- Hydraulics - Pneumatics >
- Valve >
- Flow control valve >
- HAWE
HAWE flow control valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.125 in
Pressure: 100 bar
Temperature: 32 °F - 230 °F
The JFC-2A Threaded Flow Control has a maximum operating pressure of 150psig, a temperature range of 32 to 230 degrees Fahrenheit and a 1/8" port. This device also has 10.5scfm airflow adjustable at 100psig. ...
Clippard
Pressure: 40 psi - 150 psi
This pulse valve has a hole-to-atmosphere exhaust, a maximum of 150 PSI and 10-32 UNF ports.
Clippard
Pressure: 0 psi - 300 psi
Temperature: 32 °F - 230 °F
Flow rate: 28, 71 l/min
Panel Mount Needle Valve Notes K=knob Additional Information Air Flow 2.5 scfm@ 100 psig Max PSI 2000 psig Ports 10-32 Thread Temperature Range 32 to 230 F
Clippard
DN: 1.5 mm - 12 mm
Pressure: 1 bar - 10 bar
Temperature: 0 °C - 80 °C
... unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible ...
CAMOZZI AUTOMATION
DN: 1.5 mm - 7 mm
Pressure: 1 bar - 10 bar
Temperature: 0 °C - 60 °C
... unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible ...
CAMOZZI AUTOMATION
DN: 0.125 in - 0.5 in
Pressure: 0.5 bar - 10 bar
Temperature: 0 °C - 60 °C
... unidirectional and bidirectional flow controllers have been revised in order to decrease their dimensions and improve their flow rate characteristics. Their construction allows for easy assembly to cylinders ...
CAMOZZI AUTOMATION
DN: 15 mm - 500 mm
Pressure: 300 mbar
Temperature: 100 °C - 650 °C
Butterfly valves for adjusting the flow rate of hot air or flue gas on gas burners, prepared for attachment of an actuator IC 50, for control ratios up to 1:10, with angle-of-rotation ...
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn ...
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
Compact needle valve in aluminium housing Leak-free valve Spring loaded, non rising adjustment stem with 56-pitch thread provides smooth, non-reversing flow characteristics and 15-turn ...
DN: 3 in - 60 in
... with a high-thrust actuator, the Valtek TX3 achieves high performance throttling control in a wide range of industry applications The smart positioner makes sure the valve is always in the right,
DN: 15 mm - 200 mm
Pressure: 0 bar - 50 bar
Temperature: -60 °C - 350 °C
The pneumatic flanged sliding gate control valve type 8621 in GS3 design with integrated positioner designed according to ASME B16.34, API RP 553, API 598, ASME B31.1 and ASME B31.3 incl. flange connection ...
DN: 15 mm - 150 mm
Pressure: 0 bar - 40 bar
Temperature: -60 °C - 350 °C
Product line GS1 The adjustable sliding gate orifice type 8090 is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during ...
DN: 15 mm - 80 mm
Pressure: 0 bar - 40 bar
Temperature: -100 °C - 220 °C
Pneumatic control valve in flange design. The integrated positioner Type 8049 offers a compact design. All wetted parts are made of stainless steel. Size: DN 15 - DN 80 Pressure: ...
DN: 25 mm - 150 mm
Pressure: 363, 145, 232 psi
Temperature: 140 °C
... the valve insert can be lifted out completely •Valve design and testing according to DIN IEC 534 All stainless steel product contact parts are made of AISI 316L / DIN EN 1.4404 grade material. In ...
DN: 100 mm - 400 mm
Pressure: 0.2 bar
VFP/VFPX Butterfly Valves can be fitted beneath hoppers, bins, silos, screw or other type conveyors, or to intercept pneumatic conveying ducts. Due to their special design material residue between valve ...
WAMGROUP S.p.A
... polymer in designing the VL range makes these Slides Valves the ideal equipment for intercepting the flow of powdery or granular materials in gravity or conveying applications. VL-type Slide Valves ...
WAMGROUP S.p.A
DN: 137 mm - 360 mm
... internal valve body during operation. VDI Inclined Slide (Feeder) Valves add to the simple function of material flow by gravity interception the ability to control ...
WAMGROUP S.p.A
DN: 6 mm
Pressure: 210 bar
Temperature: -20 °C - 80 °C
Industrial hydraulic valve in a high performance range. Reliable oil flow control to command value signal. Spool valve Pilot-operated Connection diagram ...
DN: 4 mm - 23 mm
Pressure: 20, 40 bar
Temperature: -20 °C - 80 °C
Brass ball valves for low and medium pressure are used for opening and closing compressed air, water and city gas. Available in standard series, these ball valves come in a wide range of models: in-line, ...
Temperature: -10 °C - 80 °C
... Nickel brass sensor, usable on valves up to size 2 inches • for detection ON – OFF • Cable: 2m • OPTIONS (on request): • A reduction is available for sizes 2 1/2” and 3”. Construction characteristics: •High flow ...
DN: 0.125 in - 1 in
Pressure: 2.5 bar - 13 bar
Temperature: -5 °C - 50 °C
... Progressive start-up valve • Available in 4 sizes with flow rates up to 15000 Nl/min and connections from 1/8” to 1” • Suitable for downstream system gradual pressurization • Downstream circuit filling ...
DN: 42 mm - 66 mm
Pressure: 2 bar - 6 bar
Temperature: -5 °C - 70 °C
The PVV series vacuum valves are one of the most functional and efficient solutions for vacuum control, specifically designed for applications where large suction capacities is required. Thanks to the ...
Pressure: 320 bar
Flow rate: 130, 90, 60, 50 l/min
Flow control valves are a type of flow valve. They generate a set constant flow rate, largely independently of the load. The flow ...
HAWE Hydraulik SE
Pressure: 315, 320 bar
Temperature: -40 °C - 80 °C
Flow rate: 30, 120, 90, 50, 20 l/min
Proportional flow control valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled ...
HAWE Hydraulik SE
DN: 6 mm - 20 mm
Pressure: 400, 315 bar
Flow rate: 8 l/min - 80 l/min
... check valve type QR and QV combines the function of a flow valve with a check valve. It regulates in one flow direction and permits free flow ...
HAWE Hydraulik SE
DN: 0.25 in
Pressure: 50 psi - 5,000 psi
Flow rate: 0 l/h - 23 l/h
... high pressure miniature pressure compensating flow control valve is only .250” in diameter and 1.38” in length. This valve provides a constant flow rate ...
DN: 0.25, 0.375, 0.5 in
... is a line of proportional valves with pressure sensor units and digital control electronics. Valve control loop parameters can be optimized for the application ...
ASCO
DN: 150 mm - 400 mm
Pressure: 10 bar
Temperature: -10 °C - 200 °C
... close collaboration with our customers, for challenging fields of application that simply require more than a standardised valve product. This has resulted in countless variations. Many of them have been developed to ...
DN: 65 mm - 250 mm
Pressure: 3 bar
Temperature: -10 °C - 220 °C
... close collaboration with our customers, for challenging fields of application that simply require more than a standardised valve product. This has resulted in countless variations. Many of them have been developed to ...
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... All moving parts are separated from the fluid by the diaphragm. Maintenance-free. Technical Data Function: Shut off/control flow Connection type: Internal-thread connection, Flange, Butt weld ...
DN: 0.25, 0.375 in
Pressure: 700 bar
DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F
Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
... 0.8mm). About 0-1 SCFM air flow at 50psig. High Resolution Needle: 0″ to 0.032″ (0-0.8mm). About 0-1 SCFM air flow at 50 psig. This configuration is especially well suited for control ...
Beswick Engineering Co, Inc.
DN: 0 mm - 0.81 mm
Pressure: 135 psi
Flow rate: 0 ft³/h - 20 ft³/h
... Polyurethane tubing. Flow Control Range: Especially well suited for control of low flow rates. 0 to 4.2 gallons per hour (0 to 19 liters per hour) of water. ...
Beswick Engineering Co, Inc.
DN: 0.28 mm - 1.4 mm
Pressure: 0 psi - 200 psi
... orifice and check valve. The orifice meters flow in the forward direction, while the check valve permits free return flow. This valve is particularly ...
Beswick Engineering Co, Inc.
DN: 0.5 mm - 0.9 mm
Pressure: 7 bar
Temperature: -10 °C - 50 °C
DN: 1.2 mm - 1.6 mm
Pressure: 0 bar - 6 bar
Temperature: -10 °C - 50 °C
Pressure: 3 bar - 10 bar
This valve has been designed to control lubricant flow (oil and grease). Piston is made of hardened and ground steel. It is driven by a pneumatic cylinder controlled by a 4-way solenoid ...
Pressure: 3 bar - 10 bar
This valve has been designed to control lubricant flow (oil and grease). Piston is made of hardened and ground steel. It is driven by a pneumatic cylinder controlled by a solenoid valve. This ...
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... range of flow rates of liquids and gases, CV™ Utility valves are available in three conveniently overlapping orifice-needle sizes. These versatile, rugged and reliable, valves are suitable ...
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...
DN: 80 mm - 250 mm
Pressure: 10, 8 bar
Temperature: -30 °C - 180 °C
Wafer type butterfly valve for installation between flanges EN 1092, PN 10, one-piece body with centring lugs, end-to-end valve stem, flat disc design with excellent flow characteristics. The ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... precise control of the flow rate through concentric Iris® diaphragms (similar to a camera diaphragm). - Energy-saving and low-noise control valve due to its free centric ...
Pressure: 30 psi - 90 psi
Controls water flow rate when flowing pressure is between 30 and 90 psi (2.1 and 6.2 bar).
Haws AG - Headquarters for Europe, Middle East and
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining