|
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Guides by prismatic rails with ball recirculation shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
- 4th axis (brushless).
- Bushless servo motors with CNR3 digital control, 3 axes extensible to 5.
- Vaccum table.
|
|
Electronic :
- Charlyrobot CNR3 micro-step digital control.
- 3 to 5 interpolated electronic axes.
- Communication: serial RS232
- Power supply 240 volts or option 110 volts single phase + earth
- Installed power: 2KW with HF spindle 1.1 KW.
Drive :
- Stepped motor, micro-step management.
- Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
- Guides by prismatic rails with ball recirculation shoes on X and Y.
- Protection of axes by lip seals on X, Y and Z.
- Greaser on guide shoe and drive ball screw bushing.
Options :
- Microlubrification
- Floating suction sensor in Z, for 2D application only.
- Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
- High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
Safety :
- Integral cover with 180° vision, very bright.
- Compliant with the European Directive "machine n° 98/37/CE".
- "Punch button" type emergency stop.
- Cover opening detection.
- Electromagnetic cover locking, controlled by the spindle.
|
|
|
Charlyrobot is the leader in the field with more than 8000 equipment sold in the training centres. These establishments are equipped with digitized axes, of electronic controls, mini-milling machines, numerical milling machines with control or stations of prototyping. You have the formation in line E-Formation.
|
|
CnCut C3 is a mill and engraving machine designed to make accurate cutting out of stone for sinks and cooking tops easy. The entire process is run from the integrated PC Windows® control panel. The user-friendly interface in the modern computer makes it possible to draw, change and save thousands of drawings and figures at the machine without any knowledge of CNC-technique.
The machine includes CnCutCam, a user-friendly software to make CNC programs of any sink or cooking top. The unique open gantry combined with a compact space-saving design allows for any size workpiece without having to take into account the machine tool envelope.
|
|
DATRON M7 :
The new DATRON machining system M7 will substantially increase your machining speed and quality. With a floor space of only 1300 mm x 1300 mm this compact machine offers a machining area of 500 mm x 500 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 60.000 rpm are available, tailored to your application requirements. With this compact and low-priced "power house" the precise ma-
chining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
Equipped with the most modern of drive and control engineering, the HAMUEL portal milling machines make it possible to maximise productivity and enable the greatest possible flexibility in processing of:
- steel
- cast materials
- fine zinc alloys such as ZAMAK, KIRKSITE etc.
- aluminium
- brass alloys
- plastics such as UREOL etc.
- wood
These machines are mainly used:
- aerospace industry
- automotive industry
- model and mould making industry
- mechanical engineering industry
- tool-making industry
- contract production
Machine specifications:
The specification depend exclusively on the customer's requirements, the machining centres in GANTRY design are availble for large parts or finished body shells. The working travel X is variable according to the customers's needs.
|
|
This state-of-the-art CNC machining center features wide box ways and a rigid cast-iron frame and is designed for effective
machining of heavy parts. Large doors provide easy access to the work space. The chips are collected in a chip tray, which can
be pulled out underneath the machine.
24-station tool changer with twin-gripper arm
hardened and ground box ways
servo drives on all 3 axes
an effective coolant system ensures long tool life
automatic central lubrication reduces maintenance
pneumatic tool clamping
totally enclosed work space
Standard Equipment:
|
|
The MECAPRO product line, with its working areas from 1000 x 1500 mm to 2000 x 6000 mm, offers a very attractive performance / price ratio.
The wide choice of spindles and functions will meet all requirements regarding the machining of materials with plates in average thickness such as :
plastics, composites, aluminium, wood and by-products.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm.
|
|
Series GFV/GFY
X/Y/Z CNC Base Units
Series GFV / GFY
Effective travel ranges: from 440 x 480 mm to 1,380 x 2,480 mm, z-axis 220 or 300 mm
Clamping surface: from 625 x 1,100 mm to 1,500 x 3,050 mm
Portal passage: optionally 235 mm or 435 mm
Drive system: DC (series GFV) or AC (series GFY) servo drives, precision ball screw spindle
Travel speeds: 8 m/min (series GFV); 12 m/min (series GFY)
Repeatability depending: on the assembly of the plants; on average approx. 0.02 mm
Weight: 450 kg to 650 kg
Example of use
All linear axes of the linear units LES 5 (x- and z-axis) and LES 6 (y-axis) that are use here run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 spindles with a pitch of, optionally, 2.5/4/5 or 10 mm are used as drives. The linear axes are driven by powerful and robust DC or AC servo motors in easy-to-maintain drive modules.
|
|
The D.L. Ricci Corp. "3 axis" Portable Milling Machines are our most versatile and accurate milling machine tool, capable of traveling and machining in all axis (XYZ). They are ideal for onsite machining large and small rectangular areas accurately. These Portable Mills can be clamped or bolted directly onto the part being machined or fabricated. Setup jigs and parallel-mounting fixtures can be used to position the portable mills for difficult work area conditions. Any machinist familiar with machining practices will find the Portable Milling Machines simple to setup and operate, even upside down.
These milling machine tools are designed for rugged onsite machining such as milling, drilling and boring applications on jobs that were previously thought to be impossible without extensive disassembly. The precision ground dovetails with adjustable gibs, to provide smooth, accurate travel in all axis.
When used as a facing mill, this milling machine tool will do a quick job of facing off pitted or misaligned surfaces, restoring the original condition of the part being machined. Servo power feeds are available for all axis, allowing the application of smooth and consistent power feed throughout the speed range, both in forward and reverse.
|
|
K2X The machines of Extremes
Very high speed and very high precision in 3D-machining.
Precursor of the very high HSM range, the structural calculations have lead to a very high-performance machine : feedrates and working speed up to 60 m/mn and acceleration up to 1g ; powerfull spindle which allows high swarf removal.
Rapidity and power are the best describing the HURON K2X. It allies swarf removal capacity and high machining speeds for 3D-finishing operations.
Milling centres type K2X have a high stability for machining the hardest materiel (machining in 65 Hrc steel have been made).
This milling centre is ideally suited for pieces up to 3000 kg such as injection moulds, foundry templates, cutting tools, aeronautical pieces, precision mechanical parts.
K2X 8
XYZ 700 / 600 / 450 mm
800 x 600 mm / 500 kg
24.000 rpm - 24 kW - 38 Nm
XYZ = 40 m/min
|
|
A modern machine with 5 NC-axes for parts of medium weight up to 6 tons and a working envelope of 2.5 x 2 x 1.2 m erected on an even foundation and featuring performance parameters to meet highest demands in metalworking industry.
The all-around enclosure permits a diameter of rotation of work pieces to be cut of 2200 mm. Chip and coolant discharge facilities are arranged above floor level. Automatic tool and pallet changers sustain universal application of machine as a machining center.
Comprehensive accessories such as various milling heads, NC facing heads and support bearings that can also be changed automatically are to enhance the universal application of this UNION machine.
|
|
TK 419/3 - 3-axis CNC vertical machining center with superior machining capability in Y (1600 mm). It features a clamping system made up of vacuum tables that allow panels and plates to be held by vacuum; this solution is useful to obtain an extremely efficient machining of thin components that could hardly be fixed by means of a traditional clamping system.
The TK 419/3 is equipped with a series of valves that turn on/off different areas of the machining table, thus concentrating the suction on one area and optimizing the clamping of components with limited dimensions.
This machining center is designed for drilling and interpolated milling operations on composite panels, panels and plates in aluminum, stainless steel, titanium and on aluminum profiles.
|
|
Drake GS:RM™Heavy Duty Rack Mills
The Drake GS:RM (Gear System: Rack Mill) produces steering racks for a major automotive manufacturer. Cycle time is less than 35 seconds. Its performance earned an overall perfect ten rating from the auto parts maker.
This four-axis machine features a customized automatic loading system designed to use specific alignment features that assure accurate, quick, repeatable loading. High-powered table vice clamps secure the part and feed jaws accommodate two part configurations with no changeovers required.
An available power helix on the milling spindle assists in fast changeovers to a variety of part configurations producing angles up to plus or minus forty-five degrees.
|
|
Numerical milling machine 3 axes, covering races of 600x500x100mm and, conceived for the tender material machining such as the resins, wood, the plastics, aluminum as well as brass.
This milling machine is compatible with many software or programmable ISO codes some.
|
|
The milling trade-mark of CAZENEUVE. User-orientated machines. They also supply DUFOUR spare parts.
With the FV range, you can have conventional or CN drilling machines adapted to small or mass production and supplied with a complete accessory kit.
|
|
FV 340 CN:
FV 340 with numerical control
Strockes: 1070 x 350 x 490 mm
High capacities and ease of use for a very close work by the piece...
- Continuous variation of spindle and feed speeds. Digital display of the speeds on movable console.
- Visualization on the 3 movements par rulers, increment 1 / 100 mm. Prismatic tracks on the 3 movements.
- 2 distinct spindles, horizontal and vertical, with each an independant motor.
- 2 gear box 2 ranges on the 2 spindles.
- Vertical head, with sliding drilling quill of very large diametre (130 mm) making feasible slanted drilling (slant + or – 45°). Easy and precise orientation of the head thanks to a wheel and an endless screw.
- Ram moving up to 680 mm thanks to a rack.
- Cast-iron structure fonte to ensure high rigidity and maximal accuracy.
- Electric control of automatics with 3 levers.
- Centralized automatic lubrification system for all movements.
|
|
VMX24
Not many machining centers in the world with a 24” X-axis travel that have as small a footprint (85.8x91") as the Hurco VMX24. Even fewer with an accompanying 20” Y-axis travel. Then, packaged with all the additional features, it certainly stands alone.
As with all Hurco machines, the VMX24 comes with the most powerful control available. It’s also rigidly constructed to eliminate vibrations – even under the heaviest cutting conditions. The standard, 10,000 RPM spindle compares favorably to many machining centers costing considerably more.
The 24-station automatic tool changer goes from tool to tool in three seconds. That’s just more evidence that the VMX24 is about speed as much as it is power. The VMX24 can be upgraded to feature a higher-speed, 15,000 RPM spindle.
|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T-Slots
Automatic lubrication
Spindle cartridge cooling system
35HP closed loop spindle motor with two-speed gearbox
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM rapid traverse
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
Description
MAKINO's V-series which has been developed especially for the mold construction offers an extensive performance spectrum and a multitude of constructive solutions. These guarantee permanent process stability and accuracy and the best quality surface finish.
The machining centres of the V-series are distinguished in particular by the rigidity and stability of the components, its outstanding damping properties and the uncompromising design of the machine structure. MAKINO sets new standards for the modern mold construction.
Constant developments in technologies are the basis for fulfilling the requirements of the mold construction with the highest quality of production.
|
|
Our company is specialized in design and construction of NUMERICAL CONTROL MACHINING CENTRES 3, 4, 5 axis for cutting and machining soft materials (aluminium, composites, plastic, wood).
Ranges of application are extremely different (aeronautics, automobil and plastic industries, appearance cover, houseold furniture, naval construction, shaping, molds and patterns...).
Our range represents single and multispindle machines with and without automatic tool changers.
Standard capacities from 2000 mm x 1000 mm to 40 metres x 6 metres.
Machines are designed with :
- moving gantry and fixed table for long products,
- fixed gantry and one moving table for smaller components and two moving tables for higher productivity.
- overhead moving gantry.
High velocity movements due to brushless or linear motors combined with high speed spindles allow increased productivity. The installation of an automatic Tool Changer or multi-spindles also allows the regrouping of different operations within the same machining area.
The efficiency increases by a connection between your CAD system and CRENO CAD CAM softwares :
- complexe 5 axes machine(mould or triming)
- nesting software for optimizing the use of material.
We trust our product range is of interest to you, please do not hesitate to contact us for any further information.
|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T -Slots
Automatic lubrication
Spindle cartridge cooling system
15HP closed loop WYE/Delta spindle motor with options to 30 HP
Spindle options to 15,000 RPM
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM X, Y, Z rapid traverse, Optional 1600 IPM
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
PHANTOMATIC T3 A
CNC machining centre with three controlled axes, designed for machining operations on bars or workpieces made of aluminium, PVC, light alloys in general and steel up to 3 mm thick. It is provided with a 4-place tool magazine, with provision for containing 2 angle machining heads and a side milling cutter, for machining operations on the 5 faces of the workpiece. It also has a traversing work table which facilitates workpiece loading/unloading as well as considerably increasing the machinable section.
|
|
•Full guard, manual door opening
•Console on board LH side machine complete with PC FOMCAM software
•CNC controlled interpolating X, Y, and Z
•Axis sliding X,Y,Z on linear guides with high precision
•X axis movement with DC motor and high pressure reducer
•Y and Z axis movement with DC motors and drive with ground recirculating ball-screw
•Pneumatic rotation of the worktable -90° to 0 to 90°
•Worktable height 850 mm
•Pneumatic vices (n° 4) that translate along the worktable with quick positioning (without use of keys or accessories) (PATENTED)
•Dual working pressure with safety valves for profile stop
•Vices positioning readout on the workable by CN
•Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
•Software automatically corrects tool diameter and length
•Milling capacity: X=3.000, Y=250, Z=120.
•Electrospindle speed: 1000/12000 rpm, 2.2 kW
•Microdrop lubrication
•Set-up for central greasing for recirculating ball-screws and linear guides
•LH and RH profile pneumatic stop
•The profile being machined can be greater than the X milling depth (3.000 mm) alternatively using the pneumatic stops on the left and the right of the machine.
•Air working pressure required 7 bar
•Work cycle air consumption 24 Nl
•Chip bin
|
|
Description
The S33APC vertical machining center utilizes a 40 taper, 13,000-rpm spindle with the stiffness and rigidity required for hard cutting applications and the speed necessary to provide high surface quality for demanding die and mold applications. Heavy cast construction and an axis configuration with no overhangs ensures high machine rigidity, resulting in outstanding accuracy over the full range of travel. It is capable of maintaining positioning accuracies to within ±.0001 inch (.003 mm) and repeatability of ±.00008 inch (.002 mm).
|
|
|
