VERDER lubricant pumps

Flow: 0 l/min - 22 l/min
Head: 0 m - 7 m
Power: 200 W

The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump ...

Flow: 22 l/min
Head: 0 m - 6.7 m
Power: 200 W

Chemical pump - B2 Vario Niro 0207-030 for liquid lubricants and cleaning agents The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable ...

Flow: 0 l/min - 45 l/min
Head: 0 m - 8 m
Power: 260 W

Chemical pump - B2 Battery Niro The Pump Set B2 Battery is suitable for low viscosity, aqueous to slightly viscous media. The set is suitable for the removal of small pads such as Canister ...

Flow: 0.1, 0.2, 0.5 l/min
Pressure: 30 bar

MKx gear pump units include a pressure-regulating valve and pressure-relief valve. Electrical pressure monitoring is performed by an integrated pressure switch, and fill-level monitoring also is possible. These units ...

Pressure: 240 bar

... allows mobile equipment to remain idling with pump power on, but the timer is deactivated, allowing manual lubrication functionality. All pumps include low-level and ...

Flow: 0.8, 1.6, 3.2 l/min
Pressure: 400 bar

... operated piston pump for dual-line or progressive systems The ZPU 01/02 high-pressure, high-volume pumps can be used as a supply pump for small to midsize dual-line ...

Flow: 800 l/h
Pressure: 700 bar

The diaphragm metering pump Orlita® MH has a robust metal diaphragm, which permits precise pump capacities even at very high pressure. The ORLITA® MH has a modular construction and therefore has a versatile ...

Flow: 0.02 l/h - 18 l/h
Pressure: 16 bar - 400 bar

... highest pressures With a capacity range of 0.01 – 18 l/h at pressures of up to 400 bar, the hydraulic diaphragm metering pumps Evolution mikro EMFa and EMHa are extremely suitable for ultra-precise micro-metering in ...

Flow: 7 m³/h - 725 m³/h
Pressure: 20, 18, 15, 14 bar
Head: 0 m - 150 m

W+ is a comprehensive range of premium sanitary end-suction centrifugal pumps designed with maximum operating benefits and minimal life cycle costs in mind. Reliable and heavy duty design Energy efficient ...

Flow: 32 us gal/min - 2,300 us gal/min
Pressure: 14, 20, 25, 18 bar
Head: 17'00" ft - 450'00"

W+ centrifugal pumps from SPX FLOW are designed to achieve total cost optimization with high efficiency and product dependability. They are installed in countless process facilities around the world helping producers ...

Flow: 7 m³/h - 204 m³/h
Pressure: 1.75 bar
Head: 5 m - 97 m

This pump offers strong performance and competitive price/value within the lower spectrum of heavy-duty, centrifugal pump applications. It can be installed in a series without fear of seal failure from ...

... metering of adhesives, sealants and lubricants Gear metering pumps from DOPAG offer all the features that are required in industry today. They meter a wide range of materials, including adhesives, ...

Flow: 120 l/min
Head: 26 m

With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump ...

Flow: 230 l/min
Head: 13 m

... Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 ...

Flow: 240 l/min
Head: 30 m

The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity, also aggressive media. It is suitable for media that flow quickly and neither bond, crystallize nor are abrasive. With this pump ...

Pressure: 0 bar - 80 bar

GMK-A Piston Pump NEW: SMART 2 CYCLE Medium: oil / grease Drive: electric Dosing volume per stroke and outlet in cm³: 0,04 max. delivery pressure in bar: 80 Number of outlets: 1...6 Tank size in l: 0,125 / 0,25 ...

Pressure: 0 bar - 350 bar

GMF-S01 Piston pump in steel design Medium: oil / grease Dosing volume per stroke and outlet in cm³: 0,08 / 0,15 / 0,22 max. delivery pressure in bar: 350 Number of outlets: 1...24 Tank size in l: 2...25

Pressure: 0 bar - 60 bar

GMI-A Delivery Pump Medium: oil Drive: electric Dosing volume per stroke and outlet in cm³: 0,03 max. delivery pressure in bar: 60 Number of outlets: 1...4 Tank size in l: 0,7

Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"

NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...

Flow: 0 l/min - 40.1 l/min
Pressure: 0 bar - 6.9 bar

3/8” non-metallic diaphragm pump The ARO nonmetallic 3/8” PD03P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...

Flow: 0 l/min - 54.5 l/min
Pressure: 0 bar - 6.9 bar

1/2” non-metallic diaphragm pump Flow max.: 54.5 l/min Pressure max.: 6,9 bar Fluid control options for pump with electronic interface (PE05 model): • Solenoid-actuated valve for time-based solenoid ...

The BEKA Xlube is an electrically operated gear pump unit and is a commonly used system for industrial applications. It’s a versatile system and can be used to lubricate the lubrication points with either ...

... air connection All pumps within the range are to be connected to a compressed air supply line. Reservoir Pumps in the P-Series are available with or without a lubricant reservoir. ...

Pressure: 40 bar

... applications. The P26-series pumps function as a multi-line pump where the lubricant gets directly transported to the lubrication points via an air-flow. The lubrication ...

Input diameter: 0.75 in

Drum pumps Pump material: Polypropylene Shaft: Polypropylene Seals: depending on the media Flow rate: ca. 0,3 l/stroke* Hose connection: 3/4” The telescopic suction tube is adjustable ...

Input diameter: 19 mm
Output diameter: 19 mm

Drum pumps Execution for fire brigade with flexible suction hose instead of a rigid tube. Suction hose DN 19 x 4; 1,5 m Discharge hose DN 19 x 4; 1,5 m Flow rate: app. 0,25 l/stroke* In pump ...

Fluid temperature: 90 °C
Input diameter: 1 in

PUMP TUBES MADE OF ALUMINIUM Drive shaft made of stainless steel AISI 316. Hose connection 1” included.

Flow: 9.8 l/min
Pressure: 2,500 bar - 3,000 bar
Power: 33, 30, 45, 41 kW

... high pressure pumps of the M-series deliver pressure levels of up to 3000bar. The M-series pumps are ideally suited for tasks such as cutting, dismantling, decoating and derusting. With the built-in central ...

Flow: 34 l/min
Pressure: 3,000 bar
Power: 95 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 34 l/min
Pressure: 2,000 bar - 3,000 bar
Power: 124 kW

... M-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Pressure: 0 bar - 4,000 bar

... -speed hand pumps for very high pressure up to 4000 bar PMS-PDS Series are the FPT hand pumps on very high pressure. • Hand pumps with ...

Pressure: 0 bar - 3,000 bar

... high pressure hydraulic hand pumps 1600 bar – 3000 bar and 4000 bar. • Manual pumps for very high pressures, light, compact and easy to carry, made ...

Flow: 16 l/h - 1,460 l/h
Pressure: 5 bar - 20 bar
Fluid temperature: -10 °C - 80 °C

... low-pressure range. In principle, high-pressure pumps such as the LEWA ecoflow can also be used here, though it is usually not efficient to do so. Another important reason to use mechanically actuated metering pumps ...

Flow: 0 m³/h - 180 m³/h
Pressure: 0 bar - 1,200 bar
Fluid temperature: -70 °C - 400 °C

... diaphragm process pump has been used everywhere in high-pressure applications. The pump features tried-and-tested, patented LEWA diaphragm technology, absolutely secure and reliable operation and the ...

Flow: 600 m³/h
Head: 384, 365 m
Power: 0 kW - 300 kW

SEMI-AXIAL ELECTRIC PUMPS A pump which has been thoroughly and extensively tested and trialled even for extreme applications, such as in the oil and gas sector, designed to guarantee the highest level ...

Flow: 2,000, 2,400 m³/h
Head: 54, 50 m
Power: 132 kW

SUBMERSIBLE PUMPS FOR WASTE WATER SAER's experience and know-how in the clear water and submersible pumps field has led to the creation of this extensive, Italian-made range of pumps ...

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Pressure: 40 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 2,500 m³/h
Fluid temperature: 80 °C

The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...

Flow: 1,500 m³/h
Fluid temperature: 427 °C

The ClydeUnion Pumps CUP-BB2 is a heavy duty, horizontal, single or two stage, radially split, between bearings, double suction pump, top-top or side-side suction and discharge connections. The CUP-BB2 ...

Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm

The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. ...