- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Spray nozzle >
- Sommer-Technik
Sommer-Technik spray nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 3 bar - 6 bar
Media temperature: -25 °C - 80 °C
... bar. Think of tools, extruding plastics, lubricants, polishing, etc. The higher the pressure, the finer the spray mist and the smaller the spray angle. How it works: The fluid hose is either laid ...
Sommer-Technik
Pressure: 3 bar - 6 bar
Media temperature: -25 °C - 80 °C
... metal hose - For low and high viscosity fluids To atomize low and high viscosity fluids (max. viscosity 420 mm²/s). The spraying angle on this atomizer is 90° in reference to air and fluid connection. Operating pressure ...
Sommer-Technik
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... fixed a little above the maximum fluid level in the tank. With compressed air applied, the atomizer will instantly start to spray (a built-in check valve in the hose prevents the fluid level from dropping too fast). The ...
Sommer-Technik
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
When it comes to suctioning and spraying as much fluid as possible, this atomizer is just the right one. It is ideal for scent spraying lines, water humidifying units indoors, or for direct irrigation ...
Sommer-Technik
Pressure: 5 bar - 8 bar
Media temperature: -25 °C - 80 °C
- With or without metal hose - For thing liquids - Minimal lubrication/fine atomizing The compact, economical atomizer, or "The micro-fine oil film“" This atomizer has a simple construction for dependable function. With ...
Sommer-Technik
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... pipes. The 6-fold spray head only measures 14 mm in diameter and can atomize any type of fluid - from oil to water. The 40 cm long stainless steel rod solidly connects the spray head with the distributor ...
Sommer-Technik
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... fixed a little above the maximum fluid level in the tank. With compressed air applied, the atomizer will instantly start to spray (a built-in check valve [vertical position of installation] in the hose prevents the fluid ...
Sommer-Technik
Pressure: 2 bar - 8 bar
Media temperature: -25 °C - 80 °C
... design is ideal for tight spaces. Two stray channels provide a large spray angle and an elliptical spraying range. Contrary to the ZBG, the ZBW is connected perpendicular to the spraying ...
Sommer-Technik
Pressure: 0 bar - 6 bar
... be installed slightly above the max. fluid level inside the container. The fluid is dosed and taken along by the air flow. Spray angle: 30°. Max. air consumption at 6 bar: 70 l norm./min. Sound level: 77 dB. Measuring ...
Sommer-Technik
The automatic sprayer operates similar to windshield wipers on a car. The actuation by hand or foot resp. is taken over by a pneumatic cylinder squeezing a rubber bellows. This cylinder is controllable via a 3/2-way valve. A set screw ...
Sommer-Technik
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining