|
|
for industries , transport , airports, railway, fire stations, harbours, highways,waste collection companies.
The emergency response kits are prepared in order to meet the widest depollution needs, for spills up to 1200 lt. As commonly known the latest EC and national directives referring to workplace safety and accident prevention, foresee that emergency kits are displaced to contain and absorb possible spills of hazardous liquids.
The kits are available with following configurations:
OIL ONLY: to absorb oil products, even in water.
UNIVERSAL BASIC: to absorb water, hydrocarbons, organic and inorganic liquids, chemicals, solvents, antifreeze liquids, acids and bases.
CHEM: to absorb aggressive chemicals, caustic and toxic liquids.
|
|
HIGH VISIBILITY COVERS FOR MHEOLES
THE ONLY FULL SATURATION OIL BINDER POWDER
The manhole security cover is used to prevent seepages
- Easy to use in case of emergency; it must be just laid down on the manhole
- Made of valuable polymers, hard-wearing and flexible, it adheres perfectly to grounds which are uneven, nubby and cracked.
- Resistant to water, hydrocarbons and to the most aggressive chemicals.
- The cover is practically eternal: after the use it must be only washed before it is ready to be used again.
- Available in 6 different sizes
|
|
High resistance floating barrier, with a total height of 45 cm, projected to have a long durability and to be reliable, requiring only a little maintenance and offering on the other hand years o use. Perfect in case of frequent use and vulnerability to degrade caused by both atmospheric agents and abrasion. It is the perfect floating barrier for protected and calm water with weak currents and it is recommended for petrol plants, industries and governmental organizations of environmental emergency operations.
CHARACTERISTICS:
*Clamp to hold the fabric with an high resistance.
*Rings to enable both the anchorage and the transport
*Double layer fabric to assure a longer durability
*Handles to make the positioning in water and the gathering easier
JR 1205 : *total height 45 cm x 30 mt of longitudinal section
*Chain of 6 mm.
* ASTM connectors (15 cm out of water and 30 cm under water)
|
|
|
|
|
|
FIRE SORB
FIRE-RESISTANT INDUSTRIAL ABSORBENT FOR FLUIDS AND GREASES
* Fire-resistant absorbent made of red spruce granulates treated at + di 600¡C
* Granulometry from 910 to 250 micron. Density 0,170 +- 0,03
* Absorbs 750% its own weight and from 48 to 80% its volume
* Doesn't spread fire. Fire-proof via water : 7%
* Will not turn to mud
* Chemically neutral
* Screened and de-dusted
* Not toxic . Biodegradable. 100% vegetable
* Absorbs any kind of fluids, oil, water, solvents, inks, weak acids and bases, chemicals, greases as well as mixtures and other filth incidentally spread on land.
* Disposal by incineration or landfill collection according local regulations and according the absorbed product.
* Fire classification : M1 (CNPP approved). Approved by CEDRE.
* Made of lignin and cellulose. Contains no clay nor silicone.
* Antislip.
* Recommanded to be used on national roads and motorways : N¡ ABS.2001.10.
* Complies with NF P 98-190 regulation dated february 2002.
* Recommanded to be used by Military Forces (S.E.A.). ADSORBENCY UP TO 750% ITS OWN WEIGHT.
APPLICATIONS:
* In mechanical and precision workshops, car industry, aviation, garages, filling stations, transit areas, roads and motorways, petrochemical industries, etc.
* Absorbs any hazardous fluid on the ground, antislip property, floor cleanup.
* Will not turn to mud when in touch with water and oil.
* High safety use on floors thanks to its antislip properties.
|
|
|
|
|
|
The HCS products act on the hydrocarbon surface tension to break the molecular chain of hydrogen and carbon.
Once separated the elements are encapsulated in a water bolster of water and oxygen and then made "bio".
HOW OPERATE A DISPERSANT SUBSTANCE
Means that in a few minutes we can dispersant the hydrocarbon available in the water, soul, exetera..
The hydrocarbon is on the water surface
Dispersant substance application
Mechanical agitation
Hydrocarbon dispersant and distribution
WITH WHAT SUBSTANCES IS ACTIVE
The neutralizing solution for hydrocarbon HCS, if properly applicated, can mitigate the environmental impact by promoting the subsequent degradation of:
• Petroleum distillates
• Gasolio
• Disel
• Kerosene.
• JP4 aviation fuel
• Hydraulic Oils
• Lubricating Oils
• Ditermics oils
• Aromatics Solvents (Toluolo, Xilolo, Stirolo)
• Aliphatics Solvents (Eptano, Esano, Ragie minerali)
• Alcohols
• Diphenyl
• Glicols
• (Acetone, Metil Etil Ketone).
PRINCIPAL USERS
• Ecological first aid
• Transport nd special waste treatment.
• oil platforms and refineries.
• Petrol deposits
• Sewage treatment plants
• cleaning and remediation industry.
• regional,provincial, municipal institutions
• chemical and petrochemical plants.
• purification plants.
• highways Societies
• rail Companies.
• Fuel Distributors
• Fuel deposits of.
• Airports and ports.
• Ships and boats.
|
|
The products of the CHEM line are used in case of accidental leaks of acid products, toxic liquids, and of gas dissolved in water or generally hazardous.
They considerably contain the evaporation of the products to be dealt and they have a high adsorbency power (absorb up to 16 times their own weight). They are among the few products all around the world which can absorb hydrofluoric acid. In specific cases they can kill some absorbed products.
Ideal sorbents in presence of strong chemical aggressiveness. Added with surfactants to considerably reduce the vapours escape.
|
|
|
|
|
|
BIOLOGICAL CLEANING
LAND AND WATER DEPOLLUTION
CHEMICAL CLEANERS
HIDRO CARBON SOLVENT
The HCS products act on the hydrocarbon surface tension to break the molecular chain of hydrogen and carbon.
Once separated the elements are encapsulated in a water bolster of water and oxygen and then made "bio".
HOW OPERATE A DISPERSANT SUBSTANCE
Means that in a few minutes we can dispersant the hydrocarbon available in the water, soul, exetera.
WITH WHAT SUBSTANCES IS ACTIVE
The neutralizing solution for hydrocarbon HCS, if properly applicated, can mitigate the environmental impact by promoting the subsequent degradation of:
- Petroleum distillates
- Gasolio.
- Disel
- Kerosene.
- JP4 aviation fuel
- Hydraulic Oils
- Lubricating Oils
- Ditermics oils
- Aromatics Solvents (Toluolo, Xilolo, Stirolo).
- aliphatics Solvents (Eptano, Esano, Ragie minerali).
- Alcohols
- Diphenyl
- Glicols
- (Acetone, Metil Etil Ketone).
- Concentrated fast-acting
- Water based
- Not flammable
- 100% biodegradable
PRINCIPAL USERS
- Ecological first aid
- Transport nd special waste treatment.
- oil platforms and refineries.
- Petrol deposits
- Sewage treatment plants
- cleaning and remediation industry.
- regional,provincial, municipal institutions
- chemical and petrochemical plants.
- purification plants.
- highways Societies
- rail Companies.
- Fuel Distributors
- Fuel deposits of.
- Airports and ports.
- Ships and boats.
|
|
Absorbents of the OIL ONLY series are made of PP fibre.
They join high absorbency (up to 20 times their own weight) to a significant cost saving. User-friendly and reusable, they fit any spill of oil, hydrocarbons, paints and solvents both on land and water.
|
|
|
|
|
|
THE ONLY FULL SATURATION OIL BINDER POWDER
Specially designed to absorb oil, grease, petrol, gas oil, paints and chemicals in working areas.
It's a user-friendly product (same usage as the common saw dust) with unique features. Just think that OKO PUR can even absorb oil in the water, forming big agglomerates easy to be recovered. In this way OKO PUR reduces the oil content in the polluted water of more than 95%. OKO PUR is available both as powder and as granules.
OKO PUR has got an enormous absorption capacity: a 8 kg bag absorbs 30/80 kg of liquids.
OKO PUR, both as powder and as granules, has been certified as excellent sorbent for heavy traffic pavements. German Home Office (BMI), in the paragraph called "Removal of the oil rests on heavy traffic pavements" specifies that after making use of sorbents for the elimination of the polluting substance and the following polishing with a water-detergent mixture, the pavement must afford again a good sealing power, in any case not lower than 80% of the original value, especially if it?s damp.
THE TEST MADE WITH OKO PUR GAVE 0% DIFFERENCE IN SEALING POWER. PRACTICALLY THE PAVEMENT HAS RECOVERED ITS ORIGINAL SEALING POWER. THIS IS A SURPRISING RESULT WHICH PUTS OKO PUR AT THE TOP OF THE SORBENTS RANKING.
In carrying out the obligations laid down from the Italian Home Office, the local Districts prescribe that on road pavements only approved sorbents with MPA-IIIR certificate can be used. Each OKO PUR bag has got the approval label.
OKO PUR granules is the ideal sorbent in case of road accidents with hazmat spills.
|
|
A citrus based solvent . It has a pleasant smell and
dries quickly without leaving residues, it is not toxic
and harmful. Flash Point ‘42 ° C. A highly efficient citrus based solvent
degreaser for the removal of heavy oil, wax, grease, asphaltines and bitumen emulsion. LEM SOLV’ is in agreement with the Montreal Protocol for
the reduction of ozone chemical depletion.
APPLICATIONS:
Use either as a contact, dip,immersion or spray on degreaser.
Apply undiluted to the oil contaminated area allow a contact time of 10-
15 minutes before rising with water.
|
|
All our spill pallets, racks and mounts are manufactured with rotomoulding in a single HDPE piece, UV treated, with ISO 9002 certificate for food industry and compatible to a large number of chemicals.
They are stackable when empty and are provided with removable plastic grid for easy cleaning.
Safe, resistant, efficient, long-life and user friendly.
Our nice shape spill pallets are yellow painted with following advantages: to call attention avoiding accidental bumps and easy identification of drum leakages.
|
|
|
|
|
|
Station for the temporary storage of waste oil, with palletised steel basin and vessel with threaded opening, remouvable filter-draining, clock level indicator and stainless steel flame trap, loaded with activated carbons for tank breathing and to prevent dangerous fumes when opening.
Vessel in anti-oil, anti-acid, shockproof, with UV treatment for permanent exposure to atmospheric agents , according to OSHNER, DIN and AFNOR regulations, single moulded, reinforced.
3 mm carbon-steel basin with structural reinforcements.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins.
Safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Trial testing at full load for 48 following hours at atmospheric pressure at room temperature.
|
|
Rectangular steel container for temporary storage of fluorescent light tubes and light bulbd. Flap lid.
Forkliftable.
Removable inner Big Bag included.
Exterior corrosion-proof treatment by oil- and acid- proof polyurethane resins, painted in safe visible colours . Safety labelling according in force regulations.
|
|
JOINABLE SPILL RACKS
* Reinforced plastic joinable spill rack.
* Ergonomic and steady structure.
* High load capacity grid.
* Sump capacity 80 lt.
* Drop-proof joints on both sides.
|
|
|
|
|
|
3 mm carbon steel construction. Bent with a fibre system and equipped with structural reinforces.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins, safe in compliance with ISO 3864 and CEE 77/576 - L 229 regulations and following modifications. Hot-galvanized carbon steel grate with heavy load resistant handles, put on the ?L? welded profile perimetre and ( for some models) central reinforced omega.
Each drum rack has a safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Registration and trial testing by hydraulic test made at full load for 48 following hours at atmospheric pressure at room temperature, in compliance with legislative decree of 11/05/1999 n. 152, DPR 915 of 10/09/1982 and following modification.
SAFELY LABELING
PRODUCT IDENTIFICATION LABELING
SINGLE PACKING
OPTIONAL ITEMS UPON REQUEST:- SPECIAL COLOURS - SPECIAL RESINS - COMPANY LOGO - STAINLESS STEEL COVERING - GRIDS
|
|
CONTAINERS FOR EXHAUSTED BATTERIES
84/P:
HDPE Container with steel cradle for temporary storage of different waste, assembled and labelled for specific usage. Made of anti-oil and antacid polyethylene, UV treated to permanent exposition to the atmospheric agents, compliant with OSHNER, DIN and AFNOR regulations.
Single mould, reinforced carbon steel cradle allowing the container stacking, lifting, forklifting and tilting.
84/L:
HDPE container for temporary storage of different waste, exhausted batteries, assembled and labelled for specific usage. Protection cradle entirely made of WATERTIGHT steel.
Personal safety and antipollution labelling in compliance with national and community laws.
|
|
Big Bag for dangerous waste with UV inhibitors.
Reinforced by polyethylene liner, airtight.
Four lifting straps, 30 cm long, breaking load kg 1500.
Duffle top and plain base without discharge spout.
BIG BAGS UN APPROVED
UN 3/Y approved Big Bag with max. load 1000 kg.
Breaking point 6/1 with identity labelling, approval number "R" on yellow bottom as foreseen by D.l. 52 dated 03.02.1997.
Complete with liner.
|
|
Rectangular steel container for temporary storage of fluorescent light tubes and light bulbd. Flap lid.
Forkliftable.
Removable inner Big Bag included.
Exterior corrosion-proof treatment by oil- and acid- proof polyurethane resins, painted in safe visible colours . Safety labelling according in force regulations.
|
|
CONTAINERS FOR EXHAUSTED BATTERIES
84/P:
HDPE Container with steel cradle for temporary storage of different waste, assembled and labelled for specific usage. Made of anti-oil and antacid polyethylene, UV treated to permanent exposition to the atmospheric agents, compliant with OSHNER, DIN and AFNOR regulations.
Single mould, reinforced carbon steel cradle allowing the container stacking, lifting, forklifting and tilting.
84/L:
HDPE container for temporary storage of different waste, exhausted batteries, assembled and labelled for specific usage. Protection cradle entirely made of WATERTIGHT steel.
Personal safety and antipollution labelling in compliance with national and community laws.
|
|
Safety containers for temporary storage and collection of different kinds of garbage (to be agreed with the order).
Made of shock-resistant oil-proof polypropylene, UV treated for permanent exposition to atmospheric agents according OSHNER, DIN, AFNOR regulations.
Single reinforced moulding.
Available safety-labeling for all models complying with national and EC regulations(D.L 22 of 05/02/97 D.L 626/94, D.L. 915/82 and following modifications).
Resistant to temperature between -10e and 100C.
|
|
|
|
|
|
3 mm carbon steel construction. Bent with a fibre system and equipped with structural reinforces.
Weldings with electronic control of the edges and of the gaseous mixture to assure perfect waterproofing. Layout, tolerances, rims, chamfers, nominal weight and finishing grade according UNI parameters.
External anti-corrosion treatment obtained with visible anti-oil and antiacid resins, safe in compliance with ISO 3864 and CEE 77/576 - L 229 regulations and following modifications. Hot-galvanized carbon steel grate with heavy load resistant handles, put on the ?L? welded profile perimetre and ( for some models) central reinforced omega.
Each drum rack has a safety labelling for accident and pollution prevention in compliance with current, EC and national regulations (D.L.22 of 05/02/1997, D.L. 626/94, D.L. 915/82 and following modifications.)
Registration and trial testing by hydraulic test made at full load for 48 following hours at atmospheric pressure at room temperature, in compliance with legislative decree of 11/05/1999 n. 152, DPR 915 of 10/09/1982 and following modification.
SAFELY LABELING
PRODUCT IDENTIFICATION LABELING
SINGLE PACKING
OPTIONAL ITEMS UPON REQUEST:- SPECIAL COLOURS - SPECIAL RESINS - COMPANY LOGO - STAINLESS STEEL COVERING - GRIDS
|
|
Safety containers for temporary storage and collection of different kinds of garbage (to be agreed with the order).
Made of shock-resistant oil-proof polypropylene, UV treated for permanent exposition to atmospheric agents according OSHNER, DIN, AFNOR regulations.
Single reinforced moulding.
Available safety-labeling for all models complying with national and EC regulations(D.L 22 of 05/02/97 D.L 626/94, D.L. 915/82 and following modifications).
Resistant to temperature between -10e and 100C.
|
|
All our spill pallets, racks and mounts are manufactured with rotomoulding in a single HDPE piece, UV treated, with ISO 9002 certificate for food industry and compatible to a large number of chemicals.
They are stackable when empty and are provided with removable plastic grid for easy cleaning.
Safe, resistant, efficient, long-life and user friendly.
Our nice shape spill pallets are yellow painted with following advantages: to call attention avoiding accidental bumps and easy identification of drum leakages.
|
|
JOINABLE SPILL RACKS
* Reinforced plastic joinable spill rack.
* Ergonomic and steady structure.
* High load capacity grid.
* Sump capacity 80 lt.
* Drop-proof joints on both sides.
|
|
Oil and gasoil spills on road surfaces are very dangerous and need to be container immediately and effectively, above all on selfdraining asphalts.
Traditional methods to contain these spills, above all the big ones, are not always practical and as a consequence they are expensive for manpower and required materials.
ROAD BIO gives following benefits:
- Quickly removes and digests hidrocarbons spills.
- Doesn't contain hazardous components.
- Non flammable.
- Contains biodegradable agents which lift pollutants also from porous surfaces.
- Enzym based product with specific bacteria for oil.
- It's easy to use and has no risks for health and environment.
- 1 lt. ROAD BIO cleans 1,5 - 3,5 m2 surface.
- ROAD BIO is registered in Germany as environment friendly biologic remover by the Umwelt Bundes Amt.
|
|
OT8 is a viscous liquid that contains a blend of biological enzymes and bacteria to digest oil stain to completion.
OT8 don't damage any kind of surface except for asphalt and termac, this product isn't acid and corrosive.
Excellent to descaling cisterns from tar residue.
|
|
|
|
|
|
DESIGN : open space container for hazardous and pollutant materials storage
- MANUFACTURING: 2 - 3 and 5 mm carbon steel. Sturdy and high flexibility profile steel structure. Equipped with structural supports and upper crane eyes.
- SUMP : safety and collection sump made of bended carbon steel according UNI 7070 with reinforced structure. Electronic control welding of the edges and gas mixture to grant perfect watertightness. Dimensions, tolerances, chamfers, rims, nominal weight and finishing according UNI parameters.
- TEST: Registration and trial test with hydraulic test carried out at full load during 48 hours at atmospheric pressure and room temperature.
- CE: Project and technical protocol as per "CE" regulation.
- GUARANTEE : 36 months guarantee - 10 years guarantee for passing through corrosion.
- INSURANCE : insurance policy with Messrs. ACE EUROPE (Lloyd's of London group) covering every product you buy against environment accidents and civil liability with maximum coverage of 2.500.000,00 Euro.
|
|
|
|
|
|
Electrogalvanized steel sheet construction, thickness 1/1, 5/2 mm, cold bended with outside monolithic structures painted by antiacid
epoxy paints and passage through drying tunnel at 200°C.
Special silica calcium insulation (DIN 4102) CLASS “0” REI 120 which spreads water molecules with the aim of lowering the inside temperature in case
of fire.
High temperature (800°C) resistant mineral wool panels (without fibreceramics) fixed by ceramic glue.
A - Interior panels with anti-scratch finishing, made of laminates with high resistance to aggressive vapors.
B - Automatic door closing at every opening with automatic locking. Safety locking with key.
C - Certified automatic locking system (70/1000°C) of inlet and outlet air pipings, maintenance free, put on top of the cabinet (back on the UB models).
D - No sparkling natural iron hinge with brass pin allowing doors long life.
E - Thermoexpanding gasket DIN 4102.
F - Spill sump with draining grid to be used as shelf. Load capacity 50/80/100 kg.
G - “Ground” TERMINAL to avoid electrostatic charges.
|
|
|
|
|
|
DESIGN : open space container for hazardous and pollutant materials storage
- MANUFACTURING: 2 - 3 and 5 mm carbon steel. Sturdy and high flexibility profile steel structure. Equipped with structural supports and upper crane eyes.
- SUMP : safety and collection sump made of bended carbon steel according UNI 7070 with reinforced structure. Electronic control welding of the edges and gas mixture to grant perfect watertightness. Dimensions, tolerances, chamfers, rims, nominal weight and finishing according UNI parameters.
- TEST: Registration and trial test with hydraulic test carried out at full load during 48 hours at atmospheric pressure and room temperature.
- CE: Project and technical protocol as per "CE" regulation.
- GUARANTEE : 36 months guarantee - 10 years guarantee for passing through corrosion.
- INSURANCE : insurance policy with Messrs. ACE EUROPE (Lloyd's of London group) covering every product you buy against environment accidents and civil liability with maximum coverage of 2.500.000,00 Euro.
|
|
|
|
|
|
Electrogalvanized steel sheet construction, thickness 1/1, 5/2 mm, cold bended with outside monolithic structures painted by antiacid
epoxy paints and passage through drying tunnel at 200°C.
Special silica calcium insulation (DIN 4102) CLASS “0” REI 120 which spreads water molecules with the aim of lowering the inside temperature in case
of fire.
High temperature (800°C) resistant mineral wool panels (without fibreceramics) fixed by ceramic glue.
A - Interior panels with anti-scratch finishing, made of laminates with high resistance to aggressive vapors.
B - Automatic door closing at every opening with automatic locking. Safety locking with key.
C - Certified automatic locking system (70/1000°C) of inlet and outlet air pipings, maintenance free, put on top of the cabinet (back on the UB models).
D - No sparkling natural iron hinge with brass pin allowing doors long life.
E - Thermoexpanding gasket DIN 4102.
F - Spill sump with draining grid to be used as shelf. Load capacity 50/80/100 kg.
G - “Ground” TERMINAL to avoid electrostatic charges.
|
|
|
|
see the results for the following category : 
