- Power Transmission - Mechanical components >
- Bearing and Linear Guide >
- Sprag one-way clutch >
- RINGSPANN
RINGSPANN sprag one-way clutches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 29 Nm - 260 Nm
Diameter: 15 mm - 40 mm
Rotational speed: 900 rpm - 3,600 rpm
... Features ・Compact Design BB Series functions both as an one-way clutch and a bearing within its compact body, allowing you to use your space more effectively. ・Easy mounting You can choose two ways ...
Tsubakimoto Chain
Torque: 70 Nm - 2,300 Nm
Diameter: 25 mm - 110 mm
Rotational speed: 160 rpm - 600 rpm
Compatible with medium loads and easy to install. Allows for a compact design. The ML Series has a cam and roller structure, and various transmission parts can be easily mounted. Suitable for low to mid-speed and middle load applications. Features ・Uses ...
Tsubakimoto Chain
Torque: 6,760 Nm - 980,000 Nm
Diameter: 60 mm - 465 mm
Rotational speed: 80 rpm - 300 rpm
... multi temperature grease for wide temperature range Ambient temperature range: -40°C to +65°C(-40°F to +149°F) 3.Ingenious backstop mechanism ・Non-rollover cam ・Cam & roller cage for longer life at overrunning 4.The ...
Tsubakimoto Chain
Torque: 100 Nm - 42,500 Nm
Rotational speed: 210 rpm - 20,000 rpm
Nonreturn devices for high speeds VULKAN nonreturn devices are some of the best and most cost-effective products of their kind and can carry out several functions fully automatically, without working with mechanical or hydraulic auxiliaries. ...
Torque: 62 Nm - 578,000 Nm
Rotational speed: 95 rpm - 7,000 rpm
High speed and low speed backstop with sprag lift off and roller ramps design. Available either with or without radial support bearings and a reaction torque arm. (Area of) Applications High speed ...
Torque: 110 Nm - 31,000 Nm
Diameter: 20 mm - 155 mm
Rotational speed: 96 rad.min-1 - 5,000 rad.min-1
for bolting to the face with sprag lift-off X Application as Backstop Overrunning Clutch For application as backstop in installations with high ...
RINGSPANN
Torque: 220 Nm - 25,000 Nm
Diameter: 20 mm - 155 mm
Rotational speed: 630 rad.min-1 - 2,600 rad.min-1
for bolting to the face with sprags, available in three types Application as Backstop Overrunning Clutch Indexing Freewheel Features Integrated ...
RINGSPANN
Torque: 45 Nm - 160,000 Nm
Diameter: 12 mm - 300 mm
Rotational speed: 400 rad.min-1 - 5,500 rad.min-1
for bolting to the face with sprags, available in four types Application as Backstop Overrunning Clutch Indexing Freewheel Features Complete ...
RINGSPANN
Torque: 373 Nm - 33,900 Nm
Diameter: 15 mm - 160 mm
Rotational speed: 0 rpm - 3,600 rpm
... , pulleys, etc. Four types of clutch are offered MG Series - Standard clutch for general overrunning, backstop and index applications, standard oil lubricated with option of grease. MI ...
Cross & Morse
Torque: 54 Nm - 2,440 Nm
Diameter: 50.8 mm - 114.3 mm
Rotational speed: 300 rpm - 1,800 rpm
PB Sprag Clutches feature precision formed sprags for maximum torque capacities combined with long life. The clutches have an outer race designed to simply attach sprockets, gears or pulleys with a plain ...
Cross & Morse
Torque: 2 Nm - 140 Nm
Diameter: 8 mm - 72 mm
Rotational speed: 1,900 rpm - 15,000 rpm
... within the clutch. A precision ground alloy steel Inner Race. A moulded Nylon Sprag Cage to equally space the Sprags. Heavy duty Garter Spring located within the Sprag ...
Cross & Morse
Diameter: 0 in - 20 in
... problem of drive reversal a Renold Sprag Clutch holdback is fitted to the conveyor headshaft and held with a torque arm against stops fitted to the framework of the conveyor. Aggregates Industry Renold ...
Torque: 210 Nm - 27,500 Nm
Diameter: 0.5 in - 15 in
Rotational speed: 350 rpm - 3,600 rpm
The FR series by Ringspann is is full face one way clutch used for bolting the face in inch dimension with sprags. This is a sealed sprag freewheel ...
SIAM RINGSPANN
Torque: 230 Nm - 2,500 Nm
Diameter: 20 mm - 85 mm
Rotational speed: 90 rpm - 500 rpm
with lever arm with sprags and grease lubrication Features Complete Freewheels FA with lever arm are sprag freewheels with sleeve bearings. They are grease-lubricated ...
SIAM RINGSPANN
Torque: 3,750 ft.lb - 900,000 ft.lb
Diameter: 3.44 mm - 21 mm
Rotational speed: 100 rpm - 620 rpm
The FRHD is a seal sprag freewheel with ball bearings. It has a nominal torque of up to 900, 000 lb/ft. The FRHD is designed for use as backstops for applications that require low ...
SIAM RINGSPANN
Torque: 94 Nm - 543 Nm
Diameter: 15 mm - 60 mm
Rotational speed: 1,000 rpm - 2,000 rpm
... pre-lubricated with sealing rings. All GMN complete freewheel clutch units can be used as indexing clutches, backstops or as overrunning clutches. The freewheel clutches ...
Torque: 43.2 Nm - 835 Nm
Diameter: 16.51 mm - 56.09 mm
Rotational speed: 220 rpm - 2,650 rpm
Type CB-200 is a sprag type free wheel not self-centring. It is therefore necessary to place one or two bearings next to the free wheel so that the outer race can rotate centrally to the inner race. The ...
C.T.S.
Torque: 55, 93, 130 Nm
Diameter: 52, 62, 47 mm
Rotational speed: 4,200, 6,000, 5,200 rpm
The CKN series is a freewheel incorporating a 62.. series bearing, self-centring, grease-lubricated and comes with water protection This model is equipped with a keyway on the inner race and should be fitted on k6 tolerance ...
C.T.S.
Torque: 210 Nm - 3,230 Nm
Diameter: 25 mm - 80 mm
Rotational speed: 700 rpm - 4,600 rpm
... a high reduction of heat due to oil movement and friction between sealing rings. Each freewheel is supplied with paper gaskets (without paper gaskets, the freewheel can be seriously damaged).
C.T.S.
-Advanced design technology, ensure products bear high impact. -Special process for products, master the knowhow -High precision and quality control to improve the service life -Using the strengthened material ...
Torque: 63 Nm - 4,875 Nm
Diameter: 50 mm - 186 mm
Rotational speed: 0 rpm - 8,600 rpm
... bearing support is ideal for use in operations where axial and loads are needed together with lubrication and sealing. The sprag space tolerance of the model should not go beyond when any bearing clearances or mounting ...
STIEBER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining