|
|
|
|
|
|
TopMessage and TopLab are similar devices and differ only in construction design. TopMessage is designed as a rail mounted device. Signals are connected via clamps.
Message devices can be easily integrated into existing company networks via its Ethernet interface. This means anybody within the network can have access to measurement data using their existing PCs.
Delphin's modular Message devices enables the acquisition of any physical values (e.g. temperatures, pressures, flows, vibration data). Measurement values are stored in the devices already scaled and lineated (e.g. bar, liter/sec, m/min, °C etc.). The scaling of thermocouples and RTD sensors are pre-configured.
A device comprises of 1 or 2 I/O modules which can be combined in any way required. Extension devices can be connected to the basic device, each also having 2 I/O modules. This means Message devices are suitable for both small and large applications.
Each analog input can be separately connected with RTD, thermocouple, volt or 20 mA signals. Expensive measuring transducers are no longer required and potential isolation means there is no need for isolating amplifiers. All I/O module analog inputs are set up as differential inputs.
|
|
Advanced Diagnostics in a Portable, Expandable Package
Not all data collection systems are created equal. With thousands of users around the globe, ADRE PDS's are trusted by machinery professionals in a wide variety of industries for their most advanced diagnostics requirements. ADRE truly is the diagnostic product that customers across industries trust for their diagnostic and data collection needs.
Synonymous with quality and advanced technology, ADRE leads the way.
|
|
|
|
|
|
RogaDAQ 16 datalogger Description:
With the introduction of the RogaDAQ16 USB2.0 data acquisition system, a new age of measurement technology begins.
USB 2.0 / 480MBIT (USB1.1/12MBIT COMPATIBLE)
16 analog input channels (16bit/500kHz max.)
IEPE sensor supply (24V/4mA)
0.125V to 10V input range
Individual preamplifiers
4 analog output channels (16bit/100kHz)
Powerful DSP (255MIPS) for filtering, control etc.
24 digital I/Os
Optional 24bit counter, timer, PWM, incremental encoder
Free drivers for major application software
including DASYLab; LabView & DiaDem drivers & RogaRec Software; FlexPro7 Standard
The RogaDAQ16 is an affordable multichannel IEPE solution. The USB 2.0 interface permits unrivalled portability. Hotplugging the data acquisition unit during operation has now become a reality. The compact and rugged measurement unit with its BNC connectors breakout boxes obsolete. Downward compatibility to USB 1.1 also permits to run this high performance measuring system with older hardware. Simplicity of integration, whether mobile or stationary, has reached a new level.
|
|
|
2 channel USB sound card with IEPE sensor supply. It can be used for noise and vibration measurement.
|
|
VC-2100 - Vibration Comparator
Our line of vibration comparators can serve as your vibration "watchdog" in a wide range of situations in which vibration based judgments must be made, such as in go/nogo vibration testing of products, facilities diagnosis and machine tool cutting tool damage.
Features:
- Simultaneous two-band measurement.
- Digital display function.
- Analog output.
- Headphone output.
- Comparator gate.
- Comparator time delay setting.
- Compact 96 x 96 (DIN) size.
Specifications:
- Number of Input Channels: 1
- Input Range: 0.1 to 50000 m/s2
- Number of Settable Bands: 2
- Measurement Modes: Rms, Peak, Maximum hold, Peak hold
- Output Modes: Analog output, Headphone output, Cal signal output, RS-232C output, Over output
- Comparator Function: Judgements made independantly for each band
- Operation Temperature: 0 to 50º C
- Dimensions: 96 mm x 96 mm x 112 mm (DIN)
- Weight: Aproximately 500 g
|
|
|
|
|
|
SIR-3000 Series
Raid One Data Acquisition
The robust new SIR-3000 series recorders from Sony are a redundant, secure, customizable and networkable solution for today’s critical sound and vibration data acquisition requirements. The dependable new recorders limit the potential of having to repeat critical, difficult or expensive tests due to data acquisition failure.
The SIR-3000 Series features hot swappable, front mounted dual hard disk drives to protect valuable data in a RAID One array. The redundant high capacity 200GB drives insure high volume tests are accurately captured each and every time without the worry and expense of a drive or media failure.
Regardless of the sampling rate, the system accurately records data to the redundant hard disk drives at a 12Mbps recording rate. The test engineer can have direct access to specific data during post processing with the elimination of the need to wind and rewind the tape.
Sony has included data security features including a built-in Nickel metal-hydride battery back up for both main AC and DC power sources that provides an orderly shutdown to prevent data loss. The drive is also key lockable and can be quarantined for maximum-security.
Recording channels can be expanded up to 128 channels with additional units for data input. Two measuring unit options are also offered: the SIR-3032i with a sampling frequency of 48kHz(20kHz) or the SIR-3032W with a 192kHz(80kHz) sampling rate to further customize the system.
|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
|
Snapshot IS provides intrinsically safe data collection / analysis in a convenient, palm-sized package weighing just 1.5 lbs. (680 grams). With both a phase input and a dynamic signal input, it is the industry's only data collector in this size/weight range that boasts both intrinsically safe operation and the ability to capture not just static readings but waveforms, vectors (for balancing and diagnostics), phase information, and spectra. The instrument uses the Microsoft* Windows* CE operating system, is fully compatible with our System 1® software, and features a user interface consistent with that of its larger 2-channel counterpart, Snapshot CE.
|
|
|
FastTracer is an innovative portable triaxial vibration measurement and analysis solution, ideal to be used in different fields of applications such as predictive and routine maintenance, testing, structural analysis, support to research and development, diagnostics, technical assistance and didactics.
|
|
CF-4220Z - Personal FFT Analyzer
A user friendly instrument that brings the power of FFT analysis within easy reach.
Features:
- Compact, ergonomic design and light weight.
- Easy to read 6.4" LCD
- 20 kHz real-time rate.
- Frequency zoom analysis.
- Built-in sensor power.
- Built-in 3.5" disk drive.
Specifications:
- Number of Input Channels: 1
- Frequency Range: 1 to 40 kHz
- A/D Converter: 16-Bit
- Dynamic Range: 85 dB
- Current Sensor Power: 2 mA
- Operating Temperature: 0 to 40º C
- Dimensions: 200 mm (W) x 292 mm (H) x 396 mm (D)
- Weight: Approximately 5.2 kg
|
|
|
|
|
|
The device covers wide wavelength ranges and provides simultaneous measurements at very fast response rates and excellent wavelength resolution. High reliability (MIL STD 810E shock and vibration) is achieved through a rugged mechanical design with no moving parts. Periodic calibration is not required. Input/Output (I/O) is provided through a dual port RAM interface accessed through ADD/DAT bus direct connection or serial (RS232 or USB) communications
The WaveCaptureTM FBGA Series employs a highly efficient Volume Phase Grating (VPG®) as the spectral dispersion element and an ultra sensitive InGaAs array detector as the detection element, thereby providing high-speed parallel processing and continuous spectrum measurements. As an input, the device uses a tapped signal from the main data transmission link through a single mode fiber, then collimating it with a micro lens. The signal is spectrally dispersed with the VPG®, and the diffracted field is focused onto an InGaAs array detector. The control electronics read out the processed digital signal to extract required information. Both the raw data and the processed data are available to the host.
Key Features
- +/- 30pm EOL wavelength accuracy (see FBGA-IRS for higher wavelength accuracy)
- Excellent wavelength stability
- Athermal design enabling battery-operated portable operation
- Frequency response up to 5kHz
- Wide scanning range
- High dynamic range - 50 dB
- Hermetically sealed for use in harsh environment
- MIL STD 810F qualified
- Compact, card-mountable design
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
