SIKO in-line indicators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
The new S15L Pro Series In-Line Status Indicator helps operators see machine and equipment status quicker with distinct, multicolor indication. It is enabled with Modbus control for use in Snap Signal ...
The S15L Series In-Line Sensor Status Indicator is an ideal accessory in industries that require highly visible indication, such as automotive, material handling, and general assembly. Two-color ...
BASE AND CASE High-resistance polyamide based (PA) technopolymer. Black base. Case in the following colours: - C2: RAL 2004 orange, glossy finish. - C3: RAL 7035 grey, glossy finish. Available on request in RAL 7021 grey-black colour ...
ELESA
BASE AND CASE High-resistance polyamide based (PA) technopolymer. Black base. Case in the following colours: - C2: RAL 2004 orange, glossy finish. - C3: RAL 7035 grey, glossy finish. Available on request in RAL 7021 grey-black colour ...
ELESA
BASE AND CASE High-resistance polyamide based (PA) technopolymer. Black base. Case in the following colours: - C2: RAL 2004 orange, glossy finish. - C3: RAL 7035 grey, glossy finish. - C1: RAL 7021 grey-black, glossy finish. The ...
ELESA
Digital position indicator DA09S Basic device with 5 decades Profile DA09S: Most-used size in slim design Hollow shaft, max. Ø 20 mm Counter with 5 decades and fine reading Display can be designed for “mm” or “inch” Magnifying ...
SIKO GmbH
Digital position indicator DA02 Very small design Profile DA02: Ultra-small design Hollow shaft with max. Ø of 10 mm Minimum axle base of 19 mm Counter can be designed for “mm” or “inch” Stainless-steel driving ...
SIKO GmbH
Digital position indicator DA04 Basic device with 4 decades Profile DA04: Hollow shaft, max. Ø 14 mm Counter with 4 decades and fine reading Detent as an option Magnifying function for good readability Stainless-steel ...
SIKO GmbH
The DTI-1000 digital temperature indicator is a fully traceable thermometer recommended as the reference instrument to verify the true temperature of any type of temperature calibrator, liquid bath or dry-block calibrator. ...
●Measuring input Pt100 -100.0..+600.0 °C Pt1000 -50.0..+200.0 °C ●LED-Display 14.2 mm red, indicating range ±9999(0) Digit ●Max. 2 alarm outputs, relay SPDT ●Analog output 0/4..20 mA, 0/2..10 V ●Field case with snap lid, 2 x M16x1.5 Characteristics The ...
Mechanical flow indicator, for fluid media, with rotor for quantitative flow display. The rotor turns in proportion to the flow. ●Simple flow display ●Rotatable connections ●Removable connections thanks to clip-fitting ...
... dial are major advantages, while the digital position indicators allow direct reading of the input measurement values at a glance. Next, the spindle rotation value can be selected and the indicator values ...
Propeller controls Zinc plated brass body Pyrex glass tube Threads BSP Designed to control the circulation of liquids, they are suitable for the flow of water, oils, petrol, gas oil and all other liquids except corrosive liquids. - ...
Connection: G ½ ... 3, ½" ... 3" NPT, DN15 ... DN200, ANSI ½" ... 8" Material: carbon steel, stainless steel, PVC, PP, PVDF pmax: 40 bar tmax: 260 °C Visual internals: rotor, ball, flap, chain
Display range -9.999...+9.999 freely scalable Trip amplifier for external sensors (pressure, temperature, level etc.) Digital display 4 switching outputs and 1 analog output Accuracy class 0.2% f.s. Applications OEM-applications, ...
Barksdale
This is a 3 digit indicator to adjust and directly read a motion (or an angle) obtained by a drive shaft rotation, particularly suitable for little adjustments in small spaces. Shock-proof, self extinguishing technopolymer. ...
FIAMA
The PMS-620N from Aplisens can be used for assisting transmitters with a standard input current and voltage signals. The device is equipped with a 4-digit LED display in a 4 x 20 mm size. In addition, the tool is designed in a wall mounted ...
... wall or pipe mounted casing IP66 Intrinsic safety certificate Application and function The WW-11ALW digital indicator is designed to be used with any device with a 4…20 mA. The WW-11ALW has a configurable ...
Materials: (1-2) Numerator case: Reinforced polyamide. Oils and greases resistant. (3) Fixing grub screw: K600: Steel C45 quality. K600CIN: Stainless steel, (Aisi 304). (4) Shaft bush connector: K600: Automatic steel. K600CIN: ...
Boteco
The indicators of flow of CV series allow a visual inspection of the passage of liquids in hydraulic systems. The propeller is coloured for better visualization with opaque liquids. The indicator is ...
VAL.CO srl
... pipe Visibility 360° The indicators of flow of FD series allow a visual inspection of the passage of liquids in hydraulic systems. The propeller is coloured for better visualization with opaque liquids. The indicator ...
VAL.CO srl
... liquids, or grease-free ball bearing for air and gases ●Rotor visible from 360 ° Characteristics Mechanical flow indicator, for fluid media, with rotor for quantitative flow display. The rotor turns in proportion ...
VAL.CO srl
The ITP11-W is a universally-applicable display unit for monitoring of industrial processes. Scaling and square root functions are available. The ITP11-W is designed to be connected to sensors or transmitters with a 4-20 mA output. The ...
Flow indicator for liquids sturdy construction high reliability Operation: The models FAA are impeller-flow indicators.
Flow indicator for liquids sturdy construction high reliability Operation: The models FRA are impeller-flow indicators.
INIFLU sight flow sight indicators with 360° view allow the user a total view of the fluid line from any point; facilitating the detection of anomalies, such as color, bubbles, intermittent flow and accumulation ...
Description Mechanical flow indicator for all liquids and gasses. The ball flow indicator is a single sided indicator. The white PTFE ball rises when there is flow of liquids or gasses ...
Arkon Flow Systems
Description Mechanical flow indicator for all liquids and gasses. The Spinner flow indicator is a single-sided indicator. The spinner starts to rotate when the flow starts. The design ...
Arkon Flow Systems
Description The Paddle Wheel flow indicator is a sight flow indicator ideally suitable for visual checks on flow, presence, colour and condition of a liquid. CE marked and fully PED compliant. This model ...
Arkon Flow Systems
... lubrication and coolant systems using oil. These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures ...
Webtec
Visual flow indicators Flow rate0,160 LPM H2O Materials Anodized aluminium Nickel-plated brass - 304 stainless steel Tube: Pirex glassSealing: NBR (standard) FKM EPDM Max pressure 15 bar Operating temperature -10C ...
ELETTROTEC s.r.l.
The TI196 includes an explosionproof connection head and digital indicator for local indication of temperature. Sensors and transmitters are specified separately. Optional Temptran models TT111, TT211 or TT205 will fit ...
... has introduced a range of digital position indicators: General characteristics (depending on model): - 3, 4 or 5 digit numeric dial (red digit for tenths or hundredths), displays up to 9999 - Position indicator ...
ENGRENAGES HPC - CT MECA
... an easy installation filed with a rated combination water-tight enclosed to NEMA 4X and NEMA 6. It is also has a built-in indicator which shows the position of the valve which is basically fit for applications wherein ...
When a Flow Monitor is not required but simple visual indication will be sufficient; these brilliant Sight Indicators are more than suitable. With their sturdy robust design, resistance to high temperatures and glass ...
Position indicators GN 955 are fitted with a direct drive counter with digital read out. Both housing sections are ultrasonically welded. This makes the housing particularly compact and stable. The foam rubber seal ...
... supplied by a long-life battery. Indicators are mounted directly onto the spindle via their hollow shaft, with the torque limiting pin, determining the location of the mounting site. Mounted in this way, the indicators ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining