|
|
The environmental conditions found in pharmaceutical autoclave chambers are extreme for any equipment. These conditions are a major cause of sensor failure in chamber/load probes, due to the ingress of moisture into the sensor and the unacceptable leakage of steam/condensate through the bulkhead connection.
The Sterimaster® Chamber/Load Sensor has been designed to withstand these conditions and offers a reliability factor surpassing anything previously obtainable. Every weld undergoes NDT examination and each completed assembly is leak tested.
|
|
Screw-in RTD thermometers ET521 and ET522 with replaceable measuring insert and terminal head are preferred for measuring temperatures in liquids and gases. Applications include HVAC and refrigeration, heating installations, ovens, furnaces and plant engineering, as well as process technology.
- For temperatures from -50..+500 °C
- As single or twin resistance thermometer
- Pt100, Pt500, Pt1000, PTC1000 or NTC sensor
- Selection of DIN B types and miniature terminal heads
- Integrated thermowell with AISI316 s/s thread-connection
- Transmitter options with outputs 4-20 mA and RS485 Modbus RTU
|
|
These RTDs cover the full temperature scale of the international standard EN60751. Precision sensing elements and nickel alloy sheaths are capable of measurements from -200 to 850°C (-328 to 1562°F) with typical ice point drift less than ±0.05°C.
600°C models have stainless steel sheaths for reduced cost. They use the same element structure as 850°C models for excellent accuracy and stability.
- Platinum elements to EN60751, Class A or B
- English and metric diameters
|
|
|
Conax Technologies offers thermocouple assemblies specifically designed for durability and reliability in applications to 4200˚ F (2315˚ C). Such applications generally involve oxidizing, reducing or inert gas atmospheres that challenge the life of the thermocouple. Numerous options in thermocouple type, sheath materials and termination styles are available. Assemblies can also include adjustable mounting fittings, thermowells and ceramic tubewells.
|
|
Push-in thermocouple probes with terminal head are intended for industrial measurement of high temperatures of hot gases and fluids at pressure ~1 bar. The main applications are combustion control, metal, cement, ceramic and glass industries.
-For measuring temperatures from -200 to +1600 ° C
-K, J, N, S or B type thermocouple
-Mineral insulated or thick-wall protection tube made of
heat-resistant alloy or ceramics
-Variety of terminal heads and connection fittings
-Head-mountable transmitters available — to provide
0-10 V / 4-20 mA or RS485 Modbus RTU communication
|
|
In numerous branches of industry heat-treatment and combustion processes play a decisive role during production and in the quality of the final product.
These applications have one thing in common:
Due to the high temperatures thermocouples are almost always used. Besides the non-precious-metalcontaining ones, mainly types E, J or L, K and N, platinum thermocouples types S, R or B are increasingly being used.
These must be protected against contaminating, corrosive and/or abrasive ambient influences.
For various applications we offer different combinations of ceramic and metallic protection resp. mounting tubes. You will find a list of the designs AM and BM, resp. AMK and BMK, resp. AK and BK, resp. AKK and BKK in our product information ''Straight Thermocouples''.
|
|
|
OMEGA® Exotic Thermocouple Probes are designed for use in extreme temperatures, up to 2315°C (4200°F). These probes utilize either Platinum/Rhodium (types R, S, or B) or Tungsten/Rhenium (types G, C, or D) elements, with a variety of insulations and sheath materials. Depending upon the sheath material selected, these probes may be used in inert, oxidizing, reducing or vacuum conditions. The maximum temperature is based on the lowest max. temperature of the element, insulation and sheath material. Five cold end probe terminations are available: replacement probe, subminiature or standard size ceramic connector, heavy-duty standard size, molybdenum-sheathed nylon connector, or transition joint with 72-inch lead wire.
|
|
Tempsens an ISO 9001 company offers a wide range of temperature sensors used in Glass Industry for accurate temperature measurement.
These are:
- Trilevel Thermocouple
- Simplex/Duplex Thermocouple for Fore Hearth/Distributor
- Glass Level Probes for Level Control,
- Thermocouples for Furnace Crown, Bottom, Regenerators and
- Spout Thermocouples
Features:
- Available in R, S, B type sensors with special coating
- Temperature measuring range of 100° to 1600°C
- Protection sheath of recrystallised alumina KER 710(C-799) tube with hole at one end
- Special hardered platinum thimble.
- Specially established quality system
|
|
HT 4010 High Temperature Thermocouple
High Temperature Thermocouple Assemblies Type K, N and Platinum-Platinum Rhodium Thermocouples R,S and B for temperatures up to 1600 °C or higher with primary and secondary ceramic protection tubes. Depending on the process conditions we supply protection tubes from Kanthal, Silicium-Carbide, Tantalum, Titanium, Hasteloy-alloys, Haynes, Monel etc. for temperature sensing applications like blast or carburizing furnaces, kilns, ovens, galvanising baths and fluegas, where their robust construction ensures long sensor life.
|
|
These industrial thermocouples are used in industrial processes where temperatures are very high.
Thermocouples are protected by one or two ceramic protectors. The choice of the tube material depends on the temperature to be measured and on the working conditions.
Connection to the regulating system is made through a connecting head, generally in aluminium, equiped with a ceramic terminal block or a transmitter.
|
|
| ... products without technical information |
| |
Conax Technologies high pressure RTD temperature sensors have proven their durability and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure RTD, 3 Wire 100 Ohm Platinum:
*With integral high pressure welded threaded fitting
*Proof Pressure Tested to: 30,000 PSI @ 68°F (30°C)
|
|
Screw-in RTD thermometers ET521 and ET522 with replaceable measuring insert and terminal head are preferred for measuring temperatures in liquids and gases. Applications include HVAC and refrigeration, heating installations, ovens, furnaces and plant engineering, as well as process technology.
- For temperatures from -50..+500 °C
- As single or twin resistance thermometer
- Pt100, Pt500, Pt1000, PTC1000 or NTC sensor
- Selection of DIN B types and miniature terminal heads
- Integrated thermowell with AISI316 s/s thread-connection
- Transmitter options with outputs 4-20 mA and RS485 Modbus RTU
|
|
These RTDs cover the full temperature scale of the international standard EN60751. Precision sensing elements and nickel alloy sheaths are capable of measurements from -200 to 850°C (-328 to 1562°F) with typical ice point drift less than ±0.05°C.
600°C models have stainless steel sheaths for reduced cost. They use the same element structure as 850°C models for excellent accuracy and stability.
- Platinum elements to EN60751, Class A or B
- English and metric diameters
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Conax Technologies Type J Thermocouple temperature sensor assemblies have proven their durablility and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has the in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure Special Limits of Error Type J Thermocouple:
*Hastelloy C276 sheath and high pressure tube connector fitting
*Design conditions: 20,000 PSI @ 400°F
*Proof Pressure Tested to: 30,000 PSI @ 68°F (20°C)
|
|
Conax Technologies high pressure special limits of error type J thermocouple temperature sensor assemblies have proven their durability and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has the in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure Special Limits of Error Type J Thermocouple:
*316SST Sheath and High Pressure Tube Connector Fitting
*Design conditions: 40,000 PSI @ 600°F
*Proof Pressure Tested to 60,000 PSI @ 68°F (20°C)
|
|
Conax Technologies High Pressure LDPE Reactor Type K Thermocouple temperature sensor assemblies have proven their durability and reliability in a variety of high pressure and high temperature environments. Our extensive knowledge of the science of temperature measurement and the physical properties of materials, enables our engineers to recommend the most effective solutions for your application needs. Conax has the in-house equipment to proof pressure test and certify units for these extreme applications.
High Pressure LDPE Reactor, Type K Thermocouple:
*For high pressure low-density polyethylene (LDPE) plants available with a
carbide coated tip for additional wear resistance.
*Proof Pressure Tested to: 80,000 PSI @ 68°F (20°C)
|
|
|
Conax Technologies offers thermocouple assemblies specifically designed for durability and reliability in applications to 4200˚ F (2315˚ C). Such applications generally involve oxidizing, reducing or inert gas atmospheres that challenge the life of the thermocouple. Numerous options in thermocouple type, sheath materials and termination styles are available. Assemblies can also include adjustable mounting fittings, thermowells and ceramic tubewells.
|
|
Push-in thermocouple probes with terminal head are intended for industrial measurement of high temperatures of hot gases and fluids at pressure ~1 bar. The main applications are combustion control, metal, cement, ceramic and glass industries.
-For measuring temperatures from -200 to +1600 ° C
-K, J, N, S or B type thermocouple
-Mineral insulated or thick-wall protection tube made of
heat-resistant alloy or ceramics
-Variety of terminal heads and connection fittings
-Head-mountable transmitters available — to provide
0-10 V / 4-20 mA or RS485 Modbus RTU communication
|
|
In numerous branches of industry heat-treatment and combustion processes play a decisive role during production and in the quality of the final product.
These applications have one thing in common:
Due to the high temperatures thermocouples are almost always used. Besides the non-precious-metalcontaining ones, mainly types E, J or L, K and N, platinum thermocouples types S, R or B are increasingly being used.
These must be protected against contaminating, corrosive and/or abrasive ambient influences.
For various applications we offer different combinations of ceramic and metallic protection resp. mounting tubes. You will find a list of the designs AM and BM, resp. AMK and BMK, resp. AK and BK, resp. AKK and BKK in our product information ''Straight Thermocouples''.
|
|
|
OMEGA® Exotic Thermocouple Probes are designed for use in extreme temperatures, up to 2315°C (4200°F). These probes utilize either Platinum/Rhodium (types R, S, or B) or Tungsten/Rhenium (types G, C, or D) elements, with a variety of insulations and sheath materials. Depending upon the sheath material selected, these probes may be used in inert, oxidizing, reducing or vacuum conditions. The maximum temperature is based on the lowest max. temperature of the element, insulation and sheath material. Five cold end probe terminations are available: replacement probe, subminiature or standard size ceramic connector, heavy-duty standard size, molybdenum-sheathed nylon connector, or transition joint with 72-inch lead wire.
|
|
Tempsens an ISO 9001 company offers a wide range of temperature sensors used in Glass Industry for accurate temperature measurement.
These are:
- Trilevel Thermocouple
- Simplex/Duplex Thermocouple for Fore Hearth/Distributor
- Glass Level Probes for Level Control,
- Thermocouples for Furnace Crown, Bottom, Regenerators and
- Spout Thermocouples
Features:
- Available in R, S, B type sensors with special coating
- Temperature measuring range of 100° to 1600°C
- Protection sheath of recrystallised alumina KER 710(C-799) tube with hole at one end
- Special hardered platinum thimble.
- Specially established quality system
|
|
HT 4010 High Temperature Thermocouple
High Temperature Thermocouple Assemblies Type K, N and Platinum-Platinum Rhodium Thermocouples R,S and B for temperatures up to 1600 °C or higher with primary and secondary ceramic protection tubes. Depending on the process conditions we supply protection tubes from Kanthal, Silicium-Carbide, Tantalum, Titanium, Hasteloy-alloys, Haynes, Monel etc. for temperature sensing applications like blast or carburizing furnaces, kilns, ovens, galvanising baths and fluegas, where their robust construction ensures long sensor life.
|
|
These industrial thermocouples are used in industrial processes where temperatures are very high.
Thermocouples are protected by one or two ceramic protectors. The choice of the tube material depends on the temperature to be measured and on the working conditions.
Connection to the regulating system is made through a connecting head, generally in aluminium, equiped with a ceramic terminal block or a transmitter.
|
|
|
Significant scientific and engineering enhancements in advanced materials, Pre-Process and In-Process production methods and in-site testing methods are driving the demand for displacement sensors that can handle extremely high temperatures up to 1832°F (1000°C). Contemporary producers of aircraft engine rotational alignment, plate glass, materials testing extensometry, continuous flow steel, now use standardized high temperature Capacitec sensor solutions for in-process applications to control the quality of their production on a real time basis. Qualification testing of disc brakes, jet engine dynamics and high speed shaft rotations also rely on Capacitec sensors. Advanced materials for automobiles, structural components, and aircraft are also tested for strength and durability with the use of Capacitec's line of extensometers and clip gauges.
|
|
|
We offer modification to our standard range of displacement transducers for high temperature capability, as well as versions specially designed for both high temperature and high radiation environments including non-contact, proximity types.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
