- Hydraulics - Pneumatics >
- Valve >
- Flow-control valve >
- Mival
Mival flow-control valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 50 mm - 900 mm
Pressure: 10 bar - 40 bar
The Durco Big Max BX2001 high-performance, all-purpose valve is designed for precise throttling control or on-off service with lighter weight piping systems and less expensive, energy-efficient actuators. Broad ...
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C
Combined flow regulating valve - straight through with flanges and special spindle seal eClass-No.:37010203 Application:Heating facilities, AIR conditioning facilities Medium:Water, water with cold-protection, ...
ARI-Armaturen
DN: 3, 6, 8 mm
... solution for précision flow control. TESTING The H. F and X Senes metenng bail valve designs hâve been tested for proof and burst. Every MBV - H, F & X metering valve ...
DN: 0.25, 0.5 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
... progressive starter is a valve that regulates the flow of air until the outlet pressure reaches a certain value, at which the valve opens and allows air to flow at full ...
DN: 15 mm - 250 mm
Pressure: 0 bar - 100 bar
Temperature: -60 °C - 350 °C
... line GS3 The adjustable sliding gate orifice type 8090 in reinforced version is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed ...
DN: 40 mm - 80 mm
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 220 °C
Angle seat motor valve type 7310 Highly accurate angle seat motor valve for on/off and control operation with neutral and aggressive media. A version with fail-safe option is available. ...
DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: min -200.0 °C
Product line GS3 The sliding gate manual valve for low-temperature type 8056 in reinforced version is used for cryogenic control applications down to -200°C. Media such as hydrogen, nitrogen, oxygen, ...
DN: 15, 20, 32, 25 mm
Pressure: 25 Pa
Temperature: 2 °C - 130 °C
... actuators the valves carry DIN / EN 14597 certification. 6.5mm stroke for superior modulating control. Valves are used with 300N and 400N electric actuators for a compact assembly. ...
Honeywell Environmental & Combustion Controls EMEA
DN: 25 mm - 250 mm
Pressure: 10 bar
Temperature: 140 °C
... and easy access of valves that are in lengthy or fixed pipelines. •ATEX compliant models •Designs with electro-pneumatic control (flow control) with Bürkert positioner SV1 ...
The pressure/temperature compensation control maintains the set flow rate regardless of changes in the load pressure and fluid temperature. Capable of flow rate control ...
Pressure: 0 bar - 320 bar
Temperature: -30 °C - 120 °C
Flow rate: 0 l/min - 10 l/min
M18x1.5 / M22x1.5 / G3/8 • Qmax 10 l/min (3 GPM) • pmax 320 bar (4600 PSI) Set flow rate independent of load pressure and temperature changes Adjusted flow rate depends on the orifice area ...
ARGO-HYTOS
Pressure: 315, 320 bar
Temperature: -40 °C - 80 °C
Flow rate: 30, 120, 90, 50, 20 l/min
Proportional flow control valves are a type of flow valve. They generate a constant flow rate independent of the load which can be controlled ...
DN: 0.281, 0.187 in
Pressure: 0 psi - 5,000 psi
... Metering Flow Control is 100% tested in both flow directions to ensure reliable, consistent performance. Because each direction can be specified differently, our dual metering flow ...
DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C
Introducing the RS PRO general purpose manual ball valve designed for industrial applications. Manual ball valves are used to operate shut off valves which control water ...
DN: 0.063, 0.125 in
Pressure: 8.6 bar
Metal Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when ...
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when ...
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
... you the features of a Flow Control Valve, Isolation Valve and Companion Flange. Another advantage of the Check-Trol is the minimal pressure drop, especially when compared ...
DN: 0.5 in - 12 in
Pressure: 175 psi
Temperature: 121 °C
... Certified Vermont S152 Certified ANSI/NSF-61 Annex G Compliant Calibrated Accurate Flow Control and Measurement Sizes from ½” – 12” Ball valve style ½” through 4” Globe valve ...
Pressure: 15 bar
Flow rate: 1.6 l/min
The adjusting valve is built into a junction, which is produced from an extruded light alloy aluminium bar. The device (quite simple and cheap) is particularly suitable for the distribution of oil in lubricating systems. For ...
DN: 0.08 mm
Pressure: 1 MPa
Temperature: -40 °C - 70 °C
The PV01 micro flow proportional valve is a small diameter product series of Keyto's proportional valve. With a 0.08mm internal flow path. The valve ...
DN: 0.15 mm - 1.6 mm
Pressure: 0.4, 0.7, 1 MPa
Temperature: -40 °C - 70 °C
... PV02 series proportional valve is a small diameter series in Keyto's proportional valve . With a range of flow paths from 0.15 mm to 1.6 mm. The valve is suitable for ...
DN: 2.3, 4.5 mm
Pressure: 0.1, 0.3 MPa
Temperature: -40 °C - 70 °C
... precision proportional valves, PV03 series play an important role in ventilator. With a range of flow paths from 2.3mm to 4.5mm in the spool and a maximum flow rate of 180L/min, ...
DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C
... precise control of the flow rate through concentric Iris® diaphragms (similar to a camera diaphragm). - Energy-saving and low-noise control valve due to its free centric ...
Flow rate: 23.7 l/min
Model SP248 chrome-plated brass stay-open valve with squeeze lever handle and built-in 6.25 gpm (23.7 L) flow control. 1/2" IPS inlet x 1/4" IPS outlet.
DN: 15, 25, 20, 32, 40 mm
Pressure: 0 bar - 17 bar
Temperature: 0 °C - 210 °C
These valves are designed for control the flow of steam, nitrogen and air. They guarantee highly accurate process control. The spring loaded gland packings are selfadjusting. ...
Pressure: 250 bar
Temperature: -20 °C - 80 °C
Flow rate: 6 l/min - 60 l/min
... operated flow control valves, the optimized design of the pressure compensator ensures constant speeds at the hydraulic actuator. The valves can be used as 2-way or 3-way ...
3 functions in 1, valve, speed controller and silencer. Selection and mounting are also easy.
DN: 40 mm - 300 mm
Pressure: 25, 10, 16 bar
Temperature: -29 °C - 80 °C
... Diaphragm Actuated Hydraulic Double-Chamber Control Valve for use in water distribution for pressure reducing, pressure sustaining, pressure relief, flow control, surge ...
DN: 50 mm - 900 mm
Pressure: 16 bar - 64 bar
Temperature: -29 °C - 90 °C
... Piston Actuated Hydraulic Control Valve for use in waterworks for pressure reducing, pressure sustaining, pressure relief, flow control, surge anticipation, level control ...
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder mounting type shock absorber is necessary. Two-stage ...
NIHON PISCO CO., Ltd.
DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C
Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate ...
NIHON PISCO CO., Ltd.
DN: 4, 6, 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
Orifice Flow Controller Preset Flow Control Valve (Tamper-Proof) preset flow control valve makes constant-flow ...
NIHON PISCO CO., Ltd.
DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C
... plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C
... plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar
... caliber, high pressure pipeline fluid control. This series of fixed ball valve has the function of double blocking and releasing. The top structure can realize on-line replacement of components for easy ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
Trunnion Mounted Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation: Lever Gear motor/pneumatic actuators product ...
Athena Engineering S.r.l.
DN: 50 mm - 1,200 mm
... with the latest edition of API600 and ASME B16.34. All the gate valve provided with a drain valve at the lower part of the body used for tightness control & drain.
Athena Engineering S.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining