Ganter metal feet

Diameter: 25 mm - 60 mm

... supplied assembled to the base. - LX-SST: AISI 304 stainless steel threaded stem. - LX-SST-S: AISI 304 stainless steel threaded stem, base with screwdriver slot. - LX-AS-SST: AISI 304 stainless steel ...

Diameter: 25, 32, 40, 50, 60 mm

Levelling feet, steel or stainless steel base and stem LM.: zinc-plated steel base and ball joint with threaded blind hole. zinc-plated steel base and ball joint with threaded stem and nut. LM-SST: AISI 303 ...

Diameter: 25 mm - 50 mm

BASE Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. ARTICULATED STEM Threaded zinc-plated steel with regulation hexagon. STANDARD EXECUTIONS - LS.A: without no-slip disk. - LS.A-AS: with ...

Diameter: 40 mm - 119 mm

Levelling sets GN 360 are used for levelling and to compensate for any slope when setting up machines and systems. The fine thread allows precise adjustment and readjustment. The levelling sets are available with or without lock ...

Diameter: 24, 12, 18 mm

Stainless steel leveling elements GN 355.2 are used for levelling and adjustment in machines and equipment. They consist of a leveling screw, a socket cap screw with disk and a spherical washer. The leveling screw ...

Diameter: 50, 60 mm

Stainless steel leveling feet GN 6311.6 are used for installing and leveling devices and equipment. The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the screw can be turned ...

Load capacity: 400 kg - 2,500 kg
Diameter: 40 mm - 125 mm

Spherical zinc plated steel stud. Material Black thermoplastic, glass fiber reinforced base, mat.

Load capacity: 1,200 kg - 2,500 kg
Diameter: 80, 125, 100 mm

Spherical zinc plated steel stud. Material Black thermoplastic, glass fiber reinforced base, mat. Antislip of rubber, hardness 85 5 Shore A.

Diameter: 6 mm - 24 mm

... height of the swivel foot is calculated from the length of the threaded spindle + height of the hexagon + 22.5 mm. (Swivel foot total height = L + L1 + 22.5 mm). Depending on version, the threaded ...

Diameter: 35 mm - 180 mm

Material: Metal parts, steel, grade 5.6. Natural rubber, hardness Shore 40 or 60 A. Version: Steel electro zinc-plated.Note:The cup elements are highly elastic both in radial and in axial direction and therefore ...

Diameter: 6 mm - 20 mm

Material:Form A,G: Foot high carbon steel, ball element free-cutting steel. Form B: All stainless steel Form C: Foot POM, ball element free-cutting steel. Form D: Foot ...

Leveling foot M12x85x44 For compensating irregularities in the floor up to 5° Fully assembled spindle and base plate Profile finishing: thread in central hole Product attributes - Profile slot - ...

Diameter: 58 mm

Leveling foot M12x85x58 For compensating irregularities in the floor up to 5° Fully assembled spindle and base plate Profile finishing: thread in central hole Product attributes - Profile slot - ...

Leveling foot M16x145x90 For compensating irregularities in the floor up to 5° Fully assembled spindle and base plate Profile finishing: thread in central hole Product attributes - Profile slot ...

Diameter: 25 mm - 60 mm

Load capacity: 1,632 kg - 2,855 kg
Diameter: 50 mm - 100 mm

Load capacity: 1,400 kg - 2,800 kg
Diameter: 60 mm - 125 mm

Load capacity: 0 kg - 900 kg

... fixed adjustable foot - hinged adjustable foot function: - screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) - levelable - swiveling - anti-slip ...

Load capacity: 0 kg - 600 kg

... floor with different versions: Optionally with screw holes in the plate Plate with extende base Base plate for safe subsequent mounting threaded rod: Material: steel / stainless steel ...

Load capacity: 1,000 kg - 2,000 kg

A leveling foot for slightly uneven floors, conductive, with nut DIN 439 (ISO 4035) form B Material Base: Zinc plated steel Threaded rod: Zinc plated steel Pack Quantity 10 pieces

Diameter: 4 mm - 6 mm

Description Material: Tool steel. Version:Hardened and ground. Top face without centerbore.

... levelling feet are suitable for tables and lighter installations. The foot height is adjusted by turning the base nut by hand or spanner. The pins on the top flange centre the foot and ...

Diameter: 30 mm - 50 mm

... zinc, stainless steel or plastic Material: Plate thermoplastic, die-cast zinc or stainless steel 1.4305. Anti-slip plate thermoplastic elastomer. Version: Thermoplastic ...

Load capacity: 102 kg - 3,059 kg
Diameter: 51 mm - 132 mm

The economical, stainless steel AirLoc GLRI Jacmount® Adjustable Levelers are used when vibration and structure-borne noise isolation is required for machines that have suitable fastening holes in the machine foot.

Load capacity: 102 kg - 3,059 kg
Diameter: 51 mm - 132 mm

... industries. The economical, stainless steel AirLoc GLRI Jacmount® Adjustable Levelers are used when vibration and structure-borne noise isolation is required for machines that have suitable fastening holes in the machine ...

The Interlocker. For boring, milling, long-bed machines and for machines that have to be aligned extremely precisely in all spatial axes.

Load capacity: 8, 5 kg
Diameter: 35, 50 mm

Used to fix a pole on to a flat roof without the need of guy wires. The flat roof roof should be drilled, the holes plugged and the mounting stand then firmly attached with 4 bolts. It can also be

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

Support element with fine thread and base element 6425FB Body and base element, tempered steel, burnished. Spindle and bearing smooth, tempered steel, plasma-nitrided and burnished. Can be used on T-slots and grid plates by means ...

Diameter: 80 mm

Material base, rod, nut and washer in AISI 304 stainless steel, anti-slip device in black NBR rubber. State of supply depending on the version, complete with nut and washer (see table). Characteristics: model with linear design ...

Use: to be fitted on the 25x25x1.2 stainless steel tube. Material base in reinforced polyamide, anti-slip material in thermoplastic elastomer, stainless steel rod, reinforced polyamide cap. State of ...

Load capacity: 1,200, 1,400, 1,800, 2,000 kg
Diameter: 65, 90 mm

LAA-100 Series Aluminum Alloy Base Level Adjuster ​Material : Base-Aluminum Alloy ; Screw-Steel Or Stainless Steel ​ Ordering Instructions LAA-100- □□ - □□ - □□ ...

Load capacity: 600, 800 kg

... Series Nylon Base Level Adjuster LAN-101-2 Series Nylon Base Level Adjuster ​​Material : Base-Nylon ; Screw-Steel Or Stainless Steel Ordering Instructions LAN-101-2- □ - □□ - □□□ ...

Load capacity: 400 kg - 650 kg
Diameter: 30 mm - 58 mm

Stainless Steel Covered Feet Our Stainless Steel Covered Adjustable Feet are manufactured from high quality materials including a Polypropylene base, Zinc plated Steel thread and a Stainless Steel ...

... the size of choice, which in some cases is up to 760kg per foot. Why Choose Our Pozi Base Adjustable Feet? Manufactured using high quality materials including Polyamide & Stainless Steel Comes ...

Load capacity: 400 kg - 550 kg
Diameter: 30 mm - 58 mm

... thread, these can be carefully adjusted after their initial installation to ensure a level application once load bearing. Each foot is available with either a fixed or articulating (also known as swivel) base, with the ...

507 Zn Articulated feet/ 560 Stainless steel Articulated feet

Diameter: 25, 30 mm

... for a number of different industrial fields, including the pharma sector, the steel and iron industry, the high precision metal working sector, and many others such as the refrigeration industry and the food sector.

Diameter: 50 mm - 140 mm

... part with FDA certificate according to FDA CFR 21 177 2600. Base plate material description: Stainless steel Aisi 304 or Aisi 316 Spindle material description: Stainless steel ...

Diameter: 120, 80, 100, 60 mm

... part with FDA certificate according to FDA CFR 21 177 2600. Base plate material description: Stainless steel Aisi 304 or Aisi 316 Spindle material description: Stainless steel ...

Diameter: 120, 80, 100, 60 mm

... part with FDA certificate according to FDA CFR 21 177 2600. Base plate material description: Stainless steel Aisi 304 or Aisi 316 Spindle material description: Stainless steel ...

Load capacity: 1,500 kg
Diameter: 113 mm

Diameter: 100 mm

Diameter: 80 mm

... can be supplied in other different sizes and in stainless steel versions, so as to meet the needs of traditional carpentry or other modular construction systems. max static load 7000 N A2 stainless steel ...

Diameter: 60 mm

... sections of the profiles present in the range; however, the same accessories can be supplied in other different sizes and in stainless steel versions, so as to meet the needs of traditional carpentry or other modular ...

Diameter: 113 mm

... can be supplied in other different sizes and in stainless steel versions, so as to meet the needs of traditional carpentry or other modular construction systems. max static load 15000 N A2 stainless steel ...

Diameter: 15 mm - 55 mm

■ The surface treatment and finish allows the feet to exhibit a polished and luxurious feel. ■ Non-slip NBR O-ring is present on the underside of the feet. ■ Suitable for use in audio devices. Available in both internal and external ...

Diameter: 40, 50, 100 mm

Swivel foot with ESD-capable Anti-Slip-PlateMaterial: Swivel foot: stainless steel Anti-Slip-Plate: ESD-capable rubberColor: Swivel foot: silver glossy Anti-Slip-Plate: ...

Diameter: 60 mm

Swivel foot with integrated cross recess for faster installation Material: zinc-plated steel Color: galvanized Packaging Unit: 10 pcs.

Hexagon, with zinc-plated metal screw. M8 M10, PE black

Appropriate for mounting in metal and plastic cases. Easy to fit by hand: simply push into punched or drilled holes.

Adjustable feet with stainless steel bolt. PA6 black