Kendrion friction brakes
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 200,000 Nm - 27,920,000 Nm
Pneumatic disc brake as operating, parking and emergency brakes VULKAN pneumatic disc brakes are designed for light and medium heavy fields of application, in particular tension brakes ...
VULKAN Marine
Torque: 100,000 Nm - 29,100,000 Nm
Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...
VULKAN Marine
Torque: 120,000 Nm - 7,000,000 Nm
Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...
VULKAN Marine
Torque: 689.2075 Nm - 9,309.9503 Nm
Rotational speed: 2,200, 1,100 rpm
Power: 3,057 W - 10,962 W
This 16-model series of spring engaged, air released brakes are designed for heavy-duty industrial applications requiring high torque and low inertia. Intended for horizontal shaft mounting only. Dual Faced Elements have ...
Nexen Group, Inc.
Torque: 48,918, 32,540 Nm
Rotational speed: 960, 950 rpm
... disc brake technology led to the development of the Floating House Brake (FHB)—a patented braking concept that uses a floating housing instead of a floating rotor. Rated for over 430,000 lb-in of torque, ...
Airflex
Torque: 0.23 Nm - 9 Nm
Rotational speed: 4,500 rpm - 10,500 rpm
... overexcitation and power reduction. The ROBA®-servostop® Cobot is a closed-circuit, electromagnetic safety brake. When the brake is applied, a rotor disc with friction lining pads is ...
Chr. Mayr GmbH + Co. KG
Torque: 1.5 Nm - 100 Nm
Rotational speed: 3,000 rpm - 20,000 rpm
... The ROBA®-servostop® is a closed-circuit, electromagnetic safety brake. When the brake is closed, the rotor is held between the armature disk and the flange plate by the friction ...
Chr. Mayr GmbH + Co. KG
Torque: 0.31 Nm - 11.5 Nm
Rotational speed: 4,500 rpm - 21,000 rpm
... spring-applied safety brake for servomotors ✓ Slim design ✓ High power density ✓ Low energy consumption ✓ Simple assembly Slim brake for installation both in the A-bearing side and in the B-bearing ...
Chr. Mayr GmbH + Co. KG
Torque: 1.3 Nm - 4,166 Nm
... available on the market; the torque of the Extreme pneumatic brake is constant, stable and linear over time also varying the working temperature. Thanks to all these features, Extreme pneumatic brake ...
Torque: 1.2 Nm - 330 Nm
Rotational speed: 1,200 rpm - 3,000 rpm
Power: 700 W - 12,600 W
Combiflex pneumatic brakes, since 1974, have been representing the benchmark for the converting industry and most of all for corrugated machines. Mounted on the roll stand unwinders, they represent the best solution to ...
Torque: 50 Nm - 3,200 Nm
Rotational speed: 1,500 rpm - 4,150 rpm
Power: 52 W - 187 W
... coupling. Features Characteristics Electrically operated 24 or 103,5 VDC depending size Single friction face Activated by power on Utilisation Coupling of two shafts ...
WARNER ELECTRIC
Torque: 120,000 Nm - 7,000,000 Nm
Rotational speed: 700 rpm - 5,000 rpm
Electrohydraulic drum brake as operating and holding brake If the operating brake is not often required for maneuvering, an ELECTROHYDRAULIC BRAKE can be used, available ...
VULKAN Industry and Energy
Torque: 100,000 Nm - 29,910,000 Nm
Braking force: 1,110 N - 52,920 N
Electro hydraulic disc brake as operating brake for applications with a high number of movements FEHD Generation 2, the new generation of electrohydraulic brakes from VULKAN offers a ...
VULKAN Industry and Energy
Torque: 15,000 Nm - 11,545,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
VULKAN Industry and Energy
Torque: 1.5 Nm - 600 Nm
Rotational speed: 3,000 rpm - 6,000 rpm
... unique system developed by INTORQ, brakes can be assembled to fit almost any task. You benefit from the wide variety of options, fast project planning and rapid delivery. further explanation: INTORQ BFK458 Double-brake - ...
Kendrion (Villingen) GmbH
Torque: 0.24 Nm - 4 Nm
Power: 5.2 W - 12.4 W
Spring-applied brake INTORQ BFK551 Wherever there is only a very limited installation space available and a powerful brake is still required, we are sure to be “new fans”. Developed from the requirements ...
Kendrion (Villingen) GmbH
Torque: 0.27 Nm - 8 Nm
Rotational speed: 5,000, 4,000, 6,000, 3,000, 2,500 rpm
Power: 5.8 W - 27.2 W
... electromagnetic brakes are usually the method of choice. As safety brakes they bring moving masses to a stop, keep loads in position and therefore prevent humans and material assets from being affected. For ...
Kendrion (Villingen) GmbH
Torque: 400,000 Nm
“Low-speed” brake.Caliper safety disc brake direct acting at the board disc of a rope drum.Load crash security and protection ( also reacting in case of gear shaft fracture). Direct-acting / Without ...
Römer Fördertechnik GmbH / RFT
Torque: 0 Nm - 10,000 Nm
... between brake lining and brake drum) Optimal when using an automatic wear adjustment (AVN) Optionen Mechanical limit switch protection “Brake open”, “Brake close”, ...
Römer Fördertechnik GmbH / RFT
DRUM BRAKES FOR BRIDGES AND SLUICES “RIJKSWATERSTAAT” TYPE RWS About the product The RWS, also known as Rijkswaterstaat-Brake has additional features compared to a standard drum brakes ...
Römer Fördertechnik GmbH / RFT
Torque: 0 Nm - 32,000 Nm
Braking force: 36 kN
... shown on the graphs are based on fully bedded in and conditioned brake pads with a nominal friction coefficient μ = 0.4. Twiflex disc brakes must be used with Twiflex asbestos free brake ...
TWIFLEX
Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,234 N
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring ...
The Hilliard Corporation
Torque: 0 ft.lb - 6,000 ft.lb
Braking force: 14,145 N
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring ...
The Hilliard Corporation
Torque: 0 ft.lb - 18,000 ft.lb
Braking force: 37,214 N
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring ...
The Hilliard Corporation
Torque: 0.15 Nm - 20 Nm
Power: 5 W - 20 W
... , the brake engages (power-off brake engagement). The spring applied brake can be designed to be used as a holding brake (parking), or dynamically where an emergency ...
Stephenson Gobin
Torque: 0.2 Nm - 5 Nm
Rotational speed: 40 rpm - 3,000 rpm
Power: 15 W - 50 W
Electromagnetic particle output shaft brakes MEROBEL’s EMP output shaft Brakes are compact and very easy to use for applying a variable torque to a rotational system. MEROBEL’s EMP FAS – FRAS series ...
Torque: 2 Nm - 1,000 Nm
The most popular range of MEROBEL’s electric Brakes, offering tailored solutions with 10 sizes covering a range from 2Nm up to 1000Nm (nominal torque values). With 5 different versions referring to cooling options ...
Torque: 0.5 Nm - 0.7 Nm
Braking force: 300 N
... application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is only recommended to use the brake only as a holding brake and not as an emergency ...
Torque: 1.5, 0.5 Nm
Electronic brake for all NEMA23 motors The electronic brake is designed to be mounted on step- and servo motors, such as the MAC050, MAC095m, MAC140 or MAC141 series of integrated servo motors. Brake ...
Torque: 1.7, 4 Nm
... vertical linear application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is recommended to use the brake only as a holding brake and not ...
Torque: 1 Nm
Spring-applied brake, operates when no current is applied. The special design of this brake makes it suitable for static breaking. Axial play in the motor has no influence on brake ...
Dunkermotoren GmbH
Torque: 1.5 Nm
E 100A This power-on brake is available on request.
Dunkermotoren GmbH
Torque: 1.5 Nm
This power-off brake (permanent-magnet brake) is available on request. The correct polarity must be respected.
Dunkermotoren GmbH
Torque: 0.06 Nm - 3.2 Nm
Rotational speed: 6,000 rpm
... extremely compact design in combination with a constant torque to the sister model BXW. This performance was achieved by new friction lining and excitation technology. - High reliability - Ultra-thin design - Low ...
Miki Pulley Europe AG
Torque: 5 Nm - 320 Nm
Rotational speed: 2,000 rpm - 8,000 rpm
Due to the excellent responsiveness it is possible to realize fast switching processes. The optimal installation form can be selected from the three types of armature assemblies with different shapes. - Different armature options - ...
Miki Pulley Europe AG
Torque: 5 Nm - 55 Nm
Rotational speed: 3,600, 5,000 rpm
The BXR model is an emergency and holding brake. Its main feature is the slim design, which makes it a perfect solution in confined spaces. The main applications are in robotics and in servo drives. - High reliability - ...
Miki Pulley Europe AG
Agility and efficiency in a modern form New industrial brake series from RINGSPANN sets standards in design and number of switching operations The electromagnetic disc brakes of the RINGSPANN series ...
RINGSPANN
Braking force: 0 kN - 190 kN
... activated – hydraulically released Features - Code Brake Caliper - H Standard - W Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction block wear - M
RINGSPANN
Braking force: 0 kN - 270 kN
... activated – hydraulically released Features - Code Brake Caliper - H Floating caliper - S Frame size 145 - 145 Spring activated - F Hydraulically released - H Manual adjustment to accommodate friction ...
RINGSPANN
Torque: 0.3 Nm - 2 Nm
Power: 6 W - 15 W
... closed-current spring-applied brakes. This brake solution is characterised by a particularly compact construction, and is designed for small loads. The type 08 can be used as a service brake ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... current spring-applied brake, and is used in applications with tough ambient conditions around the world. The standard brake conforms to protection class IP66, with hand-release IP65. The brake ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... current spring-applied brake. It has been manufactured by KEB for over 50 years and is used throughout the world in a wide range of applications. The brake can be used both as a service brake ...
KEB Automation KG
Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 5 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00
Kählig Antriebstechnik GmbH
Torque: 0.024 Nm
Rotational speed: 5,000 rpm
Power: 6.6 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather
Kählig Antriebstechnik GmbH
Torque: 0.1 Nm
Rotational speed: 5,000 rpm
Power: 9 W
FEATURES - Electromagnetic fail-safe spring-applied brake - Chromated coil housing - Isolation class F - Protection IP00 - Optional hand breather
Kählig Antriebstechnik GmbH
Torque: 14, 29, 75, 600 Nm
... Our pneumatic brakes can be combined with all our air motors. The combination of motor with brake is widely used for winches, cranes and positioning devices. All brakes are built ...
The Nexen Ball Screw Brake is a high-torque, spring-engaged brake acting on the machined end of a ball screw. It serves as a primary or redundant safety brake to prevent back driving ...
Torque: 4 Nm - 1,600 Nm
... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...
Cantoni Motor
Torque: 4 Nm - 500 Nm
... released disk brake powered by direct current. Designed for braking rotating machine parts and their precision positioning. Utilized as safety brake. Various options of executions are at disposal with ...
Cantoni Motor
Torque: 4 Nm - 1,600 Nm
HIGH LEVEL OF SAFETY Safety considerations have required designing a braking mechanism with dual safety circuit, also 2H2SP series meet strict safety regulations related to elevator design and installation defined in EN 81-1+A3:2009 ...
Cantoni Motor
Braking force: 25,700 N
Rotational speed: 10 rps
... General Machinery Bridge and Dam Mining and Conveyors Crane and Hoist Oil and Gas FEATURES Electromagnetic Safety Disc Brake
STROMAG
Braking force: 400 N - 880,000 N
... escalators, drawworks and dam turbines. Svendborg Brake Products from Howdon Hydraulic Brakes Hydraulic Power Units Soft Braking Controls Couplings Yaw Systems Thruster Brakes ...
Howdon Torque limiters
Braking force: 21,990, 25,920 N
An active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. The BSAB brakes are multi piston Dual-Action brakes ...
Howdon Torque limiters
Braking force: 0 kN - 113 kN
... 75 is an active brake where oil pressure needs to be applied - in order to brake. There are no springs in this kind of caliper. This brake can provide clamping force up to 140,000 N. ...
Howdon Torque limiters
Torque: 0 Nm - 1,800 Nm
Handbrakes and emergency brakes with hydraulic control (negative, multi disc in oil) with output shaft, that can be applied to the motor.
SAI Motori Idraulici
Torque: 10 Nm - 50 Nm
Braking force: 290, 375 N
Ringspann's DH 010 FPM Brake Calipers sport machine mounting capabilities at right angles to the brake discs. They showcase spring-activated functions, pneumatic-release systems, and manual adjustment ...
SIAM RINGSPANN
Torque: 250 Nm - 1,700 Nm
Braking force: 2,600 N - 9,300 N
Brake Caliper DH 025 FPA Features - Mounting to the machine at right angles to the brake disc - Spring activated - Pneumatically released - Manual or automatic adjustment to counter friction ...
SIAM RINGSPANN
Torque: 4,900 Nm - 38,500 Nm
Braking force: 24,000 N - 65,000 N
... by Ringspann, and is a brake caliper that can be mounted and can be equipped in either parallel or at right phase to the brake disc. It is spring actuated and pneumatically delivered, which has a manual ...
SIAM RINGSPANN
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining