|
|
|
|
|
|
Ascending ropes and hauling systems
Rope clamps are principally used for two purposes: ascending ropes and hauling systems.
Petzl offers two types of devices:
frame-loaded rope clamps,
cam-loaded rope clamps.
For ascending ropes, frame-loaded rope clamps are the most commonly used. They are easy and quick to use, facilitating the passage of intermediate anchors and the transition from rope climbing with a clamp to descending. The cam-loaded rope clamps are recommended for hauling systems and creating adjustable lanyards. Installing them is slower due to the fact that the rope is captured in the device. However because of this, they can be almost permanently attached to the rope. Both types of rope clamps are for use on single ropes.
The Petzl difference
1- One-handed installation at any point on the rope
The spring-loaded catch allows the frame-loaded rope clamps to be installed and taken off at any point on the rope.
2- 3- 4- Ergonomically designed for different uses
The frame-loaded rope clamps have been ergonomically designed for different uses:
- molded handle on the ASCENSION for an comfortable grip,
- the attachment hole on the CROLL is oriented so the device lies flat against the chest,
- the PANTIN's compact rope clamp will not get in the way.
|
|
| ... products without technical information |
| |
NORMAFIX® RS/RSGU
Pipe retaining clips to DIN 3016
NORMAFIX® RS/RSGU pipe retaining clips are ideal for attaching and retaining pipes, cables, cable harnesses, cable ducts, hoses and a wide variety of mains and lines.
- Reinforced band ends = preventing the clip from tearing or loosening in cases where there is a high mechanical load
- Form fitting and adjustable band = ease of assembly = sage attachment
- Optionally supplied with EPDM profile = vibration damping & protection aganist seepage water
|
|
|
|
|
|
One-piece, self locking pipe clamp for safe and efficient installation of cables and tubes
- Simple mounting without locking screws
- Fast mounting
- Listed by IAPMO R&T/UPC®
- Approved by KIWA®, UL®
- Halogen free as per IEC-Norm 754-2
- Burning behavior as per UL94 HB
- Clamping range 8 - 127 mm
- Low height
- Different plastic materials possible
Since 1975 the self-locking pipe clamp CLIC has proved itself millions of times. Cables and pipes fixed with «Swiss Quality» are fast and securely fixed throughout the world.
Today, system solutions (pipe clamps, screws, plugs and accessories) are required, for instance in telecommunications. Consulting during the phase of planning, becomes more and more important. A long experience in business and our internal development division have allowed many individual solutions in collaboration with our customers engineers. Our production is able to preassemble tailor-made CLIC systems even at short notice.
CLIC ideally covers the demands for fixing points in sensitive environments. In many tunnels coaxial cables for radio and mobile telephone systems are openly mounted. The performance may not be impaired by interference from metallic parts. The plastic pipe clamp is therefore the best solution for the installation.
|
|
Specialty - P-Clips
IDEAL® P-Clips 80002 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 15 mm band width. 6 mm hole diameter.
Specialty - P-Clips
IDEAL® P-Clips 80003 Series
Optimal for attaching and retaining hoses, pipes, cables, ducts and lines. Rubber coated. Rounded tips. 16 mm band width. 10 mm hole diameter.
|
|
This is the classic product group. You'll still find products here from the early years which are still very popular with the installers and are processed in large quantities to day.
The newer product series of the anchor and C-profile rails with the accompanying clips and yoke clamps have still a high significance in the everyday workflow, too.
|
|
|
HellermannTyton’s snapper hose clamps are lightweight, corrosion resistant hose clamps manufactured from high performance, thermoplastic materials selected to work well in a variety of diverse environments. A quick, ratchet closure provides for reduced assembly line time and allows for application after connection of the hose. Hose clamps may be applied using one of HellermannTyton's hose clamp tools.
|
|
* Quick and easy installation.
* For clamping cable or tubing securely in place.
* Resists corrosion, salt water, weak acids, grease, and common solvents. This feature is not assessed by UL certification or testing.
* Push in arrows for easy installation with no additional hardware.
|
|
| ... products without technical information |
| |
|
With UnoSet up to 10 Kg (22lbs), with PalletSet W up to 30 Kg (66lbs), with FrameSet up to 100 Kg (220lbs). The product family of the WEDM Tooling System fulfils all the WEDM requirements. Workpieces are preset off-line, while the machine is producing.
|
|
The F-Tool WEDM tooling line features through the simple concept for the professional at the everyday life.
- The F-Tool WEDM tooling assortment is developed by well-known engineers and made of corrosion-resistant, high-quality steel. The system fulfils highest quality claims.
- The basic ruler provide a stable stopper and a clamping beam for large parts and many practical F-Tool clamping elements.
- The system is stable, can be cleaned well and is assembled directly on the basis zero tables of the machines.
- The F-Tool clamping elements can be pushed free in position under the clamping groove after the insertion, before they are clamped on the stopper with the clamping screws.
- The F-Tool clamping elements can be charged with the work piece outside the machine and later be assembled in the machine, system oriented in reference position.
|
|
Fixturing System 4000
for Wire EDM
The Fixturing System 4000 is designed for fast and high precision clamping of workpieces in Wire EDMs. The workpieces can be clamped directly in the beams (Basic Set) or via pallets with fixed workpiece holders to a clamper on the EDM table (Pallet System).
The Fixturing System 4000 fits on all Wire EDMs. All components are made of highest quality stainless steel.
rost-resistand
consistent accuracy
Vacuum hardened function surfaces
compatible with the Fixturing System 5000 and Palletizing System 8000.
|
|
|
|
