- Electricity - Electronics >
- Electronic Component >
- DC electromechanical relay >
- HENGSTLER
HENGSTLER DC electromechanical relays
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Switching current: 50 A
The 67 Series brings power relays for use in the photovoltaic sector. These devices include the following features (according to Type): • DC coils, with only 170 mW holding power • Contact gap ≥ ...
FINDER S.p.A. con unico socio
Switching current: 10, 8, 16, 12 A
... comprises relays which include the following features (according to Type): •PCB/plug-in versions DC coils (standard or sensitive) •500 or 650 mW & AC 5.3 mm pin length 8 mm •6 kV (1.2/50 μs) isolation, ...
FINDER S.p.A. con unico socio
Switching current: 30 A
Finder’s 66 Series power relays include the following features (according to Type): • AC & DC coils • ATEX/HazLoc compliant (EX nC) option available • PCB mount or Flange mount (250 Faston) ...
FINDER S.p.A. con unico socio
Switching current: 2 A
... The TX series reconciles several benefits in different signal switching circuits. Already the standard line-up of the 2CO relay contains latching and single-side stable types, SMD or THT pins - and coil voltages covering ...
Panasonic Electric Works Europe
Switching current: 6 A
Output voltage: 48, 24, 240 V
Output current: 2 A
The ABB CR-S range of pluggable interface relays and optocouplers is used for electrical isolation, amplification and signal matching between electronic controls – PLCs, iPCs or field bus systems – and the sensor / actuator ...
ABB
Switching current: 6 A
Output voltage: 5 V - 110 V
2 contacts max. 6 A switching & permanent current Drive is monostable as DC Ambient temperature -25 to +70 °C With forcibly guided contacts to EN 50205, Application type A with 1 NOC/1NCC Application ...
HENGSTLER
Switching current: 8 A
Output voltage: 5.5 V - 110 V
... permanent current Drive is monostable as DC Ambient temperature -25 to +75 °C With forcibly guided contacts to EN 50205, application type A cULus and TÜV approval The development of this safety relay ...
HENGSTLER
Switching current: 10 A
Output voltage: 5 V - 230 V
... a monostable version either for DC or AC. In addition, the H-462 relay is available as a DC bistable version. For special applications, it is possible to quote solutions ...
HENGSTLER
Switching current: 85 A
... series makes it simple to find the right heavy-duty solenoid relay for high current loads. Select models of Continuous-Duty SPST series solenoid relays come with a PVC coating, which seals the relay ...
Switching current: 100, 225 A
Relays are commonly referred to as a remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes ...
Switching current: 600 A
... wire harness, the SD high-current automotive relay eliminates the need to route heavy copper cables directly to accessible mechanical disconnects. Cables can instead be routed directly to loads with the SD relay ...
Switching current: 10 A
This unit uses a power relay that will manage signals and protect units from noise while also alarming the user when voltage changes happen. Honeywell makes these power relays to work for power switching ...
... scheme logic FR relays. Features Type AR relays are a range of electro-mechanical relays with up to 8 contacts and complying with IEC 61850. They can be supplied ...
Switching current: 4.2 mA - 106.5 mA
... • In addition to our standard type (MY), an abundant lineup of models including latching relays that retain contact operation status (MYK) and sealed relays suitable for environments where dust and ...
Switching current: 9 mA - 167 mA
A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor • Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. • No contact chattering ...
Switching current: 3 mA - 8,000 mA
Output voltage: 5 V - 110 V
SID4, 4-pole relays with two independent contact sets with forcibly guided contacts according to IEC 61810-3 type A in environmentally friendly design. The relay drive has two independently acting magnetic ...
ELESTA GmbH
Switching current: 0.5 A
The 6 series is a fully screened relay offering low RF loss and high current carrying capacity, which was developed with RF design engineers in the radio communications industry. • Excellent RF Characteristics • Carry ...
Sensata Technologies
... applied. With coil power applied there is continuity through the relay contacts. Normally closed relays provide continuity through closed contacts until coil power is applied where the relay ...
Sensata Technologies
Single Pole Double Throw relays offer a normally open and a normally closed contact set in one relay. The moveable contact transfers continuity from one stationary contact to the other when the coil is ...
Sensata Technologies
Switching current: 25 A
Output voltage: 0 V - 440 V
... of power failure. The advantage of polarised latching relays is the pulse driven operation of some milliseconds, coil heating can be neglected. Relay can also be set by manual operation. The relays ...
GRUNER
Switching current: 5, 16 A
... disconnect, switch, or convert voltage - even where space is at a premium. Our product portfolio comprises a diversity of relay and optocoupler modules that use the practical terminal block format. Our analog transformers ...
Switching current: 2.5 A
... and logic is achieved using the relay. Bistable devices, or latching relays and mono-stable devices, or interface or switching relays are distinct from each other. Mono-stable devices ...
DOLD
Output voltage: 230 V
Output current: 1.5 A - 6 A
Width: 22.5 mm
The latching relay UG 8851 is designed with a wide AC/DC nominal voltage range. Short pulses of several miliseconds switch the relay into a defined position. To change the contact position ...
DOLD
Output current: 5 A - 10 A
The Safety Relay is a type of PCB Relay manufactured by Dold suitable for use on printed circuits. These relays are equipped with a positive guided contact, with at least one closed ...
DOLD
Switching current: 8 A
... E1K and the E3K. The E1K units function as coupling relays that has one change over contact. it has a witdth of 17.5 millimeters. It is included with yellow LED that serves as an indicator for relay ...
TELE Haase Steuergeraete GmbH
Switching current: 5 mA - 12,000 mA
The TELE RA Series are space-saving multiple contact relay. This series is usually built with in a cube shape housing. That design is the most recognizable component used in the electrical systems. The RA series are created ...
TELE Haase Steuergeraete GmbH
Switching current: 5 mA - 7,000 mA
The TELE RM Series are space-saving multiple contact relay. This series is usually built with in a cube shape housing. That design is the most recognizable component used in the electrical systems. The RM series are created ...
TELE Haase Steuergeraete GmbH
Switching current: 6 A
Force Guided Relays RF1V Series RF1V Series force guided relay have mechanically linked contacts allowing you to use in safety related circuits. Available in four or six pole models, all relays ...
Switching current: 5 mA - 8,000 mA
Output voltage: 120, 24, 250, 240 V
Output current: 0.1 A - 8 A
... 2NO; colis AC or DC; for PCB and sockets Contact data Coil data Rated power consumption :AC: 0,75 VA; DC: 0,4 ... 0,48 W General data Mechanical life (cycles) :>3 x 107 Ambient temperature ...
RELPOL
Switching current: 50 A - 500 A
Output voltage: 12 V
... machinery or in machine engineering are possible. The single-coil relays from this series are available with NO, NC and changeover contacts. Referred to the nominal voltage of 12 and 24 V, these relays ...
Layher AG
Switching current: 100 A - 300 A
Output voltage: 12, 24, 48 V
Bistable relays have been developed for a wide range of applications, such as in commercial vehicles, rail vehicles, construction machinery or in household technology. A magnet circuit with permanent magnet latching allows ...
Layher AG
Switching current: 80 A - 300 A
The relays can be expanded to include integrated or adaptable auxiliary electronics, thus enabling a wide range of additional functions.
Layher AG
Output voltage: 230 V
Output current: 0 A - 6 A
• PLC transistor output to power switching converter • common positive or negative • LED indicators for output relays coil voltage nominal voltage +10% / -15% duty cycle 100% screw tightening torque 0,6...0,8Nm operating ...
HIQUEL
Switching current: 10 A
Compact Industrial plug in relays with built in features like LED, Free wheeling Diode, Polarity Diode, RC, Bridge Rectifier, Magnetic Blow out Relay for Inductive load and Twin contacts for low switching ...
ELESTA
Relay module for large loads such as lamp loads, motors and drives for electrical isolation between logic and load. •Connection with screw-type terminals •Socket 2 storeys •Pluggable relay •With ...
Relay module for large loads such as lamp loads, motors and drives for electrical isolation between logic and load. •Connection with screw-type terminals •Socket 3 storeys •Pluggable relay •With ...
Relay module for large loads and high inrush currents such as LED lighting systems and lamp loads for electrical isolation between logic and load. •Inrush relays for large loads and high inrush currents •Connection ...
Switching current: 50 mA
Output voltage: 30, 250 V
Output current: 10 A
... range of relay types and versions and associated sockets and accessories. 35 x 35 mm round plug-in relay, 8- or 11-terminals multipole connectors with 2 or 3 contacts up to 10 A and different contact ...
Releco
Switching current: 6 A - 110 A
Output voltage: 30, 28 V
Output current: 10 A
Chordn provides various electromechanical relays in 6 different types and each with multiple sizes for extremely wide application. Our products are compatible to wide control voltage, different contact ...
Switching current: 6 A - 110 A
Output voltage: 30, 250 V
Output current: 8, 12 A
Chordn provides various electromechanical relays in 6 different types and each with multiple sizes for extremely wide application. Our products are compatible to wide control voltage, different contact ...
Switching current: 70 mA
... new high voltage relay RL 42-L needs only 1.7 watt. Technical specifications: Contacts: double pole double throw Exciter coil: 24 V DC / 0.07 A Test voltage: - Contact / exciter coil: 20,000 V DC - ...
SPS electronic
Output current: 10, 16 A
• Type of product: Miniature relays • Type of contacts: 2 C/O • Relay control voltage: 12VDC • IEC Conventional free air thermal current Ith [A]: 10 • LED state indicator: No • Mechanical actuator: No
Switching current: 200, 50, 150 A
Output voltage: 800 V
• Rated load 800 VAC/200 A breaking • Ambient temperature 85°C • High impulse withstand voltage, 10 kV • Contact gap ≥4.0 mm (Applied to VDE0126) • Low initial contact resistance ≤0.2 mΩ (when 200 A of current is applied)
OMRON Electrical Components
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining