|
|
Safety barriers are used as separator cirquits without galvanic separation between intrinsically safe and not intrinsically safe electric circuits. Through the integration of a safety barrier, it is possible to install level probes inside hazadrous areas. The safety barrier as well as the level controller must be mounted outside the hazadrous areas.
- Exchangeable back-up fuse for all safety barriers
- Snap-on mounting on rails: simultanous connection to potential equalisation ground
- Short-cirquit-proof
- ATEX 2053 / 2054 and certifications of all important environments are available
- EMV tested, CE marking
|
|
| ... products without technical information |
| |
Intrinsically Safe Handlamp type SHL 300-Ex
The SHL 300-Ex is a robust Handlamp specifically designed for industrial environments and the firefighting services. Certified for use in potentially explosive areas of Zones 20 and 1 or 20 and 21 in accordance with Directive 1999/92/EC (ATEX 137), this Handlamp boasts a number of innovative functions that maximise the use and ease of operation.
• Zone 0 and 20 certified
• approx. 10000 Lux illumination power – generated by 3 high-power LEDs
• LED service life of approx. 100.000 h
• Robust, anti-static housing – rated to IP 65
• Pivoting head
• Optimum distribution of weight – ergonomic and comfortable to carry
• Battery capacity display – 5 section indicator
• Emergency light function with high brightness
• Flash mode
|
|
Portable Lamps Series 6144, L144
Versions
6144 for use in Zones 1 and 2, 21 and 22
L144 Industrial design
Push button for one-hand operation on head of lamp ON-BLINKING-OFF
With powerful Xenon lamp
focusing adjustable externally to a concentrated point or wide angle area
luminous intensity > 12,000 cd
Filament breaks monitoring of the main lamp automatic switchover to economy lamp in the case of filament break
Light duration approx. 3.5 hours with maintenance-free accu
Microprocessor-controlled charging technology with battery capacity indication by means of five LEDs
High protection IP 65
High stability of the portable lamp thanks to pulling out two racks
Integrated pocket for insertable lenses e. g. diffuser
Colored insert on the rear side of the lamp head - providing visible "backlight" when the lamp is on
Insertable engraveable plate made of plastic - alternatively made of brass
Rugged belt hook made of stainless steel (option)
Charger unit for parking the portable lamp for nominal voltage 12 V/24 V DC and 230 V AC (integrated into one unit) with voltage and
charging current indication
for mains operation: Emergency light functions of the parked portable lamp, i.e. the portable lamp lights in the event of mains failure
for in-vehicle operation: if the vehicle battery voltage is monitored - automatic switch-off of charging if the vehicle battery "fades"
|
|
Model No. RP-BU-E04-5WXXE27
Key Specifications:
•Wattage:5W
•Socket: E27
•Lumen: 240
•Voltage: VAC85-260
•Color Temperature: WW/CW
•Beam Angle: 180°
|
|
-3*1W High Power LEDs as the Light Source;
-Aluminium Alloy Extruded Shape;
-Excellent Heat Sinking Design;
-Long Term Lumen Maintainance & Long Lifespan;
SPECIFICATION:
- Color: Cool White / Warm White
- Luminescence Angle: 30 Degree
- Lumens: 180 LM
- Power Consumption: 3W
- LED pieces: 3
- Working Voltage 90-260VAC
- Lamp Base: E27
- CRI: Ra > 85
- Design Life: > 50,000 hours
- Warranty: 2 years
- Light Degradation: < 5% in 30,000 hours
PACKING DETAIL:
-E27 (Carton Size:320*320*350 mm )
-40 Pcs / NW 5.5 Kg / GW 6.5 Kg
|
|
Intrinsically-Safe LED torch Lite-Ex PL 30
The Lite-Ex PL 30 LED high performance torch is especially designed to
withstand daily use in industrial environments and with the new ‚ring-switch‘ mechanism, operation is made quickly and easily.
• Ex-zone 0 / 20
• 1x high performance LED (3-watt)
• 4000 Lux
• Robust housing
• High protection rating of IP 65
|
|
Intrinsically safe SHL 100-Ex hand lamp
Rugged and functional, the SHL 100-Ex Handlamp has been specifically designed for use in industrial environments with potentially explosive areas (Zone 1) in accordance with Directive 1999/92/EC (ATEX 137).
The SHL 100-Ex has many useful features for a wide variety of applications.
|
|
Range of lights for everyone. Peli™ Lights include Xenon, LED and Halogen lamps that emit an extraordinary bright beam. The extremely powerful, white beam of light enables a perfect vision in the darkness and cuts through rain, smog, fog or cloudy diving conditions. You can choose a Xenon or Halogen lamp for long distances lighting or use an LED lamp that offers brightness with a long burn time and low cost of replacements (lamps and batteries). Available in alkaline and rechargeable versions.
#1900 Mitylite™ 2AAA is made of unbreakable space age Xenoy™ resin with a removable shroud and a shirt clip. Its Laser Spot Xenon™ lamp module can cut through water, smoke, fog, and rain making it a perfect light source for all applications. Accidental turn on and mechanical switch failure is eliminated because of the rotary on/off switch. Submersible to 150 metres. It includes 2-AAA cell Alkaline batteries and a Lite bender. The MityLite™ 2AAA is ATEX and CSA approved.
The safest lights. Peli™ Lights have Safety and Quality Certifications from independent safety organizations from around the world. In Europe they comply with the ATEX Directive, obtaining approvals to Zones 0, 1 and 2 (Categories 1, 2 and 3 respectively).
Submersible to 150 meters. Most Peli™ Lights are submersible (some of them up to 150 meters) thanks to the o-ring seal that fits the head with the rest of the body.
All Peli™ lights are forever guaranteed.
‘You break it, we replace it … forever’
|
|
The P861 LED Lamp provides visual on/off indication of process conditions in both safe and hazardous areas. Available in a choice of six super-bright colours (red, orange, yellow, green, blue and white), they are ideally suited as part of a panel mounting indicator or illuminated pushbutton assembly.
The P861 itself is a standard BA9s intrinsically safe LED lamp which can be supplied as part of a pilot light or illuminated pushbutton or alternatively supplied separately to be used in any standard switch or lamp assembly.
With the LED lamp being current limited to take a maximum of only 20 mA, it is possible to drive two lamps from a single IIC interface without any affect on the brightness.
With the LED's low power consumption, low heat dissipation and long life expectancy, the P861 is an ideal indicator for safe and hazardous areas alike.
|
|
Model No. RP-PAR-A07-12WXXE27
Key Specifications:
•Wattage:12W
•Socket: E27
•Lumen: 450lm
•Voltage: AC85-260V
•Color Temperature: R/G/B/Y/Warm White/Cool White
•Beam Angle: 30°
•Package: 100pcs/ctn
•LED pieces: 12
List in CE,RoHS.
|
|
| ... products without technical information |
| |
IS-mC1 : IS-minialert
► Combined alarm horn & L.E.D. beacon
► Zone 0, 1 & 2 Intrinsically safe
► EEx ia IIC T4 (Tamb.-40 to +60°C)
► Maximum 100dB(A) output.
► 49 alarm tones, 3 alarm stages.
► Array of 6 high intensity L.E.D’s
► 2 flash modes: Double flash @ 2Hz & 1Hz
► Sealed to IP65
► ATEX, FM, IECEx
|
|
IS-L101L L.E.D Beacon
► Zone 0, 1 & 2 Intrinsically safe
► Ex ia IIC T4 (Tamb.-40 to +60°C)
► Alarm accept function (with IS-A105N)
► Can be combined with the IS-A105N alarm
► Sealed to IP66
► ATEX, FM, IECEx
|
|
Reliable, high-brightness visual indication of process conditions for safe and hazardous areas from RTK Instruments Ltd
The DA180 range of Giant LED Clusters, having a 66mm diameter lens, not only provides clear indication from a distance but is also visible from the side. Lenses are available in six super-bright colours and feature an integral current regulator to limit the current to 20mA. This ensures that all colours are matched to obtain consistent brightness across the range including white and blue. Up to two LED Clusters can be driven from a single IIC power source. The lamps are designed to provide a minimum of 100,000 hours of service life.
The DA180 Giant LED Clusters are ATEX Certified to Ex II 2G, EEx ia IIC T4 and are suitable for zones 1 and 2.
The LED Clusters can be supplied as loose parts or pre-mounted in a stainless steel or polycarbonate IP65 box ready for immediate installation on site.
The DA180 range of Giant LED Clusters can be linked into either the LN1000 Intrinsically Safe Alarm Annunciator or one of a number of safe area annunciators.
With the LED’s lower power consumption, low heat dissipation and long life expectancy, the DA180 is an ideal indicator for safe and hazardous areas alike.
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
The DA170 range of LED Clusters provides visual on/off indication of process conditions in safe and hazardous areas. Available in six super-bright colours - red, green, yellow, orange, blue and white - they are standard 22.5mm diameter and seal to IP65 to the panel door.
All six colours are fully current limited and take only 20mA. All are matched for equal brightness including the white and blue versions.
In hazardous areas it is possible to combine LEDs from a single Intrinsically Safe interface, two for IIC interfaces and four with a IIB interface.
The standard LED Cluster can also be supplied fully mounted in stainless steel boxes ready for immediate mounting on-side.
With the LEDs lower power consumption, lower heat dissipation and far greater life expectancy the DA170 is an ideal standard indicator for safe and hazardous areas alike.
|
|
The LN870 Light Tower provides visual on/off indication of process conditions in safe and hazardous areas. Configurable up to five tiers high in a choice of five super-bright colours (red, amber, green, blue and white), they can be built exactly the way you want.
Each tier has a unique prism cut lens and internal reflective cone to improve visibility and requires one LED lamp for illumination which is current-limited to take a maximum of only 2OmA. Available for hazardous area use in both zones 1 and 2, up to two tiers can be driven from a single IIC interface.
There is a choice of pole or direct mounting, both incorporating a special vibration absorber. With the LED's low power consumption, low heat dissipation and long life expectancy, the LN870 is an ideal indicator for safe and hazardous areas alike.
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
IS-mC1 : IS-minialert
► Combined alarm horn & L.E.D. beacon
► Zone 0, 1 & 2 Intrinsically safe
► EEx ia IIC T4 (Tamb.-40 to +60°C)
► Maximum 100dB(A) output.
► 49 alarm tones, 3 alarm stages.
► Array of 6 high intensity L.E.D’s
► 2 flash modes: Double flash @ 2Hz & 1Hz
► Sealed to IP65
► ATEX, FM, IECEx
|
|
Launch of DA132 Intrinsically Safe Multitone Sounder from RTK Instruments
100dBA output with 32 user selectable tones
RTK Instruments Ltd announce the launch of their DA132 Intrinsically Safe Multitone Sounder. ATEX and IECEx certified to Ex II 1G Ex ia IIC T4 and with an output greater than 100dBA, this Sounder is ideally suited for use in areas of high ambient noise. Additionally, for extreme noise levels, it can be linked with our DA135 Intrinsically Safe Beacon to combine audible and visual warnings.
The DA132 Sounder has a choice of 32 tones, including all the major international standards, all of which are selectable using a DIL switch. The unit is easy to install as all the connections are made to the base and the sounder head 'twists and clicks' into the base on commissioning. With the IP65 rugged housing, the DA132 Sounder is suitable for use in harsh environmental conditions of oil, gas and chemical industries.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation advice.
For further information, please contact us
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
|
Intrinsically-Safe Sensor-Temperature Measuring Unit Ex-Pt 720
|
|
| ... products without technical information |
| |
The fast, one-handed tool for loop checks in Ex zones
The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas.The ecom 707Ex is certified in accordance with the ATEX directive (Ex II 2 G EEx ia IIC T4)in Zones 1 and 2.The 707Ex is also certified to operate in accordance with Factory Mutual N.I.Class 1, Division 2 areas Group A-D.
- Large display and simple,,quick-click push
rotary button for easy one-handed operation.
- Simultaneous mA and %%readout for
quick,easy,interpretation of readings.
- mA accuracy of 0.015%%
- 1 µA resolution for mA source,simulate and measure.
- Push button with 25%%steps for fast, easy linearity checks.
- 0--100%"span check ” for fast confirmation of zero and span.
- Internal loop supply,,so you can power and read a transmitter at the same time without carrying a DMM.
Measures V dc to 28 V..0--20 mA or 4-20 mA default start up modes. HART ® compatible resistance is connected in series with the loop supply for compatibility with HART communicators.
|
|
Simply powerful intrinsically safe calibration tool
Two channel simultaneous source and measure capability for calibration of transmitters, Power transmitters with internal loop
supply, Store frequently--used test setups for later use, Pressure measurement to 3,000 psi//200 bar using anyof the 8 intrinsically safe ecom 700PEx Pressure Modules, Pressure switch test function to capture set,reset and deadband values.
|
|
SnapshotTM TIM Tester
By using an appropriate cable accessory kit, our SnapshotTM for Windows* CE portable data collector can be used to verify and configure Trendmaster® Pro systems, allowing field testing and diagnostics of system components such as cables, transducers, and TIMs. A TIM Tester can operate as a single-purpose device, or it can be combined with other available Snapshot CE functions such as vibration data collection/analysis and machinery balancing.
|
|
Why carry a toolbox of gauges and modules? When a Crystal 30 series calibrator can do the whole job!
- small enough to fit in your shirt pocket, everything is built in
- aluminum case and stainless steel sensors make it very tough
- gas or liquid compatible
- Calibrate to full vacuum and high pressure up to 5000 PSI (300 bar)
- accuracy of 0.05% of reading, laboratory accuracy to outdoor field conditions
- calibrated in an environment chamber, duplicating field conditions
- intrinsically safe:
CSA: Exia, Class I, Division 1, Groups A, B, C, D, T4
ATEX: II 2 G EEx ia IIC T4
- 9V battery provides 90 hrs of operation
Pressure is Our Business!
|
|
Intrinsically Safe Pressure Calibrator 718Ex
- Built-in pressure/vacuum hand pump, with vernier and bleed valve, Pressure measurement to 0.05% of full span, using an internal pressure sensor, Pressure measurement to 200 bar using any of the 8 intrinsically safe 700PEx Pressure Modules, Wide range of selectable measurement units for pressure, Pressure switch test funktion, Min/Max hold functions
Also available as a standard non-Ex unit!
Intrinsically Safe Pressure Module 700PEx
To measure a wide range of pressure in an explosive endangered area the range of pressure modules is extended with 8 ATEX compliant modes. These models are compatible with the ecom 718Ex intrinsically safe pressure calibrator and the intrinsically safe multifunction process calibrator 725Ex.
Also available as a standard non-Ex unit!
|
|
|
|
see the results for the following category : 
