PNR water nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Orifice diameter: 0.4 mm - 6 mm
Flow: 0.9 l/min - 155 l/min
Pressure: 3 bar - 20 bar
GE FLAT FAN NOZZLE – DISC NOZZLE In GE flat fan nozzle (thickness 1.2 mm), the spray jet is close to the turbulence structure and this special design makes them very easy to clean. ...
PNR Italia
Orifice diameter: 0.7 mm - 5.2 mm
Flow: 4.5 l/min - 268 l/min
Pressure: 80 bar - 400 bar
The water path of the nozzle orifice has been redesigned completely to reduce energy losses caused as a result of turbulence, the elimination of all sharp cross section changes has resulted in a significant ...
PNR Italia
Orifice diameter: 2 mm - 5.2 mm
Flow: 16.2 l/min - 268 l/min
Pressure: 80 bar - 400 bar
... nipple and nozzle tip assures for correct alignment of the nozzle onto the spray manifold. Several nipples length value and a specific locknut allow for a wide choice of different assembly ...
PNR Italia
... a material's height are detected and the nozzle automatically makes the required height adjustments, maintaining the necessary nozzle standoff to avoid collision with warped surfaces and protecting the ...
Orifice diameter: 0.01 in - 0.02 in
... The OMAX Vacuum Assist eliminates delay between water and garnet feed, allowing for consistent automatic piercing of composites, laminates, and other materials. • Available in a wide range of nozzle ...
Orifice diameter: 49 mm
Flow: 60.8 l/min
Pressure: 500 bar
... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...
WOMA GmbH
Orifice diameter: 40 mm
Flow: 42.9 l/min
Pressure: 800 bar
... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...
WOMA GmbH
Orifice diameter: 40 mm
Flow: 180 l/min
Pressure: 1,500 bar
... round jet with the area performance of the flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16" nozzle ...
WOMA GmbH
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
... suctioning and spraying as much fluid as possible, this atomizer is just the right one. It is ideal for scent spraying lines, water humidifying units indoors, or for direct irrigation e.g. of wood. An uncomplicated, functional ...
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... Measuring examples of suction volumes in 1 min. at 20 °C: ISOVG150 4.5 ml at 6 bar ISOVG150 2.4ml at 3 bar Water 114 ml at 6 bar Water 48 ml at 3 bar
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
"Full force ahead!" When it comes to covering a large surface from a short distance this atomizer is just the right one to use. Its compact design is ideal for tight spaces. Two stray channels provide a large spray angle and an elliptical ...
Orifice diameter: 0.15 mm - 0.6 mm
... cone spray/ Extremely fine fog and ultra-low flow rate KB series nozzles Features • Ultra-small capacity hollow cone spray nozzle with the finest atomization among hydraulic nozzles. • ...
H. IKEUCHI & CO., LTD.
Orifice diameter: 0.13 in - 3 in
... machineries, tanks, steels • Spraying: Waste water treatment, aeration, foam breaking, fire extinguishing, dust suppression, sea water desalination, etching, chemical treatment Industries in which ...
H. IKEUCHI & CO., LTD.
Orifice diameter: 0.4 mm - 0.8 mm
[Made to Order Products] Features • Full cone spray pattern with a round impact area. • Wide spray angle provides larger spray coverage. • Ideal for fire extinguishing, fire prevention, dust suppression. Applications • Fire ...
H. IKEUCHI & CO., LTD.
... manufactured by ACF®, is a blast nozzle that functions as a normal and dust free blasting that is adapted in all of the different types of blasters that is equipped with a nozzle holder. In addition, ...
Orifice diameter: 1.2 mm - 21 mm
The RA type is a hollow coned spray nozzle that generates uniformed spray dispensation. Coarse particles are reduced to a fine spray and fine droplets are eradicated. Possessing a nominal spray angle that ranges from ...
DELAVAN France
... free passageway • Self-aligning tip using the 3/4” dovetail design as the Delavan AD nozzle • 5% overlap required • Orifice in line with dovetail - no off-set required Construction and Materials • Dovetail ...
DELAVAN France
... Kit-One units with H.L. nozzles. - A universal system, in kit form, for permanent or semi-permanent siting in polythene-clad structures, under glass or on open ground. - For interconnection and initial connection from ...
DELAVAN France
Orifice diameter: 1 in
Flow: 25 l/min - 250 l/min
Pressure: 6 bar
... pattern called RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER ATTACK nozzles ...
Tipsa
Orifice diameter: 0.5 in
Flow: 25 l/min - 950 l/min
Pressure: 6 bar
... - lled RYLSTATIC®. RYLSTATIC® is a system that gives you a uniform water fog with smaller water droplets and less friction loss than other traditional systems. VIPER BLUE DEVIL nozzles ...
Tipsa
Orifice diameter: 2, 1, 1.5, 2.5 in
Flow: 19 l/min - 1,000 l/min
Pressure: 6 bar
... for a quality fog pattern. Foam: The VIPER® SG nozzle can be used as an aspirating foam nozzle with the addition of inline eductors and foam tubes. Inlet Options: The VIPER® SG selectable flow nozzles ...
Tipsa
Orifice diameter: 0.5 mm - 6 mm
Fine, uniform hollow cone spray. Applications: Cooling and cleaning of air and gas, dust control, spraying onto filters, spray drying, desuperheating.
Lechler
The newly developed MaxiSpinner 2 is similar to the Mini, Micro and NanoSpinner series in many respects. As the largest product of this series, it convinces with effective cleaning results and a reliable as well as durable bearing construction. A ...
Lechler
Orifice diameter: 1.45 mm - 2.5 mm
Quick and safe assembly, without tool. Space-saving installation. Non-clogging and maintenance-free. High resistance to temperatures and chemicals. Applications: cleaning problems, cooling process, foam control.
Lechler
Orifice diameter: 0.38 in - 1 in
Lanza adjustable suitable for irrigation and watering with deferentesd angulosde jet cleaning.
Orifice diameter: 0.38 in - 1 in
Piton fixed irrigation suitable for irrigation and direct stream cleanups
INDUSTRIAL SPRAY NOZZLES - FLAT SPRAY SPRAY CHARACTERISTICS Wide flat spray of liquid with even distribution except for the edges which have heavier deposit. Wide spray angles, on water, ...
DELAVAN SPRAY TECHNOLOGIES
SPRAY CHARACTERISTICS Wide flat spray of liquid with even distribution except for the edges which have heavier deposit. Wide spray angles with water, at low pressure. Useful with steam or air for ...
DELAVAN SPRAY TECHNOLOGIES
INDUSTRIAL SPRAY NOZZLES - SPECIAL PURPOSE Spray Nozzles & Showers For the Pulp & Paper Industry Design Features The type MCN is a cone spray nozzle available in a variety of spray ...
DELAVAN SPRAY TECHNOLOGIES
... one forward jet and blind plug (interchangeable) included, the General is a perfect nozzle for preventative maintenance and all-around sewer cleaning. Two different water jet angles - 15 and 25 degrees ...
INTERSEWER UG (haftungsbeschränkt)
... specially designed water jet angle in conjunction with reduced pres- sure eliminates effectively the blowing of toilets. Technical Specifications: Optimized Hydro Mechanics Replaceable, threaded stainless steel nozzle ...
INTERSEWER UG (haftungsbeschränkt)
The Black Blaster is an exceptional nozzle and a great alternative to a stainless steel nozzle. This nozzle offers high cleaning efficiency. Advantages: Relatively inexpensive Can be ...
INTERSEWER UG (haftungsbeschränkt)
Orifice diameter: 85 mm
Flow: 50 l/min - 118.3 l/min
Pressure: 1 bar - 4 bar
Wash fluid enters a drive chamber creating a disc of moving water. The wash fluid exits the unit through the small number of slots in the external disc. The specially designed pattern of slots ensures the high energy ...
Flow: 0 m³/s - 0.02 m³/s
Pressure: 3 bar - 12 bar
Media temperature: 0 °C - 140 °C
... effective cleaning performance and superior self-cleaning features Cost efficient and sustainable solution due to reduced water and chemicals requirements More available production time because of reduced cleaning time Easy ...
Orifice diameter: 5.3 mm - 11.5 mm
Flow: 6.72 us gal/min - 69.7 us gal/min
Pressure: 50, 75, 100, 125, 150 psi
AFF FLAT FAN FIRE PROTECTION NOZZLES FM Approved Nozzles for Water Mist and Offshore Fire Suppression DESIGN FEATURES One-piece construction Clog-resistant All 1/2" AFF NPT ...
BETE
Flow: 1.6 l/h - 3.4 l/h
Pressure: 3 bar - 14 bar
Media temperature: 5 °C - 10 °C
This plastic misting nozzle is equipped with a non blocking filter inside that makes the nozzle a longer life, and it is anti-drop designed so that the nozzle will not drip when the pressure ...
DaYu Water-saving Group Co.,Ltd.
Flow: 0.05 l/min - 4,720 l/min
Pressure: 0 psi - 500 psi
VeeJet nozzles are ideal for applications such as cleaning, rinsing, cooling, pressure washing and surface preparation. Our spraying technology experts can help you customize a nozzle for your specific ...
Spraying Systems Co.
Flow: 30 l/min - 200 l/min
Pressure: 1,000, 1,600 bar
In 1973, URACA was the first company in the world to launch a 3-D cleaning head. It revolutionized cleaning of the interior of tanks and enabled efficient and automatic cleaning of reactors, tanks and autoclaves without the need for people ...
URACA GmbH & Co.KG
The TANKO-S Spate cleaner proves an effective cleaning device for superior hygienic cleaning of tanks or vessels. The device has been in use for several decades and is well enhanced to ensure best cleaning results, product safety and ...
By using diamond water jet nozzle, water stream width can be minimized and directness and ultrahigh pressure achieved, resulting in higher precision and longer life. Furthermore, by expanding ...
... spray cone 90° is available with centric or rectangular spray image. The blockage-resistant nozzle provides extremely even atomisation even with fluctuating liquid pressure. The swirl unit is firmly ...
Düsen-Schlick GmbH
FOAM/RINSE/DISINFECTION NOZZLE Stainless steel nozzles with ST3100 Nipple
Spiral nozzle inject water into a spiral extrude orifice. Different from ordinary nozzle, spray pattern of spiral nozzle is not a complete cone, it's a uneven spray pattern ...
The BEX F Spray Nozzles are designed to create a flat spray arrangement which yields spray angles of 0° to 110° at 40 psi. These spray nozzles are manufactured with various knobs that provide a more convenient ...
BEX
Flow: 40, 24, 50 l/min
Pressure: 10 bar - 280 bar
Media temperature: 150, 90 °C
... various sectors. Our spare parts warehouse stocked course enables our dealers around the world to be able to attend most of the water jet also those made by our competitors.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining