Systems GmbH
DN: 8 mm - 100 mm
Pressure: 0 bar - 63 bar
Temperature: -20 °C - 200 °C
2-way, 2-way manual or 3-way: the stainless steel ball valve VZBE controls various media, in both process automation and industrial automation. • 2-way manual, with lockable hand lever • 2- and 3-way with ISO 5211 ...
DN: 25 mm - 200 mm
Pressure: 10, 16, 6 bar
Temperature: -10 °C - 130 °C
... , the valve rotates 90 degrees from fully open to fully closed, and provides tight close-off with superior leakage performance. V5421 is a resilient seat valve with an elastomer liner and stainless steel ...
DN: 15 mm - 350 mm
Pressure: 25 bar
Temperature: -10 °C - 350 °C
Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable valve ...
DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C
The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 25 ...
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...
... controlled electric actuated ball valve for application in water, hot water, air, aggressive fluid, food, gas, oil, steam and other areas. The TORK-REA 4o and TORK-REA ...
SMS-TORK
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C
... T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, ...
SMS-TORK
DN: 50 mm - 300 mm
Pressure: 6 bar - 10 bar
Temperature: 90 °C
Application : Liquid, air, water, hot water, steam, acid Type No : PAV 812.1...DA / PAV 812.1…SR Actuator : RA…DA Double Acting Actuators/ RA…SR Single Acting Actuators On Request ...
SMS-TORK
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 140 °C
... ball valve to control the flow of hot and cold water and Glykol solutions (max. 50%) in HVAC systems conjunction with a rotary actuator Technical data Valve Flow disc ...
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed ...
AIRTEC Pneumatic
DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C
– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...
DN: 10 mm - 50 mm
Pressure: 4.2 bar - 8 bar
Temperature: -20 °C - 80 °C
... FKM. This ball valve is characterized by its high resistance to hot water and wet steam measuring up to +130 °C. It is also susceptible to petrol diesel, kerosene and acids. – Various lines for flexible ...
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The actuator features anti water hammer that allows fluid to pass below the seat and an optical position indicator. Its body is made of stainless steel and its corrosion resistant. The rotation is possible up to 360 degrees, ...
ODE
DN: 1 in
Pressure: 2.8 bar
Temperature: 29 °C
... Operation After water flow is activated at the shower or eyewash, the outlet water temperature will reach 85°F (29°C) when hot water arrives at the mixing valve. ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... full bore • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Field of application • Industrial plants • Sewage ...
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment ...
DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at ...
DN: 0.5 in - 3 in
... compact size and is ideal in hot/chilled water units such as, fan coil units, water source heat pumps, reheat coils, panel coils, small branch lines, unit heaters, unit ventilators, finned ...
Watts Water Technologies
DN: 15 mm - 50 mm
Pressure: 0 bar - 132 bar
Temperature: -46 °C - 400 °C
3 piece metal seated ball valve, for high temperature and clean services, in stainless stell or carbon stell, with lever or actuator, SW, BW, NPT, class 800Lbs
DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 130 °C
... the GAMMA membrane valve allows advantageous membrane support in both end positions. The optimum heat dissipation of the open membrane, which is in contact with the housing, reduces the thermal load. This makes the GAMMA ...
DN: 15 mm - 54 mm
Pressure: 16 bar - 40 bar
Temperature: -15 °C - 120 °C
... 1057 and it is suitable for cold and hot water, drinking water distribution, industrial and civil heating installation (see schedule A). Operation devices: aluminium lever, aluminium ...
EFFEBI
DN: 32, 40, 50 mm
Pressure: 16 bar
Temperature: -10 °C - 180 °C
... Visual position indicator • Dampened closing anti-water hammer design (fluid under seat) • Stainless Steel actuator housing for exceptional durability in steam and aggressive applications • Valves ...
Parker Fluid and climate Controls Europe
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on carbon ...
Mival
DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C
2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The ...
A. u. K. Müller
DN: 15 mm - 80 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 185 °C
... steel full bore ball valve of 3-piece design for steam, water and air. Benefits and Features High Cost Performance Ratio Long Service Life All stainless steel for excellent resistance to rust, ...
TLV Euro Engineering
DN: 1.5 in - 2.5 in
Pressure: 41.4 bar
Temperature: 400 °F
The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, ...
NIBCO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining