|
|
Battery Driven Grease gun LAGG 400B
Quick and easy grease filling
The SKF Battery driven grease gun LAGG 400B is a high quality grease gun suitable for lubricating bearings, machines, vehicles and other applications. Ergonomically designed and user friendly, the grease gun can be used with standard SKF grease cartridges (420 ml) or filled with approximately 500 cm3 (17 US.fl.oz) of loose grease.
Compared to hand operated grease guns, a 420 ml cartridge can be emptied in approx 10 minutes with minimum effort, resulting in significant cost and time saving
-Electrical operation and the ergonomic design of hand grip helps reduce operator fatigue compared to manual methods
-Easy-to-use one hand operation makes the grease gun user friendly
-Supplied with various electrical plugs and two power supply versions (230 and 110 V charger) makes it operational worldwide
-Battery operation allows use in almost all environments without use of a mains supply
-Long battery life of 1000 charging cycles helps reduce product life costs
-Refillable: grease filling nipple and de-airing valve allow filling up by filler or grease pump
-Safety valve setting set to 40 MPa (5 800 psi) helps increase operator safety
-Supplied with M10x1 nozzle, interchangeable with SKF hoses, SKF grease meter LAGM 1000E and other accessories
|
|
|
Pump is pneumatically operated i.e. through pneumatic line, connected to the ports of cylinder. The cylinder is built in with the pump. During ON period of the pneumatic line, piston inside the cylinder is pushed, ejecting out pressurized grease from the outlet port of the pump body. During reverse flow of pneumatic line, grease is sucked through the suction port in the pump. Spring force through follower plate exerted on the top surface of the grease (filled in the reservoir) makes the suction of the grease positive and easier. The grease thus filled in cylinder is ready for ejection. Pump is mounted on machine frame.
|
|
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work.
|
|
APPLICATION:
For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc.
FUNCTION:
By pressurizing the pneumatic cylinder the piston is lifted thus closing first the suction port. Then the lubricant inside the cap is being displaced via valve seat and ball into the piston chamber. When the piston is moving upwards, the cross bore provided, having an annular grovve, reaches the outlet ports.
These ports are not on the same level so that the lubricant is discharged alternatvely, in a premetered quantity. Relieving the pneumatic cylinders returns the piston into is initial position thus recharging the chamber between piston and cap with lubricant.
With single-line and progressive systems the total feed volume of the pump is taken from outlet "X"; through the "Y" port, in single-line systems on the other hand, the lubricant, when depressurized, is returning into the reservoir. The parameter determining the minimum pulse frequences is an empirical value dependent upon lubricant, air pressure, number of outlets, and, last but not least, piping cross- sections and length of main feed line.
|
|
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with a positive displacement unit (PDU) or with metering flow unit systems. The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can use Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240
|
|
|
Electrically operated Pump of 12V/24V DC It has built-in reservoir. These type of pumps are quite accepted on earthmoving equipment like shovels, dumpers, excavators, buses and trucks. These pumps have different plunger pumps which are connected to the secondary block on the chassis. Normally 3 plunger pumps are sufficient to cover 25-30 points. The pump is so designed that no foreign particle goes into its reservoir The reservoir once filled with grease is sealed with lock and key arrangement.
|
|
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
The DIP range of pumps was developed for operation in industrial systems. Excellent vacuum performance data combined with the inherent ruggedness of this kind of pump, make our DIP pumps a reliable component in high and medium vacuum applications.
Advantages to the User
High pumping speeds in the fine and high vacuum ranges
Low attainable ultimate pressure
Integrated, water-cooled cold cap baffle guarantees low oil backstreaming rates into the vacuum chamber
Low oil losses (even at high gas throughputs) by integrated, water-cooled forevacuum baffle
High forevacuum resistance even at reduced heating power
The heating cartridges are accessible from the outside via heating inserts which are built into the boiler. This ensures a quick exchange of single heating cartridges (even when the pump is hot)
A separate automatic circuit breaker for each heating cartridge ensures a high level of electrical safety
A standard built-in thermostat acts as an thermal overload switch and ensures that the heating cartridges can not overheat
All pumps are prepared for installation with an over-temperature switch (optional) for checking the cooling water circuit, and a contact thermometer (optional) to monitor the operating temperature of the diffusion pump
Indication of the oil level by sight-glass permits simple checking of the current oil level
All DIP pumps are delivered with their inside chamber cleaned in such a manner that it is free of oil. The inside is evacuated. In the condition as delivered, the pumps may be also operated with silicone oil
Typical Applications
The diffusion pumps from the DIP range are used in coating systems, vacuum melting and drying systems as well as in vacuum furnaces in the area of metallurgy
|
|
|
Their special design with low weight and small dimensions make the UVD units extremely compact and reliable. This is achieved through the direct assembly of rotor on motor shaft and a powerful centrifugal fan for cooling. UVD vacuum pumps are suitable for evacuation of small, closed systems with residual pressure of up to 120 mbar.
|
|
An elastomer diaphragm is moved up and down by an eccentric. On the down-stroke it draws the air or gas being handled through the inlet valve. On the up-stroke the diaphragm forces the medium through the exhaust valve and out of the head. The compression chamber is hermetically sealed from the drive mechanism by the diaphragm. The diaphragm pumps transfer, evacuate, and compress completely oil-free.
|
|
oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
|
|
SA.3 - SA.3TV
Oil free vane vacuum pumps
Limited weight and dimensions are possible by the monobloc industrial design type with the rotor directly assembled on the motor shaft.
Mainly built with light-weight alloys, they can be fitted where there is limited space, provided there is good ventilation. Perfect leak tighteness is achieved by Model TV thanks to the special design combined with FKM gaskets.
Standard equipment includes:
Silencer at the exhaust (SA.3)
Thermal protector (130°C) (1~only)
Model SA.3 is suitable for use as a compressor; see technical features and accessories on page 26 and 31.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
