- Hydraulics - Pneumatics >
- Pump >
- Suction pump >
- Gardner Denver
Gardner Denver suction pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, ...
Flow: 3,000 m³/h
Pressure: 0 bar - 300 bar
Head: 0 m - 2,800 m
... working and hydrostatic pressures typical for water-injection services. Suction and discharge nozzles are integrally cast with the lower half of the case to permit disassembly of the pump and rotor removal ...
Flow: 2 m³/h - 18 m³/h
Pressure: 1 bar - 5 bar
Small pneumatic suction pumps PA The assembly of a pressure adjuster equipped with pressure gauge and of an FCL filter on the suction inlet connection of a vacuum ...
Flow: 3,000 m³/h
Pressure: 64 bar
Head: 685 m
Product Brand Flowserve Type Between Bearings Pumps SubType Single Case Pumps - Axially Split - API The UZDL is a between bearing, axially split, two-stage pump with a double ...
FLOWSERVE
Flow: 45 l/min
Pressure: 7 bar
Head: 3 m
The FLUX air-operated diaphragm pump RFM/RFML 15 is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low to high viscosity media ...
FLUX-GERÄTE GMBH
Flow: 110 l/min
Pressure: 7 bar
Head: 3 m
The FLUX air-operated diaphragm pump RFM/RFML 25 is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low to high viscosity media ...
FLUX-GERÄTE GMBH
Flow: 178 l/min
Pressure: 8 bar
Head: 6 m
The FLUX air-operated diaphragm pump FDM 25 in injection-moulded version is self-priming and protected against dry running. The pump is distinguished for its versatility and can be used for pumping low ...
FLUX-GERÄTE GMBH
Flow: 1 l/min - 200 l/min
Pressure: 2 bar - 8.3 bar
... 1” non-metallic diaphragm pumps are a versatile solution for numerous applications. Our EXP 1” models achieve flow rates of up to 53 GPM (200.6 LPM) and offer a wide array of material and porting configurations. These ...
ARO, Ingersoll Rand
Flow: 1 l/min - 696 l/min
Pressure: 2 bar - 8.3 bar
2'' EXP Non-Metallic Air Operated Diaphragm Pump PD20E-FES-PAA Conductive PVDF ARO® EXP air operated diaphragm pumps with bolted PVDF and conductive PVDF wetted parts offer best in class features ...
ARO, Ingersoll Rand
Flow: 0 l/min - 1,250 l/min
Pressure: 1 bar - 8 bar
3” metallic air operated diaphragm pump The ARO metallic 3” PX30X-XXX-XXX diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It features ...
ARO, Ingersoll Rand
Flow: 5,000 m³/h - 65,000 m³/h
Pressure: 10 bar
Head: 7 m - 33 m
Vertical tubular casing pump with open mixed flow impeller, pump intake with inlet nozzle or suction elbow, pull-out design available, discharge nozzle arranged above- or underfloor, ...
KSB S.A.S. - France
Flow: 55 m³/h
Pressure: 8 bar
Head: 80 m
• Fluid connections: 1/2” BSP • Air connection: 1/4” BSP • Max delivery head: 80 m • Max Suction Lift Dry: 5 m • Max Suction Lift Wet: 9,8 m • Max Solid passing: 3,5 mm • Noise level: 70 dB • Max ...
Length: 400 mm - 2,100 mm
Width: 400 mm - 1,800 mm
Height: 260 mm - 1,500 mm
... application mean that it is often practical to rely on extraction rather than rectification. This is exactly where the LEWA bellows pulsator comes in. A pulsating movement drives an extraction column ...
Flow: 1,020, 850 m³/h
Head: 642 m
Power: 710, 900 kW
MULTI-STAGE HORIZONTAL PUMPS One of the most complete product ranges in the sector, with over 160 different versions available. TM (end-suction), TMB (double support and side suction). ...
Flow: 230, 210 m³/h
Head: 955, 885 m
Power: 0 kW - 185 kW
RADIAL ELECTRIC PUMPS In high head applications, the compact and reliable NR 250 is the ideal pump, both compact and reliable. Suitable for lifting and supply in civil ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...
Flow: 0.01 l/min
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Pressure: 4 bar
Weight: 32.1 kg
Trolley mounted pneumatic piston pump for 180÷220 kg drums for fuel suction in accordance with ATEX directive
Pressure: 4 bar
Weight: 19.5 kg
Trolley mounted pneumatic piston pump for 30÷60 kg drums for fuel suction in accordance with ATEX directive
Flow: 5 m³/h - 40 m³/h
Pressure: 6.5, 7 bar
Head: 0 m - 50 m
... delivery head and high maximum volume flow Up to 7 m negative suction head Expandable with electronic control of pumps Wilo-HiControl 1 Design Non-self-priming peripheral pump Application ...
Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar
... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...
NETZSCH Pumps & Systems
Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar
... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...
NETZSCH Pumps & Systems
Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar
... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...
NETZSCH Pumps & Systems
Flow: 0.3 l/min
... material - PP Diaphragm material - EPDM Connection port - 3.2mm inner diameter silicone tube Pressure range - Output≥120KPa,suction≤-50KPa Rated power - <3W Rated voltage(DC) - 12V/24V Medium - Water, weak acids ...
Keyto Fluid Technology
Flow: 0.1 l/min - 8 l/min
Power: 2 W
... material - PP Diaphragm material - HNBR Connection port - 4mm inner diameter silicone tube Pressure range - Output≥120KPa,suction≤-70KPa Rated voltage(DC) - 12V,24V Medium - Water, weak acids and alkalis etc Lifetime ...
Keyto Fluid Technology
Flow: 0.1 l/min - 8 l/min
Power: 2 W
... material - PP Diaphragm material - HNBR Connection port - 4mm inner diameter silicone tube Pressure range - Output≥20KPa,suction≤-70KPa Rated voltage(DC) - 3V Medium - Air Lifetime - 500hrs(Brush motor) Safety ...
Keyto Fluid Technology
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... with a double stainless-steel bellows that ensures durability, safety and product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime ...
Flow: 15, 25, 40, 65, 110 m³/h
Pressure: 12 bar
Fluid temperature: 250 °C
... vane pumps can be dismantled without disconnecting the suction and discharge lines. Pump reassembly requires no special positioning Replacement parts are extremely competitive The ...
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: ...
Albin Pump
Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM3) - ALBIN PUMP Specifications: Flow rate: up to 126 l/h (33 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction ...
Albin Pump
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 8 bar
Head: 0 m - 60 m
... ditches and swimming pools, water extraction for irrigation and watering, aboard ships as bilge, deck wash and general service pumps. Emptying pits and throughs containing wastewater, handling fuels, ...
Flow: 0 m³/h - 7,400 m³/h
Pressure: 25 bar
Head: 140 m
The in-line DSL double suction centrifugal pump Up to 5400 m³/h (23800 US gpm) The DSL pumps are single-stage, double-suction, vertical, centrifugal pumps. ...
Flow: 0 m³/h - 730 m³/h
Pressure: 12 bar
Head: 115 m
... the pumps are suitable as: • Bilge pumps • Ballast pumps • Fire pumps • Cooling water pumps • Wash-deck pumps • Fuel pumps • ...
Flow: 1.5 m³/h
Fluid temperature: 80 °C
Width: 1,100 mm
... ™ technology combined with MAGTECH™ magnetic filtration to provide high efficiency pre-filtration. Options Automatic extraction programmer Mobile version on rolling skid Floating skimmer for variable levels Fixed ...
Flow: 16 l/min
Pressure: 20 mbar
Power: 100 W
Clean, 100% oil-free operation Corrosion-resistant Compact, quiet and reliable Small footprint Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory ...
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 0 us gal/min - 100 us gal/min
Pressure: 7 bar
Head: 70 m
... SANDPIPER 1½" S15 Non-Metallic AODD Pump provides unsurpassed fluid containment in the event a diaphragm is breached. This leak-free pump is designed to be driven by compressed air or nitrogen. Why ...
WARREN RUPP
Flow: 0 l/h - 13,000 l/h
Pressure: 0 bar - 10 bar
Fluid temperature: 0 °C - 80 °C
... combined with the latest peristaltic hose technology results in a heavy-duty pump for the most demanding applications. The EZstrip hose pump is a heavy-duty peristaltic pump with extra-large ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining