Pico plug-in transformers

Primary voltage: 26, 115 V
Frequency: 400 Hz

Manufactured to MIL-PRF-27, Grade 5, Class S. 90º C Ambient. Regulation is 24% (T Units Have Regulation of 17%) Secondary Voltage Adjusted to Nominal Value at Half Load. Smallest Possible Size. Printed Circuit Thru Hole Construction. Secondary ...

Electric power: 200 W - 400 W
Output power kVA: 0.2 kVA - 0.4 kVA
Primary voltage: 10 V - 24 V

General Characteristics • Dimensions according to CEI-UNEL 21009 std • Manufactured and tested acc. to IEC 61869-1/2 • Rated Insulation level up to 36 kV • Frequency 50 or 60 Hz • Rated primary current (Ipr) Single primary ...

Electric power: 200 W - 400 W
Output power kVA: 0.4, 0.2 kVA
Primary voltage: 10 kV - 24 kV

... phase VT to be connected to the MV line through plug-in bushings, type A interface, protected by two MV fuses, all contained in an ≥ IP 55 metal case; the connecNon to the motor is by means of a ≥IP55 plug. ...

Output power kVA: 0.005, 0.0015, 0.0038, 0.0025 kVA
Primary voltage: 1.2 kV
Secondary voltage: 720 V

• This Winding current transformer is mostly used for new installations, as the circuit must be interrupted here. • Most cost-effective and most common variant • Currently the most compact design on the market, thus ...

Output power kVA: 0.001 kVA - 0.0075 kVA
Primary voltage: 1.2 kV
Secondary voltage: 720 V

• This clip-on current transformer is mostly used for new installations, as the circuit must be interrupted here. • Most cost-effective and most common variant • Simply plug the transformer ...

Output power kVA: 0.001, 0.0015, 0.002, 0.0025, 0.005 kVA
Primary voltage: 1.2 kV
Secondary voltage: 720 V

• This calibrated current transformer is suitable for billing purposes • The design is approved by the Physikalisch Technische Bundesanstalt (PTB) Braunschweig • This transformer is mostly used for ...

... connected to the following toroidal current transformers. They must be crossed by the cables of the line to be controlled; insert the phases and neutral if present. The earth cable must NOT cross the current transformer. NOTE: ...

Secondary voltage: 0.3 V
Primary current: 0 A - 1,000 A
Secondary current: 5 A

XH-SCT-T70 Split Core Curren Transformer CTs Specifications: 1.Rated current:0-1000A 2.Rated output:mA or mV(0.333V) or A(1A,5A） 2.Insulation Voltage:3KV 3.Rated Frequency:50HZ/60HZ 4.Operating Temperature:-15℃to ...

Secondary voltage: 0.3 V
Primary current: 0 A - 800 A
Secondary current: 5 A

FSCT40 Split Core Current Transformer CTs Specifications Window Size:40mm Input:0-800A Output:5A,1A,mA,mV,V Burden:2.5VA/5VA Wire Lead:2*2.5mm² sheathed wire Standard: GB/T 20840. 1 and . 2; Pressure Voltage: ...

Secondary voltage: 0.3 V
Primary current: 0 A - 5,000 A
Secondary current: 5 A

The JIANGYIN SPARK Busbar KN Series of split core current transformer are designed for fast and easy installation.The split core design permits non-contact current measurements through magnetic field induction without ...

Primary current: 5 A - 2,500 A

Moulded case current transformer for billing purposes Main features Moulded case current transformer for billing purposes The applicable regulations for kWh measurement devices can be fulfi lled with ...

Cable split core for retrofitting existing systems Compact, splitting current transformers for retrofi tting Ideal for retrofitting as the primary current circuit need not be disconnected Ideally suited for ...